Pics and description of my homemade steel hanger.

J

Jonny5

0
Hi all,I'm Jonny, newb to site but been doing Penis Enlargement off and on for a few years, mostly jelqs and pumping, and lurked here for a couple months before joining. Before I start, just wanna say I like this site, and with everybody's input, knowledge, and support, this is changing my life for the better and I am most grateful.

My homemade hanger is similar to others I've seen here, maybe no different at all, but figured I'd share anyways, cuz it cost me nothing but a lil time and some stuff that was already laying around the garage.
The bars are made from a piece of 1/8th or maybe 3/16ths steel bar that was 1" wide. I cut them 3.5" long, then rounded the ends on my bench grinder and smoothed edges with a file. The holes for the bolts are drilled 1/2" from the ends, and I opened one end on one bar for a quick release.
The bolts are just 5/15ths 2.5" long bolts w/ nuts. 1/4" would work just as well. Whenever I get around to it, I'll get wingnuts, but it's no big deal really.
A piece of 550 cord tied in bowlines on each bolt, between the bars when assembled.
I didn't have an S hook, and I think a carabiner works just as well but slower to remove the weight. I use a piece of 550 cord to tie weights together as well, and just clip it on the loop.
Simple to build, and more importantly, very comfortable and effective. I am gaining for sure!!!
For a wrap, I'm using a strip of foam rubber cut from a mouse pad.
I am currently hanging 20 lbs for 20 min at a time with no slipping, pinching, or bad pain (Idk bout everybody else, but I kinda recognize a good pain while hanging more than a couple lbs). Of course a bit of fine adjustment needed after its on but before donning weight to prevent pinching or skin stretching. My goal is lig stretch, and man can I feel that lig stretching!
Here's a pic of the parts and a pic of the assembled hanger.
I am getting great length results with this and I just really wanted to share my homemade, cheap, bombproof hanger.
Phone cam pics kinda fuzzy, my apoligies. Any comments, questions, or snide remarks welcome. :)
 
Pretty cool design, is it comfortable?
 
Jonny5;414665 said:
Gaining big time with this. Comfortable hanging 20lbs, for 20- 30 min sessions.
Click to expand...

What kind of gains have you made so far? Is this hanger all you are using to make these gains?
 
I've gained 1.2" bone pressed stretched flacid length since mid- november. I didn't measure erect, I know I've gained erect length, but nowhere near 1.2".
I try to hang 1.5 hrs a day. 20- 30 min sessions, at 17.5lbs to 22.5lbs, with 20- 30 min breaks. During the break I jelq and stretch a bit, to get the blood flowing back, and to help lessen the discoloration. When I'm done hanging, I pump for 3 or 4, five min sessions. I feel this also helps with the discoloration, and helps with gains of course.
So no, I can't say my gains are from just hanging, no way. I do pump, jelq, and stretch, but not for as long or as intense as I hang.
I do miss a day here and there, but try to make up for it.
 
Added weight :) . Comfortably doing 25, and sometimes 27.5. I often swing the weight around while standing, hanging down. Swing it around in circles, back n forth, and side to side. The side to side can be mad intense!
Gaining big!
Got a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], a fs knockoff, and a bib comin in the mail.
I'm becomin obsessed with pe.
 
hi,
I tried your hanger today. looks good and simple but I have some problems. maybe you can help me. My problem is that the pressure on the glans and where the steel plates push into the penis causes pain when I am hanging more than 10 lbs. I am wrapping with 3-4 layers theraband. slipping is no issue but the pain. hopefully you have some tips that help. If there was no pain it would be extremely comfortable.
 
wurst1;416359 said:
hi,
I tried your hanger today. looks good and simple but I have some problems. maybe you can help me. My problem is that the pressure on the glans and where the steel plates push into the penis causes pain when I am hanging more than 10 lbs. I am wrapping with 3-4 layers theraband. slipping is no issue but the pain. hopefully you have some tips that help. If there was no pain it would be extremely comfortable.
Click to expand...

Why not use some cushioning around the sharp edges, maybe the same stuff that is being used to wrap with, like weather proofing tape. Sharp metal edges against the skin sounds like toucher.
 
doublelongdaddy;416385 said:
Why not use some cushioning around the sharp edges, maybe the same stuff that is being used to wrap with, like weather proofing tape. Sharp metal edges against the skin sounds like toucher.
Click to expand...

I already sticked these rubber like things that I got from my captains wrench onto the plate. but even if that was no problem I still would get pain from the high pressure on the glans.
 
For a wrap for this I use some 1/8" thick foam rubber very similar to mouse pad. I try to get it as close to the base as I can. I also had pain when trying it near the glans. So I really go for an intense lig stretch rather than the whole penis. I set the plates across the top and bottom of my penis, near the base, but I dont aee why ot wouldnt work on the sides too.
Cool to see somebody else trying it! Give it a fair shot and try a thick cushiony wrap that wont slip. Also soften up any edges with a file just for safety, tho the metal parts dont touch my skin.
 
I will try the sleeve from my vac hanger as a cushioning and attach and it at the base.

I had the idea: why not use two of these hangers on the penis at once. one at the base and one near the glans (8-10 pounds is ok for me). it is very possible since the hanger is so small. The advantages I think are clear. Even the force from the hanger near the glans would increase the pull in the ligs. That way you could split the needed weight onto two areas and maybe even get a good tunica stretch.

I would really recommend you to attach the hanger on the sides instead of the top and bottom. The tissues in the CS are very important and very sensitive and you want to do everything to prevent damage. Give it a try and see how it works.
 
I hear ya, but what would be beneficial, about wearing it on the sides, as opposed to top and bottom? I'm not very experienced at this, but I have been hanging like this for a few months, with substantial gains, and no damage.
The idea bout 2 hangers sounds good.
 
damage might just be a matter of time. if it works on the sides, do it. the urethra goes through the corpus cavernosum which is why it's so sensitive and why you don't want do damage it.
 
wurst1;416859 said:
damage might just be a matter of time. if it works on the sides, do it. the urethra goes through the corpus cavernosum which is why it's so sensitive and why you don't want do damage it.
Click to expand...

That was my biggest fear with it. I know when we were designing the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words] pressure points were vital in modifications. The first few models of the Bundle CHamber needed to be reworked until there was an even distribution of pressure. This is what perfected it. I found that 4 points of pressure were too much and the distribution was uneven, when I switched to two points, balanced at the center BOOM, perfection.
 
Lol yea kinda crushes but, I aint bullshitting, I can do 27.5 lbs for 30 min sets.
Wurst1 seems to know what hes talkin bout and dld agreed so ill try it on the sides, thanks for the input. I should just get a bib.
 
there is no need for a bib. just do what you are doing if you are gaining. it's that easy :). never change a running system. the only thing that you could change is the attachment points. If you have a good grip and feel the stretch as you did before, do it. Oh btw. the next good reason to attach it on the sides is that on the top there is that important dorsal nerve. you know what that means ;)
one more advice: don't increase the weight too fast. if you are feeling fatigue, ride it out as long as possible. be happy if you don't need to increase the weight. If you are not familiar with this concept, read everything BIB has written. it is so much worth it.
 
Last edited:
My BIB Starter came in the mail yesterday, and after the past couple sessions, I ain't looking back. All my hanging will be done on the BIB from now on. It's amazingly comfortable.
I started this thread thinkin I didn't want to invest alot of cash into pe, but I have been enjoying the gains too much and had to try the BIB.
For newbs, or folks on a budget I still recomend this hanger, and with the right wrap, it's comforable at moderate weight, but I wanna do more than 30lbs, and it really ain't happening with this.
 
Yupp ... look forward to when Jazz gets the update and I can sift through and find the lost treasures of [words=http://www.mattersofsize.com/join-now.html]MOS[/words] :)
 
Guys are getting smarter in Penis Enlargement with all these ingenious designs that take so little cash and time to invest. Soon guys wont need to purchase anything, certainly never a hanger.
 
Cool!
Thanks, Red, I'm just happy to bring something to the table.
This hanger got me into hanging, when I first started I didn't want to spend anything. This cost almost nothing.
It became more uncomfortable with heavier weight (over 25), but by the time I was up to that weight, I was seeing gains, and justified buying the BIB starter. This hanger is nowhere near as comfy as the bib, but it's great for a newbie who wants to start hanging with minimal investment.
It could be improved, if anybody is handy and feeling ambitious.
:)
 
Good shit! For guys who are just hanging lightly (5-10 pounds) this would be perfect. Make sure you wrap extra good, the metal would hurt against the skin.
 
Jonny5;418464 said:
My BIB Starter came in the mail yesterday, and after the past couple sessions, I ain't looking back. All my hanging will be done on the BIB from now on. It's amazingly comfortable.
I started this thread thinkin I didn't want to invest alot of cash into pe, but I have been enjoying the gains too much and had to try the BIB.
For newbs, or folks on a budget I still recomend this hanger, and with the right wrap, it's comforable at moderate weight, but I wanna do more than 30lbs, and it really ain't happening with this.
Click to expand...

Ok, I guess I'm looking back lol. I've been hanging with my old steel hanger a bit. The discoloration with the bib is severe, and lasts for so long! Discoloration isn't much of an issue with my homemade, 8 hours later, give or take, the bruising is gone. The bruising from the bib lasted 4 days. Maybe I need a diff wrap.
I just use a self adhesive [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap with the bib. I hate to seem like I'm talkin shit about the bib, cuz its comfortable as fuck! I still use it for 25+lbs, but I been slacking in my pe workouts, and now I can't hang the 32 lbs that I was hanging a month ago. I'm doing 22.5 lbs as I type this, and it tolerable.
 
Took some time off for a few months, but have been hanging with this again the past week or so.
Still like it, but haven't gotten past 20 lbs this time. I imagine I will within a few weeks. I remember it getting uncomfortable at 27.5, but still wanna bump this thread for anyone that might wanna make one.
The Bib is more comfortable, but I can't have a purple dick for 2-3 days after hanging. There's little discoloration/ bruising with this and if there's any, it's gone the following morning.
So easy to make, very comfortable with <25 lbs, and no bruising.
I don't use the bib at all anymore, but might have to if I go heavier.

So anyway's I've always used this for hanging straight down, but yesterday I drilled a hole in the closet doorframe, and screwed in a big eye bolt. Clipped a caribiner on it, and cut some lengths of nylon webbing so I can hang from every angle now. I'll probably run the webbing through a pulley instead of the carabiner, whenever I get around to getting a pulley.

Just thought I'd share, cuz it's all inspired by ideas and devices I've read here and seen here, so much thanks to DLD and all the guys that contribute here :)
 
Jonny5;502693 said:
Just thought I'd share, cuz it's all inspired by ideas and devices I've read here and seen here, so much thanks to DLD and all the guys that contribute here :)
Click to expand...


Good to hear from you Jonny! I am glad you are still involved! I would have bumped your thread eventually anyway, but you probably know that:)
 
You must log in or register to reply here.
Back
Top