damn 6.4"MSEG is massive man!
Good luck in your progress! rofl
Good luck in your progress! rofl
A New Hope
pillesnoppen;726402 said:
Thanks mate!
I've just recently realized that I'm pretty girthy. Always considered myself being average/below average. I guess alot of it is "relative perspective/proportions" - since it stuck to my body just next to my legs it will alway look small in comparison but if I'd have a loose object with the same dimensions it would feel alot bigger. Just compared with a Gilette shaving foam can - put it beneath me and girth/width wise I can cover it completely. When I reach my lenght goal I'll be able to cover it lenght wise aswell. But holding the can in my hand It feels huge and alot larger than my tool but in reality its thinner and barely an inch longer! (My foam can is 7.5"x5.8")
So there's another reason to hit the running tracks
bengan;726385 said:Yep, works perfect to track progress but I want to also be able to compare to the studies with avergages etc and from what I read about the clinical studies they center the ruler. In the end my progress really only matters for me and my gf
I see, yes, you are correct in clinical studies the penis is always measured bone-pressed from the center of the pubic bone. In most cases this measurement is done flaccid-stretched, bone-pressed for consistency.
It’s been almost two weeks since last measurement so I planned in a rest day yesterday and measured today around 40h since last [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] session.
I’ve had minimal length progress, but I still look like I’m a bit longer since last time. Two weeks ago I was a sliver below 6.6” and now I’m just below 6.7” BPEL. Girth seems stable at 6.4” MEG which is great. Hopefully by next week I can comfortably say that I’m 6.7” BPEL (centered ruler) which is my next milestone, 17cm, and also the point for my next donation. Keeping my fingers crossed
The last 3-4 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] sessions I’ve had troubles maxing out length wise, I can usually get above 7.3” but it’s pretty difficult to get to 7.5”. On the other side I feel like I’m getting a lot better girth expansion. After the last session I felt a girth “pump” for almost 24hours.
Also I managed to break my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]
the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] tore just below where it fits to the gray hard plastic ring. Have a 2-3” wide tear and when I reach max pressure the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiters[/words] pop off at the tear. So I’ve tried to superglue the tear and also but a cable clamp around but it doesn’t feel like it will hold for long.
I’ve had the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] for just three months so I hope I can get a replacement but I haven’t heard from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]-support yet. Another issue is that the PID Code that’s printed on the pump label has already been washed off :/ Still got the paper manual with the SN on so I hope that I will get help.
Don’t want to lose my momentum so I actually ordered a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] Extreme. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] Extreme was actually 25USD cheaper than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] Extreme and also I want a bit more room because I press too much towards the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] tube walls and I feel a lot of soreness afterwards. I still have room on the underside but when I get above medium pressure I get an angle and after a while into the sessions I usually get some fluid retention and I start pressing towards the sides as well and only got room left on the underside.
When I went from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] it felt enormous and took while before I managed to use it. Hopefully going from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] will be easier.
I’ve had minimal length progress, but I still look like I’m a bit longer since last time. Two weeks ago I was a sliver below 6.6” and now I’m just below 6.7” BPEL. Girth seems stable at 6.4” MEG which is great. Hopefully by next week I can comfortably say that I’m 6.7” BPEL (centered ruler) which is my next milestone, 17cm, and also the point for my next donation. Keeping my fingers crossed
The last 3-4 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] sessions I’ve had troubles maxing out length wise, I can usually get above 7.3” but it’s pretty difficult to get to 7.5”. On the other side I feel like I’m getting a lot better girth expansion. After the last session I felt a girth “pump” for almost 24hours.
Also I managed to break my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]
the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] tore just below where it fits to the gray hard plastic ring. Have a 2-3” wide tear and when I reach max pressure the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiters[/words] pop off at the tear. So I’ve tried to superglue the tear and also but a cable clamp around but it doesn’t feel like it will hold for long.I’ve had the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] for just three months so I hope I can get a replacement but I haven’t heard from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]-support yet. Another issue is that the PID Code that’s printed on the pump label has already been washed off :/ Still got the paper manual with the SN on so I hope that I will get help.
Don’t want to lose my momentum so I actually ordered a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] Extreme. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] Extreme was actually 25USD cheaper than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] Extreme and also I want a bit more room because I press too much towards the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] tube walls and I feel a lot of soreness afterwards. I still have room on the underside but when I get above medium pressure I get an angle and after a while into the sessions I usually get some fluid retention and I start pressing towards the sides as well and only got room left on the underside.
When I went from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] it felt enormous and took while before I managed to use it. Hopefully going from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] will be easier.
doublelongdaddy;727331 said:
Yeah, they prolly got a bunch of X50s they want to clear out. I'm guessing it's not as popular as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words].
Price aside I think getting the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] is the right choice. I had a session yesterday and I took a good look and on the underside of my head and shaft I probably had 0.1-0.2" room left while the top side and the sides where getting pressed hard against the tube. On the head I usually have dent after each session due to getting pressed against the tube. I just hope that I'll be able to manage the larger base of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] and get good sessions out of it. I feel that 6.5" girth is within reach
Still haven't heard from [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] support about my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words], going to give them a couple of more days and send them another mail.
Big Schwanz Acht
@Big Schwanz Acht
There's definitely a learning curve going from The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] to The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words]/X50...opting for the built-in pump model should make the transition much easier tho. Best of luck!
Got the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] today and used it for the first time. Man, I had like all the newbie issues all over again, the thing is huge and hard to handle. Think my biggest issue is with the width of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] sides which require alot more scrotum strech and also the base hole is so damn large so my whole fat pad got sucked in. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiters[/words] are rock hard compared to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] and you have to push like a mad man to compress it. The ball pump is OK but I thnk that the VacuVin can reach higher pressure levels. Everything hurt like hell and I didnt manage to get any good stretch or expansion.
I wrestled with the device for almost and hour when I finally got an flash - I put the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] inside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words]. Tadaa! I got a smaller base hole and a much more comfortable pad. I only got to use this setup for a minute before my GF banged on the door and asked if I drowned in the bathtub or what the heck was up so I had to quit for today. To be continued tomorrow!
I wrestled with the device for almost and hour when I finally got an flash - I put the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] inside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words]. Tadaa! I got a smaller base hole and a much more comfortable pad. I only got to use this setup for a minute before my GF banged on the door and asked if I drowned in the bathtub or what the heck was up so I had to quit for today. To be continued tomorrow!
doublelongdaddy;727552 said:
Lol thanks!
Yesterday I really wanted it to work and after the first session I wasnt happy about the result. I couldnt really get the stretch/expansion I wanted and I still had issues with the angle and pressing on the tubes inside.
I decided to have another session after a couple of hours and I actually felt kind of sucessfull. Im still like half a inch away from my maximum stretch but i got a great session without pressing against the tube walls. Setup was with just the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] which worked pretty well. I put the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] aside.
So a bit of a hassle since the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] pad is alot smaller and I need to enter the tube centered to avoid the walls.
Another amazing feeling is for the last couple of days I cant reach my fingers around without having to squeeze - 6.7" girth without fluid. Today I felt more like 6.4" but hoping it is a signt of progress.
Lenght has felt a bit slow the last 3 weeks. Need to get my intensity up again, hope I can get past all the "hardware" challenges soon.
bengan;727609 said:And I got in touch with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] support yesterday and I'll have to send them my broken [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] which they hopefully can repair.
They will replace it with a new one I am sure
I don't think they fix them I really hope I get my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] repaired and back soon. I feel that I don’t really get the same results with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words]. It feels like my length progress is taking a hit.
Three weeks since last measurement so I planned for a rest day followed by measurement today. Always a bit of a hassle to measure managed to get some figures that I truly believe are correct. BPEL 17.1 cm, with the ruler centered. MEG 16.3 cm. This converts to 6.7”x6.4” which is great as I’ve reached two milestones – I’ve reached past 17cm BPEL and I’ve gained one inch in BPEL since I first started with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] 16th of December.
I’ve plotted my progress in a spread sheet and I got my first half inch after 76 days and the full inch after 117 days. Think this correlates to when I started to get really proficient with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and really maxing out the pressure with the Vacu-vin.
Also since I reached my next milestone in length, 17 cm, I’ve sent another 50USD in donations to show my appreciation and gratitude. Next milestone is 18cm (~7.1”) and I hope to reach it by end of June – keeping fingers crossed for the swift return of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] 
Happy Easter everyone!
Three weeks since last measurement so I planned for a rest day followed by measurement today. Always a bit of a hassle to measure managed to get some figures that I truly believe are correct. BPEL 17.1 cm, with the ruler centered. MEG 16.3 cm. This converts to 6.7”x6.4” which is great
as I’ve reached two milestones – I’ve reached past 17cm BPEL and I’ve gained one inch in BPEL since I first started with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] 16th of December.I’ve plotted my progress in a spread sheet and I got my first half inch after 76 days and the full inch after 117 days. Think this correlates to when I started to get really proficient with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and really maxing out the pressure with the Vacu-vin.
Also since I reached my next milestone in length, 17 cm, I’ve sent another 50USD in donations to show my appreciation and gratitude. Next milestone is 18cm (~7.1”) and I hope to reach it by end of June – keeping fingers crossed for the swift return of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] 
Happy Easter everyone!
6.4MEG is huge! really thick!
bengan;728388 said:I really hope I get my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] repaired and back soon. I feel that I don’t really get the same results with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words]. It feels like my length progress is taking a hit.
Three weeks since last measurement so I planned for a rest day followed by measurement today. Always a bit of a hassle to measure managed to get some figures that I truly believe are correct. BPEL 17.1 cm, with the ruler centered. MEG 16.3 cm. This converts to 6.7”x6.4” which is great
I’ve plotted my progress in a spread sheet and I got my first half inch after 76 days and the full inch after 117 days. Think this correlates to when I started to get really proficient with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and really maxing out the pressure with the Vacu-vin.
Also since I reached my next milestone in length, 17 cm, I’ve sent another 50USD in donations to show my appreciation and gratitude. Next milestone is 18cm (~7.1”) and I hope to reach it by end of June – keeping fingers crossed for the swift return of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] 
Happy Easter everyone!
Congratulations on the gain. Sorry that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] is taking so long, I wish I could help speed the process. Thank you so much for your donations, it really seems like it fuels your gains.
doublelongdaddy;728416 said:
Thanks!
Actually [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] is not taking long - when I sent them a direct mail, instead of using the form on their website, they replied instantly. I only got around to mail them my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] a couple of days ago. So the delays are on my side 😀With easter coming up it will prolly be atleast two weeks before I get a replacement.
Big Schwanz Acht
@Big Schwanz Acht
bengan;728443 said:
I shudder to think what I'd do if my BFF (X40) broke
Big Schwanz Acht;728446 said:
Haha, ya I had a moment of panic when I realized that it broke. Not to worried though - going to get a new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] one way or another. Only thing I'm losing is time and I'm not really in a hurry. Allthough I really whish I had my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] because come summer with all social events and stuff it's going to be a bit more difficult to keep my 6 days a week schedule.
Last edited:
Big Schwanz Acht
@Big Schwanz Acht
doublelongdaddy;728515 said:Your life would be over...I suggest keeping some cyanide on hand
'fraid you're right...it's been a good run, tho
LONGERDICK7+
Active Member
bengan;728452 said:
If you take showers everyday use it in the shower
LONGERDICK7+;728857 said:If you take showers everyday use it in the shower
Hehe, yepp I'll still shower every day and if I could still use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] it wouldn't be a problem.
With the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] I really prefer to sit down. Those devices are huge and since I use the two comfort pads I can't really use it standing up for a longer period.
Usually I spend atleast 40-60 minutes in the bathroom for each session so it's more of a time issue. When I shower I'm in and out in less than 5 minutes.
I really wish I could use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] - if I could I would trade half a inch girth for length.
Since I've been unhappy with the results with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] I've continued my experiements for the last week. I pulled out my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] and it was a dream to handle compared to the larger devices. Problem is that I pack it girth wise from the start and after a minute or so I get expandend and smashing against the tube it just hurts to much.
Using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] I think I finally cracked the code - or atleast my code. The last month my main issue have been the angle when I'm reaching the higher preassure which results in my head getting smashed against the upper side of the tube. I had this in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and even in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words]. But now I found the solution
I've rotated the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] 180 degrees and put it into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words]. This way the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] pad angles a bit toward the down side and I can avoid smashing against the tubes top side. So for the first time for like almost a month I had a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] session I'm really happy with and I know that it will be easy to reproduce!
Just got a mail from [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] - my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] is already in the mail back to me, yay! Have to say that their support have been really fast.
I've also attached a pic of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]/X50 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] set up.
View attachment 32799
I've also attached a pic of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]/X50 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] set up.
View attachment 32799
Last edited:
The wait is over - I got my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] in the mail on monday They actually sent me a brand new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and I have to praise their support, it's on a world class level. Quick, polite, and generous!
Really happy to have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] since I get alot better stretch than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words]. Still fighting the angle and getting pressed against the tube but after just two sessions I can actually feel a difference in stretched flaccid.
I did measure on Monday since Sunday was a restday and it looked like I was 6.9" BPEL but going to wait until next week and another measurment before I officially claim it
They actually sent me a brand new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and I have to praise their support, it's on a world class level. Quick, polite, and generous!Really happy to have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] since I get alot better stretch than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words]. Still fighting the angle and getting pressed against the tube but after just two sessions I can actually feel a difference in stretched flaccid.
I did measure on Monday since Sunday was a restday and it looked like I was 6.9" BPEL but going to wait until next week and another measurment before I officially claim it
Last edited:
Big Schwanz Acht
@Big Schwanz Acht
Congrats!! I know it must have felt like weeks and weeks being w/out your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]...mine is definitely showing its age/use (sticker half peeling, scratches etc.) I may have to think about getting a new one just in case mine bites the dust
bengan;729450 said:The wait is over - I got my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] in the mail on monday
Really happy to have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] since I get alot better stretch than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words]. Still fighting the angle and getting pressed against the tube but after just two sessions I can actually feel a difference in stretched flaccid.
I did measure on Monday since Sunday eas a restday and it looked like I was 6.9" BPEL but going to wait until next week and another measurment before I officially claim it
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words], since the jump, has been our best partner. They have always been honest and faithful to the Brotherhood and we greatly appreciate this. I am so happy you have received the benefits of buying through the Brotherhood.
Big Schwanz Acht;729473 said:
Actually time almost flied since I was busy experimenting with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] - these weeks the length gains have been a bit slower but I've gotten a nice girth increase
Yesterday I almost filled the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words], I was pressing towards the top side of the tube and I only had like 1/4" room left below. Yesterday, with some pump left from the earlier session, my GF was whimpering loudly and could barely take the girth which was a confidence boost. With some expansion left from the session I think I should have been around 6.7", right now, 20 hours since the last session, I'm 6.5".Anyways, length is still has priority over girth so I've retired the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] for now. I'll prolly start using it again towards the winter when I hopefully are close to my final length gains.
Right now I have one big regret and that is that I didn't take any measured starting pictures. I'm 100% sure that I've grown but it would been really nice to have some "before and after" pictures - not to show to others but primarily but more as a visual proof for my brain. The progress is so gradually so I cant really notice it and my brain does really register it
So for anyone reading this thread - do yourself a favor and take a starting pic Big Schwanz Acht
@Big Schwanz Acht
bengan;729605 said:Right now I have one big regret and that is that I didn't take any measured starting pictures. I'm 100% sure that I've grown but it would been really nice to have some "before and after" pictures - not to show to others but primarily but more as a visual proof for my brain. The progress is so gradually so I cant really notice it and my brain does really register it
I have the same regret
Rest yesterday and measurements today. Over 50 hours since the last sessions so any temporary expansion should be gone.
The results are in and I'm really really happy BPEL is 17.4 cm which is 6.85". MEG is over 16,5+ cm which is 6,5+" and I actually think I was closer to 6.7" but I'm a bit uncertain. The measurements was done with a CR as usual just to get consistency.
This means that I've reached my MEG goals that I set for december which is just great. To recap I set a goal of +1.1" BPEL and 0.6" MEG with a one year time frame, and when I started I didn't even believe that PE worked but I decided to approach it with an open mind. Now less than six months later I've reached my one year goal and is a true believer I also like to measure once a week, event though 0.2 CM really falls into the margin of error from positioning the ruler, angle of the ruler etc my 17.4 cm might just aswell be 17.2 cm what I really can say is that one month ago was below 17 cm and now I know for certain that I'm above 17 cm which is great for the motivation.
I think a key factor is keep pushing the limits, make sure that you don't injure yourself but like most training or any area of progress you try to progress in you have to keep reaching for the next step. If you hit the gym or the tracks and don't feel any fatigue or soreness you can be pretty sure that you're not getting any progress. I think its the same with PE. The trick is to know the difference between the "good pain" and the "bad pain". When weight lifting I want to feel my muscles ache and pump but I don't want to feel pain in my joints or get strained muscles. When running I want to feel the burn in my lungs and the fatigue in my legs but I don't want to feel pain my knees or back.
Over and out, I'll be back with new measurements in a week or so
The results are in and I'm really really happy
BPEL is 17.4 cm which is 6.85". MEG is over 16,5+ cm which is 6,5+" and I actually think I was closer to 6.7" but I'm a bit uncertain. The measurements was done with a CR as usual just to get consistency.This means that I've reached my MEG goals that I set for december which is just great. To recap I set a goal of +1.1" BPEL and 0.6" MEG with a one year time frame, and when I started I didn't even believe that PE worked but I decided to approach it with an open mind. Now less than six months later I've reached my one year goal and is a true believer
I also like to measure once a week, event though 0.2 CM really falls into the margin of error from positioning the ruler, angle of the ruler etc my 17.4 cm might just aswell be 17.2 cm what I really can say is that one month ago was below 17 cm and now I know for certain that I'm above 17 cm which is great for the motivation.I think a key factor is keep pushing the limits, make sure that you don't injure yourself but like most training or any area of progress you try to progress in you have to keep reaching for the next step. If you hit the gym or the tracks and don't feel any fatigue or soreness you can be pretty sure that you're not getting any progress. I think its the same with PE. The trick is to know the difference between the "good pain" and the "bad pain". When weight lifting I want to feel my muscles ache and pump but I don't want to feel pain in my joints or get strained muscles. When running I want to feel the burn in my lungs and the fatigue in my legs but I don't want to feel pain my knees or back.
Over and out, I'll be back with new measurements in a week or so
Big Schwanz Acht
@Big Schwanz Acht
bengan;729768 said:Rest yesterday and measurements today. Over 50 hours since the last sessions so any temporary expansion should be gone.
The results are in and I'm really really happy
This means that I've reached my MEG goals that I set for december which is just great. To recap I set a goal of +1.1" BPEL and 0.6" MEG with a one year time frame, and when I started I didn't even believe that PE worked but I decided to approach it with an open mind. Now less than six months later I've reached my one year goal and is a true believer
I think a key factor is keep pushing the limits, make sure that you don't injure yourself but like most training or any area of progress you try to progress in you have to keep reaching for the next step. If you hit the gym or the tracks and don't feel any fatigue or soreness you can be pretty sure that you're not getting any progress. I think its the same with PE. The trick is to know the difference between the "good pain" and the "bad pain". When weight lifting I want to feel my muscles ache and pump but I don't want to feel pain in my joints or get strained muscles. When running I want to feel the burn in my lungs and the fatigue in my legs but I don't want to feel pain my knees or back.
Over and out, I'll be back with new measurements in a week or so
Congrats bro!! I can't agree with you more...always be striving for just a tad more intensity than the previous session. Nicely done!
LONGERDICK7+
Active Member
doublelongdaddy;729753 said:
dam 15 yo and u had a 6.5 incher lucky mike whwn i was 15 i was so small i think lol
LONGERDICK7+
Active Member
doublelongdaddy;729929 said:Yes, I was always very big for my age. I felt big all the way up till I met Jen than I felt small I do not feel that way any longer, I am strong and long and down to get the friction on
yes Sr the past is gone,those memories cant hurt or do us harm..
LONGERDICK7+;729937 said:
No they can not! The past is a graveyard of uselessness and the future is uncertain, we have the moment and that is all and in this moment, which is forever fleeting, we need to dig in and start to work. When we remain in the moment we retain all of our expressive energy, when we give this to the past or future we are squandering time. Time is valuable!
Big Schwanz Acht
@Big Schwanz Acht
doublelongdaddy;729929 said:I am strong and long and down to get the friction on
lmfao...Yes Sir(Mixalot)!!!
LONGERDICK7+
Active Member
doublelongdaddy;730013 said:
true thinking about the future is ok, but can be a mistake when we set our expectations there. Learning to rmain in the moment is something i have to understand and learn..Sometimes im living in the past some other times im thinking about the future..True time is valuable and is a terrible experience seeing it pass by trough our eyes..
Time for an update! Exactly one month since last measurement and for a while I thought that I’ve come to a hard stop and plateaued completely. I could barely see any progress for over two weeks and then I finally made some progress and I’m up 0.3 cm since last month and now I measure BPEL 17.7 cm which equals 6,97” – soooo close to 7”
Getting 7” by end of June feels like a piece of cake now and with some dedication and good fortune I should measure in around 7.1”. ( For reference the BPEL measurement was done 2.5 days after last [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] session and this time without a CR. ) MEG is still at 6.5” but not a priority. I’ve attached a plot over my measure points and It looks like I’ve plateaued a bit but I hope I can keep progressing.
I’ve had a lot of issues with getting good sessions mainly because of my girth and the angle in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] caused by skin at the base. As soon as I get expansion and some fluid retention I get very close to fill my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]. The skin at my base also expands on the underside which angles me inside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] and the head is getting pressed which is pretty painful. Also it is getting tight and baneful at base, there’s not enough room. I solved this by removing the grey comfort insert to get some additional space at the base but then felt a lot of pain where the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] connects to my body.
So a couple of days ago I decided to cut off the tube of the insert and just use it as padding and it actually works pretty well. So I now I have the padding and the extra space and I think I have a solution that will work for a good while.
I also like to add that I have a gut feeling that edging can be a key component for progress. The last couple of months I haven’t had time for edging and my progress have slowed down a bit. I can’t back it up with any proof or data but I think that edging, really trying to hold a max level erection for at least 30-60 min, after a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] session can do help a lot.
View attachment 32945
View attachment 32946
Getting 7” by end of June feels like a piece of cake now and with some dedication and good fortune I should measure in around 7.1”. ( For reference the BPEL measurement was done 2.5 days after last [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] session and this time without a CR. ) MEG is still at 6.5” but not a priority. I’ve attached a plot over my measure points and It looks like I’ve plateaued a bit but I hope I can keep progressing.
I’ve had a lot of issues with getting good sessions mainly because of my girth and the angle in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] caused by skin at the base. As soon as I get expansion and some fluid retention I get very close to fill my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]. The skin at my base also expands on the underside which angles me inside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] and the head is getting pressed which is pretty painful. Also it is getting tight and baneful at base, there’s not enough room. I solved this by removing the grey comfort insert to get some additional space at the base but then felt a lot of pain where the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] connects to my body.
So a couple of days ago I decided to cut off the tube of the insert and just use it as padding and it actually works pretty well. So I now I have the padding and the extra space and I think I have a solution that will work for a good while.
I also like to add that I have a gut feeling that edging can be a key component for progress. The last couple of months I haven’t had time for edging and my progress have slowed down a bit. I can’t back it up with any proof or data but I think that edging, really trying to hold a max level erection for at least 30-60 min, after a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] session can do help a lot.
View attachment 32945
View attachment 32946
Thank you so much for the update. I understand that you only come with updates monthly but I still worry that men lose their way. So congratulations of the gain, especially when you were not expecting them. Very creative with your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words], you may want to look into n [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] when this method no longer works...that sounds good too hear, right?
doublelongdaddy;732257 said:
Thanks for the congratulations and for the concern - you have a big heart! I usually pop in to read new posts almost every day
I'm gonna try the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] again soon with my modded insert. I also just ordered a pumping sleeve, hoping it will help a bit with the fluid retention.
Cheers for now - hoping to reach 7" by next week
I agree %100 on the edging after, keep up the good work man
bengan;732311 said:Thanks for the congratulations and for the concern - you have a big heart! I usually pop in to read new posts almost every day
I'm gonna try the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] again soon with my modded insert. I also just ordered a pumping sleeve, hoping it will help a bit with the fluid retention.
Cheers for now - hoping to reach 7" by next week
I love when men talk about getting an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words], it makes me all giddy!
The new sleeves I ordered really sucked - too small and too stiff :/ so another failed experiment. Pulled out the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] again but same issue as I had before - my scrotum skin gets pulled in and expands too much which gives me too much angle in the tube and I get pressed against the tube sides. The good news are that [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] without any comfort inserts or sleeves works pretty well. I get a nice expansion and stretch without too much pain. Still hurts my skin alot but I guess I'll have to cope
Life is quite busy right now both at work and the social life and also going for a trip on the weekend. I've had three days off, unplanned, and also decided to take a break until Sunday or Monday. Instead of being unhappy about not being able to have some sessions I'll call it a deconditioning break Since I started in the middle of december I haven't had any breaks longer than 1-2 days. I've been able to have 6 sessions ever single week
Another good news is that I measured yesterday and I'm getting really close to 18 cm BPEL, to the best of my knowledge I'm 17.8-17.9 BPEL right now rofl 7" = 17.78 cm which means I've reached 7", amazing! When I started back in december I didn't even believe in PE and now I reached a length that before only was a pipe dream
MEG is still at 6.5", no progress but not a prio. Feels good to be able to say that I'm 7x6.5, a respectable size hehe
Only down side is that I still feel pretty small compared to my body frame, really need to lose a bit of weight 
Life is quite busy right now both at work and the social life and also going for a trip on the weekend. I've had three days off, unplanned, and also decided to take a break until Sunday or Monday. Instead of being unhappy about not being able to have some sessions I'll call it a deconditioning break
Since I started in the middle of december I haven't had any breaks longer than 1-2 days. I've been able to have 6 sessions ever single week Another good news is that I measured yesterday and I'm getting really close to 18 cm BPEL, to the best of my knowledge I'm 17.8-17.9 BPEL right now rofl 7" = 17.78 cm which means I've reached 7", amazing! When I started back in december I didn't even believe in PE and now I reached a length that before only was a pipe dream
MEG is still at 6.5", no progress but not a prio. Feels good to be able to say that I'm 7x6.5, a respectable size hehe
Only down side is that I still feel pretty small compared to my body frame, really need to lose a bit of weight Back a gain after one and a half weeks, more or less, planned break. I've never had more than two days break since I started with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] in the middle of december so it was a bit exciting to see if I'd lose any gains and I there was some bad news and some good news
Starting with the bad news girth was down 0.1-0.2" i.e. from slightly above 6.5" to just below 6.4". Not too sad about it just a bit surprised, since I usually measure after 24-48 hours a session - that means that temp gains are still present even after two days.
The good news then - length was stable at 7", could'nt see any drop at all which feels great. Also during todays session I managed to stretch almost 0.5" further than my BPEL and I haven't seen that for a couple of months. I really whish that it is a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sign[/words] of a little growth burst and I'm excited to get back to my 5-6 days a week schedule.
Goal for end of the year still at 7.5" BPEL and 6.5" MEG. Dream goal is 8" BPEL and 6.7" MEG
Starting with the bad news girth was down 0.1-0.2" i.e. from slightly above 6.5" to just below 6.4". Not too sad about it just a bit surprised, since I usually measure after 24-48 hours a session - that means that temp gains are still present even after two days.
The good news then - length was stable at 7", could'nt see any drop at all
which feels great. Also during todays session I managed to stretch almost 0.5" further than my BPEL and I haven't seen that for a couple of months. I really whish that it is a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sign[/words] of a little growth burst and I'm excited to get back to my 5-6 days a week schedule.Goal for end of the year still at 7.5" BPEL and 6.5" MEG. Dream goal is 8" BPEL and 6.7" MEG
Last edited:
Big Schwanz Acht
@Big Schwanz Acht
Interestingly, I've been experimenting with 'off-days' and I think my body responds well to 4/5 days on and 2/3 days off. Maybe give that a shot vs. a full week or two.
Just a thought...
Just a thought...