Hey guys,
So due to my own personal reasons, I have decided to give Penis Enlargement a good go in hopes of increasing my size/performance. My gf of 7 years has never really complained but, I have always just wished to be bigger for her and myself and our sexual experiences. I talked to her about it and she fully supported my wishes and I couldn't be happier with that. I did a lot of research before and didn't want to blindly jump in and decided I was really drawn in by DLD's newbie routine with the Bathmate incorporated in. I figured I would share my experiences and see if anyone had any feedback that might help my experience.
Firstly, I guess I should post my beginning measurements. I am not tiny, just below average judging by the numbers but, I definitely wouldn't mind being bigger (who wouldn't!). My long term goals are 8x6 but, I would stop if the gf started complaining (she is a very petite asian and I don't want to hurt her)
FL- 3 7/16"
FSL- 5"
FBG- 4 5/8"
FMSG- 4 3/8"
NBPenis EnlargementL- 4 3/4" (was hard to judge due to low EQ levels when measuring)
BPenis EnlargementL- 5 3/4"
EBG- 4 7/8"
EMSG- 4 3/4"
The routine I decided on was DLD's newbie routine.
Warm up with a hot wash cloth for 5-10 minutes or until I feel plenty loose and ready for some stretches.
Behind the cheeks: Left, right middle 30 seconds x3
Straight down: Left, right, middle 30 sec x3
Straight down rotary cranks: 25 clockwise, 25 counter clockwise, 12 clockwise, 12 counter
Repeat of the straight down and rotary cranks but instead, doing a set straight out and then straight up.
So far stretching is going okay. I am getting a bit of friction on the skin and it is leaving me a little bit irritated. I tried a latex glove and it helped a little but, I still feel like the sides of my penis have indian burn the next day. I think my next effort will be to get some baby powder and try that out. Maybe I am just gripping too hard due to pulling with too much force? I really don't know. Another thought is when I first start my penis gets hard a few times in the middle of stretches and I have to stop and let it rest... then when it comes time for girth, I can't get it up for the life of me haha.
Anyway, for girth I have purchased a Bathmate and love it although, I seem to have a few problems here and there. When I first started pumping, I was getting really solid seals but could only pump to 140-150. Maybe I just wasn't pumping hard enough. Now I am starting at 160, hitting 170s and on the heels of 180. The problem is, sometimes my technique with the pump is funny and I get a solid stream of tiny bubbles coming through the top. I struggled with this for a few sessions. I would pump to a number and by the end of the session (5 minutes) I was 10mm lower then where I started and there was a huge air bubble at the top. I seem to have maybe fixed this by changing my pump angle by leaning back a lot more and forcing all the water out the tip instead of letting some come out the bottom when I enter my penis. It seems to be putting pressure on the inner O-ring in the Bathmate and getting the job done. Just last night i was at about 178 I'd say, my highest number yet.
My actual girth routine is:
Try to get an erection or as erect as possible and pump for 5 mins. At 2:30 into the pump, I give a pump or two and try to maintain/surpass my original pressure. I then exit the Bathmate and do 1 handed jelqs. I found 2 handed jelqs was stretching my skin more than I'd like. So I do 25 jelqs with one hand, then switch to the other hand for 25 and repeat both hands 1 more time. I consider both hands 1 set so 100 total strokes=50 jelqs. I then do 30 V-jelqs while alternating between straight up and side to side. I am not sure how much I care for these... I just don't get the same expansion as a regular jelq. Any thoughts on these? Maybe I should just add more regular jelqs?
Anyway, I do 3 sets of the 5 min pumps/jelqing and am really happy with how that is going. I have had very minimal fluid retention or pain with this method. I am getting a slight pinch of the skin due to the gator. I bought the pump sleeves but haven't really had adequate time to mess around with that. The pain isn't killing me so I figured, if it ain't broke quite yet, don't fix it. My ideology of pumping is every time I pump, I try to pump to a higher number than last. So if my very first pump is 160, I try to get to 165-170 at the half way point. Starting the 2nd session, I try to start at 165-170 and pump to 172-175. Third set is go big or go home. Start at 175ish and really push it to try to hit that 180. The numbers come slowly but with the effort, I will be hitting 200s before I know it.
I am going to pick up a SG extender and slowly work that into my routine during the day time. I will post more when that happens. Other than that, I won't be measuring again or changing much until the 1 month mark. I am really happy to be starting this and can't wait for my results. Thanks all for reading!
So due to my own personal reasons, I have decided to give Penis Enlargement a good go in hopes of increasing my size/performance. My gf of 7 years has never really complained but, I have always just wished to be bigger for her and myself and our sexual experiences. I talked to her about it and she fully supported my wishes and I couldn't be happier with that. I did a lot of research before and didn't want to blindly jump in and decided I was really drawn in by DLD's newbie routine with the Bathmate incorporated in. I figured I would share my experiences and see if anyone had any feedback that might help my experience.
Firstly, I guess I should post my beginning measurements. I am not tiny, just below average judging by the numbers but, I definitely wouldn't mind being bigger (who wouldn't!). My long term goals are 8x6 but, I would stop if the gf started complaining (she is a very petite asian and I don't want to hurt her)
FL- 3 7/16"
FSL- 5"
FBG- 4 5/8"
FMSG- 4 3/8"
NBPenis EnlargementL- 4 3/4" (was hard to judge due to low EQ levels when measuring)
BPenis EnlargementL- 5 3/4"
EBG- 4 7/8"
EMSG- 4 3/4"
The routine I decided on was DLD's newbie routine.
Warm up with a hot wash cloth for 5-10 minutes or until I feel plenty loose and ready for some stretches.
Behind the cheeks: Left, right middle 30 seconds x3
Straight down: Left, right, middle 30 sec x3
Straight down rotary cranks: 25 clockwise, 25 counter clockwise, 12 clockwise, 12 counter
Repeat of the straight down and rotary cranks but instead, doing a set straight out and then straight up.
So far stretching is going okay. I am getting a bit of friction on the skin and it is leaving me a little bit irritated. I tried a latex glove and it helped a little but, I still feel like the sides of my penis have indian burn the next day. I think my next effort will be to get some baby powder and try that out. Maybe I am just gripping too hard due to pulling with too much force? I really don't know. Another thought is when I first start my penis gets hard a few times in the middle of stretches and I have to stop and let it rest... then when it comes time for girth, I can't get it up for the life of me haha.
Anyway, for girth I have purchased a Bathmate and love it although, I seem to have a few problems here and there. When I first started pumping, I was getting really solid seals but could only pump to 140-150. Maybe I just wasn't pumping hard enough. Now I am starting at 160, hitting 170s and on the heels of 180. The problem is, sometimes my technique with the pump is funny and I get a solid stream of tiny bubbles coming through the top. I struggled with this for a few sessions. I would pump to a number and by the end of the session (5 minutes) I was 10mm lower then where I started and there was a huge air bubble at the top. I seem to have maybe fixed this by changing my pump angle by leaning back a lot more and forcing all the water out the tip instead of letting some come out the bottom when I enter my penis. It seems to be putting pressure on the inner O-ring in the Bathmate and getting the job done. Just last night i was at about 178 I'd say, my highest number yet.
My actual girth routine is:
Try to get an erection or as erect as possible and pump for 5 mins. At 2:30 into the pump, I give a pump or two and try to maintain/surpass my original pressure. I then exit the Bathmate and do 1 handed jelqs. I found 2 handed jelqs was stretching my skin more than I'd like. So I do 25 jelqs with one hand, then switch to the other hand for 25 and repeat both hands 1 more time. I consider both hands 1 set so 100 total strokes=50 jelqs. I then do 30 V-jelqs while alternating between straight up and side to side. I am not sure how much I care for these... I just don't get the same expansion as a regular jelq. Any thoughts on these? Maybe I should just add more regular jelqs?
Anyway, I do 3 sets of the 5 min pumps/jelqing and am really happy with how that is going. I have had very minimal fluid retention or pain with this method. I am getting a slight pinch of the skin due to the gator. I bought the pump sleeves but haven't really had adequate time to mess around with that. The pain isn't killing me so I figured, if it ain't broke quite yet, don't fix it. My ideology of pumping is every time I pump, I try to pump to a higher number than last. So if my very first pump is 160, I try to get to 165-170 at the half way point. Starting the 2nd session, I try to start at 165-170 and pump to 172-175. Third set is go big or go home. Start at 175ish and really push it to try to hit that 180. The numbers come slowly but with the effort, I will be hitting 200s before I know it.
I am going to pick up a SG extender and slowly work that into my routine during the day time. I will post more when that happens. Other than that, I won't be measuring again or changing much until the 1 month mark. I am really happy to be starting this and can't wait for my results. Thanks all for reading!
Last edited:
