Male Edge Device

Hi,

I started using this about 9 days ago, so I just finished up week #1.
Anyway, thought people might want some info on this device as well. Looks about the same as the SG device to me, except it's all plastic, no metal except on the bearing (hinge). Anyway, I've heard these can break, so I'm being real careful-but it is starting to sound a bit easier than the one with all the metal pieces that can pinch your skin. It's very easy for me to change the length on it-which is nice as the pressure will go down after 20 minutes and if I wish to stay at 1200g say, then I need to move it up a notch and I'm good to go for another 30 minutes at that tension.

For week 1 I'm supposed to do between 800 and 1200g, I'm running around 1200 for 2 hours each day for the 3rd day now (week 2). Thanks to DLD fixing my wrap method, I think it's rolling pretty smooth now.

I was following J1's blog about using the extender (SizeGenetics - Penis Traction Extender I think) and enjoyed it, very helpful. I kept noticing him talking about better EQ... and gotta say it's true. I've woken up with erections that would match that of a 14 year old... I mean rock hard, insanely hard which is pretty cool. Yesterday it was even standing straight up as I was sitting there on a couch and my wife was really impressed and fascinated.

Also-I can already tell there are some girth gains here. I'm not measuring yet, but I can just tell-it's bigger. Had sex and got a bit of a reaction from her as well. Although... she still doesn't suspect anything is strange (yet)... my goal is for her to say "Okay, what the fuck is going on, who are you and where did you get that dick?" Before I tell her. Which also means I gotta wear the thing during the day or late at night.

I still question if you can wear this with even loose fitting pants... it's fine if I'm standing there, but the second I take a step, you can see my dick... so not really a device for professionals lol. Now for me, I know I don't want this to be an ongoing part of my life-so I hope it's true that the gains are permanent. So once I hit my goals, I'd like to pretty much just stop-and I hope it doesn't start shrinking back to my average, boring size.

My Starting Measurements:

NBPFL: 3.9"
NBPenis EnlargementL 6.2"
MSEG: 5.3"

Also-I'm not trying to pimp this one-I happened to find this one before I even knew about MoS, and while the materials are inferior to the SG (metal vs plastic) and the SG has a fancier case (it's wood isn't it?) I'm betting this is much easier to adjust-no screwing, it's 3 parts total (4 if you include your wrap). I'm excited to see how the gains look (thanks to this site, I'm pretty convinced that traction works at this point).

Keep us posted

Im about mid-way through week 3 (3 hours per day at traction around 1,200g) and still enjoying it-but it definitely means I have to be alone during this time. In the video they show how you can wear it under pants-utter nonsense... I'd say you could wear it under a trench coat lol. When the traction is on, it has me about 7" (NBPL) .... so how the hell do you hide that?? And I've tried to aim it up, and cinch it down under my belt-this works a little better, less obvious... but you can't sit down lol. You can't have a bar from your bellybutton down and sit or bend much... So with all this in mind-gotta say I kinda fear when I hit the 5hr, 6hr period which is in about 2 weeks. And then I gotta wear it for 20 weeks!! That's 5 months for god's sake. Well, I plan to do it, but wow-what a commitment. So I hope the gains are permanent as that would be a huge waste of time otherwise. Nothing good is easy I guess.
Personally, I am not jelqing or using Bathmate or anything else (no hanging, clamping, nothing). I just want to see what this device does by itself. Assuming everything is groovy, ya I'd like to get a little sillier with the girth. If the science/claims are true, I should be about 6.4" EG when I'm done with this (that's an increase of about an inch), I think it would be pretty sweet to be closer to 7" around so I plan to take up the Bathmate and other DLD insanity at that point-but hope to be done with all the penis stretching.

Broke my first strap yesterday, I have 3 left but imagine there is velcro in my future. Gotta say tho-this is very easy to use. I can change the tension in 2 seconds, just sliding the bar forward one notch (I think there are 7 or 8 notches and it can be moved with the head piece to extend further as well). Everything seems like good quality to me, the plastic is very tough. The straps are the only weak feature I see in this product-but it's still early yet, so maybe I'm wrong. We'll see how it goes.

Also, I thought I would add-as long as I wrap right, and put this thing on right (put the strap in the right place), it's very comfortable. I could easily wear this for 3 hours with no issues other than if I have to pee. Like I said, the real issue is that it cannot really be hidden. Right now, at 1200g, it stretches me to about 7.25".... you can't hide that, so I call bullshit flag on "you can wear this under loose clothing yadda yadda". Maybe I can post a video of this thing to show how it works.

Thank you for the feedback, keep it coming.

Been slacking a little bit in week 4 - very busy at work so I found it very hard to hit 4 hours each day. Then when I went home at night... I was just too damn tired to put it on, etc.
I've tinkered with wearing it under clothes. I have found that if I wear it straight up (dick pointed at belly button) and then kind of poof my shirt out a bit-it's pretty hidden. But I also have trouble sitting down (body at a right angle) if I do this... and my job can require some pretty active things like jumping down and crawling at times and so forth-so not sure how I can do it in public but hoping to find better solutions.
So today is the beginning of week 5 and yesterday I skipped completely so I'm hoping a rest day like that doesn't hurt me too much.

Currently, I'm stretching it at about 1800g and hopefully can find the time today to so for 5 hours! Stretching it like that brings it out to about 7.5". Which means about 1.2" stretch past my usual NPBEL. Nobody ever really answered my questions about that-but it seems to be about right since the tension is correct via the manual and so forth. I can definitely feel it the entire time, but not in a bad way-more like a work out.

Anyway, so far it's holding together fine. I do think if someone was pretty careless they might break this device... but I don't expect to have any problems except with straps breaking. And I've still been too lazy to get the velcro and figure it out-but I'm sure it's not far off. I've broken 2 straps so far, and have 2 left. So it seems perhaps each strap lasts 2 weeks. But in both cases I do think I could have been more careful with the straps and I'm sure some of that issue is me, not just the straps.

So I'm halfway there to my first measurement... I do measure while in the device as I like to see consistently how long it is stretching it. And it is fun to measure! But I haven't done a true measurement yet (without the device) but I do hope I can stick to the program and do an accurate assessment in 4 weeks.

Crazy Doc;422013 said:

So I'm halfway there to my first measurement... I do measure while in the device as I like to see consistently how long it is stretching it. And it is fun to measure! But I haven't done a true measurement yet (without the device) but I do hope I can stick to the program and do an accurate assessment in 4 weeks.

Click to expand...

So have you gained when you measure this way?

doublelongdaddy;422021 said:

So have you gained when you measure this way?

Click to expand...

I would say yes. Hard to say as I don't measure it stretched outside the device. I am also cautious-not pushing my limits. But at the beginning, I was stretching to maybe 6.5", now I'm hitting an inch higher (been increasing steadily) with the same comfort level, so it appears so.

Crazy Doc;422075 said:

I would say yes. Hard to say as I don't measure it stretched outside the device. I am also cautious-not pushing my limits. But at the beginning, I was stretching to maybe 6.5", now I'm hitting an inch higher (been increasing steadily) with the same comfort level, so it appears so.

Click to expand...

Excellent! I am really looking forward to your measurements!

Just thought I'd post a picture of this extender in action so maybe people can see how it works a bit better. This is at 2,000g (shown by the location of the red bars at the base). The device has 2 outer rods that slide and lock into place easily in 6 different holes on the main bars (those connected to base). So these rods alone can stretch you to about 8" I'd say. To push it further, you can take the head piece-which attaches to the head, has noose, etc, and it snaps onto the outer bars in the same way-locking into place. It can be pushed forward or pulled back if you pop it out of the locking holes. Total, I believe this unit works for 2" to 11", without adding any new pieces.

Very easy to adjust the headpiece, nothing has to be taken off or anything. To shorten the "outer bars", you would have to take the head piece off briefly, rotate the bars to unlock them and pull them back.

So as I said, this is 2,000g. The head piece is on the 2nd hole in (giving me more play with the outer bars) and the outer bars were at the 5th hole. This means I could have pushed it forward one more notch with the outer bars, and I could have moved it 4 more notches forward on the headpiece-so you can see this thing might even handle DLD lol.

However, to ADD tension, you don't take anything off, you just slide the outer bars forward one more notch. Anyway, pretty slick device.

Crazy Doc;422317 said:

Just thought I'd post a picture of this extender in action so maybe people can see how it works a bit better. This is at 2,000g (shown by the location of the red bars at the base). The device has 2 outer rods that slide and lock into place easily in 6 different holes on the main bars (those connected to base). So these rods alone can stretch you to about 8" I'd say. To push it further, you can take the head piece-which attaches to the head, has noose, etc, and it snaps onto the outer bars in the same way-locking into place. It can be pushed forward or pulled back if you pop it out of the locking holes. Total, I believe this unit works for 2" to 11", without adding any new pieces.

Very easy to adjust the headpiece, nothing has to be taken off or anything. To shorten the "outer bars", you would have to take the head piece off briefly, rotate the bars to unlock them and pull them back.

So as I said, this is 2,000g. The head piece is on the 2nd hole in (giving me more play with the outer bars) and the outer bars were at the 5th hole. This means I could have pushed it forward one more notch with the outer bars, and I could have moved it 4 more notches forward on the headpiece-so you can see this thing might even handle DLD lol.

However, to ADD tension, you don't take anything off, you just slide the outer bars forward one more notch. Anyway, pretty slick device.

Click to expand...

I can't believe you are able to use this! I tried to use it and the first time putting on the plastic snapped. No matter what I did the plastic kept breaking more and more until it would not extend. Needless to say I smashed it to bits

I've got one of these as well Crazy Doc but never really got into it cos i found it was a nightmare to put on right! Have you got any pointers?

homeslice;422362 said:

I've got one of these as well Crazy Doc but never really got into it cos i found it was a nightmare to put on right! Have you got any pointers?

Click to expand...

I don't have any problems putting it on, what gave you trouble? Maybe I can help.

doublelongdaddy;422334 said:

I can't believe you are able to use this! I tried to use it and the first time putting on the plastic snapped. No matter what I did the plastic kept breaking more and more until it would not extend. Needless to say I smashed it to bits

Click to expand...

Where did it snap DLD? I wanna know where it's fragile so I don't repeat your mistake.

K, well first in answer to homeslice, let me tell you how I do it:
I wrap with maybe 2 feet of gauz or however you spell it, right behind the head.
I then put the base piece on (the part that has the ring that goes around the base of the penis).
Then I position the strap maybe 1/2" behind the head. And I pull the loops through the head piece holes. I cinch each side down to the 2nd notch.
Then I kind of pull on the skin around the base to avoid wrinkles etc. I also pull loose skin into the ring from the base (I'm trying to stretch tissue, not skin so I want to keep loose skin inside
the device base eh)
Then I cinch down the head piece further, 1-2 notches at a time and stop at 5 notches on each side.
Then I pull the outer bars back (the 2 pieces that slide onto the base arms) against the spring and click the head piece onto the 2nd notch so there is about and inch of the head piece
overlapping past the outer bars.
now that the head piece is on, I use my thumb to push the outer bars forward until I get to 2000g, one click at a time on each side so they stay close to even as I increase the tension.
Then I check it occasionally and if the tension has dropped, I'll notch it forward again until I hit 2000g again.
I check on the head occasionally and sometimes I do loosen the strap to 4 notches per side at some point.

Also-I am testing out wearing this thing under clothing now. I picked up some loose pants (36" waist, I'm normally a 32" I think, maybe 33") and they are baggy jeans.
It appears to be 100% better. You can still see it a little like as I walk, but looks more like a wrinkle-certainly not obviously a boner or something (which is what the extender makes it look like). So I'm going to run around today with my dick stretched to 7" down my leg and see how it goes lol.

Crazy Doc;422364 said:

Where did it snap DLD? I wanna know where it's fragile so I don't repeat your mistake.

Click to expand...

The base rods, where they have the bumps to set tension. Both became stripped and broke after my first try using it. I was soooooo upset at the time because FastSize was changing over to this model, eliminating their much better quality unit in favor of this. This is when I cancelled FastSize and got SizeGenetics on board.

Well, I'll be careful. So far I do like how this is engineered, very easy to use. The only gripe I have is the straps-which due to their elasticity probably can't really be improved.... but frankly they should give you a dozen of these if you're paying $175 or $200 when it's obvious they will snap.

Also I have 2 new mods I may suggest here:

1/ Wearing this with pants for about an hour-I did notice big discomfort at the bottom of the base due to the angle. The bottom of the base was really digging into my scrotum. I have decided to wrap the base ring also so there is some pad between the ring and my scrotum-so far it's much more comfortable and I'm betting this is a good mod for any extender worn in any way now, simply due to increased comfort.

2/ I notice that if my dick is down, if it's on the inside of my thigh, it's really hard to notice, even when I walk. I really want to follow the 6 hour routine here, so I'm trying to figure out how to make this work. I'm thinking maybe a head band or a garter band, something like that to hold the dick to my leg and on the inside of my thigh. It's comfortable so the only issue is now how to restrict the movement. I'm going to try a headband or something to hold it in place and see how that works and report back. I don't think this would work with tight pants, but I'm thinking-headband holding the dick down + baggy pants = One can wear this thing in nearly any situation without being seen. I'll try it out and report back. But down seems to be the way to go-if the dick is up, it's a bulge no matter what you do unless you wear a trench coat or long jacket-so I don't like that. And, the stretch is better when it's down anyway, so it seems like the engineering should be focused on how to wear it down.

On mod #2-I just picked up velcro tape or 2 sided velcro and just used that. So I just cut a strip about 8" longer than the circumference of my thigh. Then pulled the velcro through the area between my dick and the inner pole/tube of the extender. Then wrapped it tight to my leg such that it is pointing straight down on the inside of my thigh. Not sure if it will be comfortable at full stretch yet, but it definitely holds securely and is now almost invisible in these baggy pants.

So I'm excited and very optimistic that 6 hours a day can definitely be done by the professional or person who deals with people all day long. When I got out of my car, the head piece came loose off the tubes and so I just used their bathroom and readjusted it and was more careful getting out of the car-kinda got to slide your butt half out like an old man to avoid it popping off lol. Anyway, I'll update on this at the end of the day and a few hours of wear and report how it worked and so forth. I plan to redo the strap with this velcro tape tonight-so far it looks like the way to go. But hopefully this new mod I'm adding helps people too and I highly recommend they wrap the base piece if they're going to wear it this way - the hard plastic is just too uncomfortable if the penis is pointing straight down. But lets see if these 2 mods together will work for the purpose of clothing and avoiding embarrassing bulges to the public.

Speaking of which..... why is it so taboo that our cocks show a bit through clothing? Nipples are pretty acceptable-women can get away with showing the size of their boobs, with nipples being slightly taboo-but it seems like your cock showing or god forbid your cockhead being visible is completely taboo-doesn't it? Personally, if I had an extra helping of meat, it would be nice to be able to show it off all the time without society getting offended.

Haha!! Sliding out of the car doing the "extender-slide" lol. One time after doing three jelq sessions in a day, I had some extra bulge while flacid and got some more curious looks from some women in the mall.

If the dong is stong, there ain't nothin' wrong!

So I was trying the velcro mod on the head piece, to replace the strap based on J1L's model and schematics. Can't say I'm liking it. If you cinch it down that way, it tends to twist the cock head since only one side is pulling down (with the strap, both sides are pulled down evenly; equally). And I wonder how this might affect the growth! Course, maybe you could get a cork screw penis like ducks have:
<iframe src="http://player.vimeo.com/video/8342932" width="400" height="320" frameborder="0"></iframe><p><a href="http://vimeo.com/8342932">Eversion in air: from blogs.discovermagazine.com/loom</a> from <a href="http://vimeo.com/user447015">Carl Zimmer</a> on <a href="http://vimeo.com">Vimeo</a>.</p>

That's messed up isn't it????? lol gotta love the duck penis-and the duck vagina is similar-a big maze, with lots of dead ends. Bet it makes sex more interesting though, "Hydromaxm what if I go over here? oooo that's nice, but maybe if I go into this passage this time... ohhh ya that's even better....etc." Sorry, but the duck sex is completely freaking nuts.

Back to the velcro... So not just the twisting, but I've found it doesn't hold near as good as the strap-the head really starts pulling through it. So at this point, I went back to the strap. But the velcro leg mod I came up with works great and now I have no trouble doing 5 hours or 6 hours per day even though I run a business and deal with people all day. However, I'm wondering here about growth affects too-I'm thinking maybe after 2.5-3 hours, I should switch the velcro strap to the other leg, so the directional stretch is even both directions (left and right). Anyway, give me some comments about the duck penis lol.