I Hated The SG Until I Went Back To Basics :) (pic attached)

lexyz222 · Dec 7, 2012

So basically i have had the SG for around a month now, and i was getting slightly disheartened with my technique, i tried the SG with the standard set-up, with a noose wrapped round some padding, even the velcro mod, but i set it up like this after seeing a thread earlier in Picture Proof, and omg... its the most comfortable way i have ever worn the SizeGenetics, and going by the manual, this is how its meant to be worn if i'm correct? But alot of people recommend the other methods, velcro etc...

Anyway, if people are having trouble with slippage, do it this way... just dont tie the noose too tightly.

Pros of this method:

- No Slippage due to being "hooked" round the glans
- Better extension when "pulling" yourself onto the rods.
- For me personally, i experience NO discoloration after even 2 hours, but with other methods that force me to wrap tighter with the noose, my glans / skin goes purple even after 30 mins.

I'm happy again

Time to make some gains

View attachment 26450

lexyz222 · Dec 8, 2012

hepcat;521295 said:
I don't see anything going around just below your head.

Im wearing the noose, and you cant see it fully because its inbetween my foreskin and the base of my exposed glans. I thought it would hurt but its even comfier than previous methods ive tried

Jdcsd · Dec 8, 2012

That look weird do you shove your balls through the hole? It look like your skin is pinched up like the bottom piece is under your balls

Jdcsd · Dec 8, 2012

Also just looked again you have absolutely no tension there at all. Also you have the adjustment so far out that you can see the screw threads. That thing is on all kinds of wrong and there is zero tension being placed on your dick. No way you will gain anything like that.

rebel2011 · Dec 8, 2012

And the screws are only half out....the bottom half screws also. You need to tighten the rods back to the thumb screw and probably add a bar.

Jdcsd · Dec 8, 2012

Yah at least a medium bar maybe even a long bar. Hard to say since it's on wrong so that could change but for sure more bars

lexyz222 · Dec 8, 2012

Jdcsd;521377 said:
Also just looked again you have absolutely no tension there at all. Also you have the adjustment so far out that you can see the screw threads. That thing is on all kinds of wrong and there is zero tension being placed on your dick. No way you will gain anything like that.

Not sure what you mean, i have the bars screwed out to the max, any further and it will collapse on itself.

As for the tension, i felt alot of tension when i had it on like that, so :S not sure what you mean by all kinds of wrong.

Pic attached to illustrate what i mean:View attachment 26451

neognostic · Dec 8, 2012

I think because of the angle it makes it a bit hard to know what's going on. If you're unscrewed all the way out then you might be better off just adding a quarter inch bar instead.

If you're having trouble getting bars on (don't know that you are) then consider "sneaking" them in by adding them once already extended.

DLD · Dec 8, 2012

neognostic;521385 said:
If you're having trouble getting bars on (don't know that you are) then consider "sneaking" them in by adding them once already extended.

That is the first time I heard someone describe it as "sneak in" but that is the perfect phrase and a great method to sneak faster gains

Jdcsd · Dec 8, 2012

See those 3 notches just below where the first bar starts. Those indicate how much tension you have. Being that you can see all 3 you have zero tension. If it is compressed all the way down so that you see no notches then you are at max tension. No only do you have zero tension but you have zero tension with all of the adjustments maxed out beyond where they should ever go being that you see the screw threads. When mine is on you see zero notches and no adjustment used at all. As my dick stretches during my session I then use the adjustments to keep tension at max. After time it will stretch out so that you see he second notch. I then crank the adjustment down so that it's at max tension. You must just be pricing your dick in there without compressing the spring down at all when you put it on

lexyz222 · Dec 8, 2012

Jdcsd;521444 said:
See those 3 notches just below where the first bar starts. Those indicate how much tension you have. Being that you can see all 3 you have zero tension. If it is compressed all the way down so that you see no notches then you are at max tension. No only do you have zero tension but you have zero tension with all of the adjustments maxed out beyond where they should ever go being that you see the screw threads. When mine is on you see zero notches and no adjustment used at all. As my dick stretches during my session I then use the adjustments to keep tension at max. After time it will stretch out so that you see he second notch. I then crank the adjustment down so that it's at max tension. You must just be pricing your dick in there without compressing the spring down at all when you put it on

Ok thanks for the info.

But nope, i compress the bars down and they are screwed right down to the base before i put on the SG.

Also my logic is surely the more you twist the bars the more tension you are receiving? If i have to twist it down to the bottom then i need to order more bars ASAP, because when the bars are fully down i can get the SG on comfortably, but after 5-10-15 mins i gradually screw the bars upwards until i'm right by the part where it disconnects.

Question: Surely if you are on the first notch you barely have any tension, because to get to the first notch you essentially need to compress the device anyway. Surely being at the third (highest) notch would provide the most tension?

Maybe im being a noob here but im glad to hear the advice.

Jdcsd · Dec 8, 2012

You have it on with no tension trust me. I don't have time now but tomorrow I'll take a pic and show you how it should look. I don't want you to waste your time and you clearly have no idea what you are talking about with regards to tension. If it was compressed there wouldnt be all 3 notches there. Max tension it at the first notch closest to your body. Each of he next 2 notches farther from your body are less tension. Like I said I'll take a pic and show you what it should look like. It's pointless to wear it like you are and I don't want you to waste your time. I gained an inch in 6 months using only size genetics, no other pe at all.

Jdcsd · Dec 8, 2012

And I only wore it 3 hours a day

Jdcsd · Dec 8, 2012

Oh and one more thing so I can possible help you before tomorrow, what is your bpel? I'm 7imches and I add 2 long bars to each side o the base bar. It looks like you have only 1 long bar added to each side and you look around my size

lexyz222 · Dec 8, 2012

Jdcsd;521448 said:
You have it on with no tension trust me. I don't have time now but tomorrow I'll take a pic and show you how it should look. I don't want you to waste your time and you clearly have no idea what you are talking about with regards to tension. If it was compressed there wouldnt be all 3 notches there. Max tension it at the first notch closest to your body. Each of he next 2 notches farther from your body are less tension. Like I said I'll take a pic and show you what it should look like. It's pointless to wear it like you are and I don't want you to waste your time. I gained an inch in 6 months using only size genetics, no other pe at all.

Hey man,

I appreciate it thanks dude, i'm still learning so looking to soak in as much information as possible

Me being a noob is all part of the process and its guys like you that make this site so awesome, so thanks again!

I have one long bar and one small bar either side ontop of the base bars. My BPenis EnlargementL is 7.1 inches

Im ordering some more bars tommorow.

Jdcsd · Dec 9, 2012

Yah man this is the main problem you are having. You are about the same length as me but you have way less bars on than you should. You have to stretch past bpel to make gains. I get to about 8 inches when I'm in size genetics even though I'm only 7 bpel. Just think of this when sg is in your hand just there look at it. You will see those 3 notches just below he attached bar. Now push the sg together like an acordian. If you then put you dick in it with the sg at its shortest length It will pull it away from your body as hard as possible until it gets back till it fully extended state again showing all 3 notches. This is why when you tighten it less bars show. At your size at the very least you need one long bar one medium bar and the small bar on each side. This is what I use as a light stretch. I put on 2 long bars on each side and adjust out to close to max on the adjustments for my max tension stretch. The thing is you dont have enough bars on so think about it this way. If you put on no bars and screwed out the adjustments to the max would you have max tension? No. So yes you have the adjustments all the way out put the point is you should never be there. Once the adjustment is maxed out on MAX tension then you add more bars. You are maxed out on the adjustment at minimum tension which means you need way more bars.

Jdcsd · Dec 9, 2012

View attachment 26452

lexyz222 · Dec 9, 2012

Jdcsd;521509 said:
Yah man this is the main problem you are having. You are about the same length as me but you have way less bars on than you should. You have to stretch past bpel to make gains. I get to about 8 inches when I'm in size genetics even though I'm only 7 bpel. Just think of this when sg is in your hand just there look at it. You will see those 3 notches just below he attached bar. Now push the sg together like an acordian. If you then put you dick in it with the sg at its shortest length It will pull it away from your body as hard as possible until it gets back till it fully extended state again showing all 3 notches. This is why when you tighten it less bars show. At your size at the very least you need one long bar one medium bar and the small bar on each side. This is what I use as a light stretch. I put on 2 long bars on each side and adjust out to close to max on the adjustments for my max tension stretch. The thing is you dont have enough bars on so think about it this way. If you put on no bars and screwed out the adjustments to the max would you have max tension? No. So yes you have the adjustments all the way out put the point is you should never be there. Once the adjustment is maxed out on MAX tension then you add more bars. You are maxed out on the adjustment at minimum tension which means you need way more bars.

Ok i think im getting it now. So if you have everything screwed down right to the bottom, but you add more bars, then when you put the device on, you'll only be at the first notch of tension?

Here's a pic to illustrate where i'm currently at, as soon as i put on the device with my current bars, it shoots up to 2.5 notches of tension almost immediately, in your picture you have it safely on the first notch and it doesnt look like its going anywhere anytime soon haha, but with me, unless i compress the device with my hands, by standard it goes to 2.5 notches of tension.

So if i add more bars the tension level will stay at 1 notch?

neognostic · Dec 9, 2012

doublelongdaddy;521387 said:
That is the first time I heard someone describe it as "sneak in" but that is the perfect phrase and a great method to sneak faster gains

All praise has to go to Bigjobdude on this one. The phrase is his and he's where I learned the method. Helped me a LOT in using the SG.

neognostic · Dec 9, 2012

lexyz222;521538 said:
Ok i think im getting it now. So if you have everything screwed down right to the bottom, but you add more bars, then when you put the device on, you'll only be at the first notch of tension?

Here's a pic to illustrate where i'm currently at, as soon as i put on the device with my current bars, it shoots up to 2.5 notches of tension almost immediately, in your picture you have it safely on the first notch and it doesnt look like its going anywhere anytime soon haha, but with me, unless i compress the device with my hands, by standard it goes to 2.5 notches of tension.

So if i add more bars the tension level will stay at 1 notch?

It looks like you have one long bar and maybe/maybe a medium bar on each side? That right? I'm still fascinated that you're wearing the noose without the comfort pad or anything else.

It looks to me like you could probably add a medium bar on each side if you don't already have one. If you have then consider going up to both long bars for a bit each set. If you're just wearing the one long bar on each side now then definitely add the medium bar.

I Hated The SG Until I Went Back To Basics :) (pic attached)

0

Attachments

0

1

1

0

1

0

Attachments

0

doublelongdaddy

1

0

1

1

1

0

1

1

Attachments

0

0

0

Similar threads