Using Max Vac Extender as ADS Strapped Setup

stillwantmore

stillwantmore

Well-known member
I started this a few days ago and posted:

This is first day of "Proof Of Concept" testing. The elastic band in the picture is a latex "slingshot replacement band" which I found in the sporting goods area of Wal Mart.

I'm wearing a sock around my foot for comfort. The dog collar (an adjustable from 8"-14" nylon with quick release snap $6 also from Wal Mart) "bites" into the leg, or foot with the pull of the band. Placement does not matter...but the sock remedies the discomfort issue.

I took some nylon "para cord" that I had around my house and made knots in it, and then placed the knots in the channels that the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] rods sit into. (see pics)

Rubber band around chamber/sleeve keeps any vac leaks to a minimum.

The two metal clips on either end of the elastic band are "carabeeners". Small, approximately 2" also found in sporting goods at Wal Mart.

Please do not rush out and buy the parts! I'm testing this for a couple weeks to see if there are issues that I do not like, or think would cause problems.

Do not send me messages asking me to make you this. If this concept makes it through testing, you will be buying your own [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] chamber, and sleeves from BTC. I assume he will sell the parts aside from a complete [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. Surely he has replacement/warranty parts...and profit, is profit.

I do not benefit in any way if you make your own setup as pictured. I just hope this does prove effective. Like said above, I'm going on an hour ...well over an hour now of straight wear time with no issues yet. I'll continue testing, and provide updates asap.
 
I've been averaging 3-4 hours total wear time just the last week. 4 hours total yesterday and today. I'm a looking at adding another hour daily in the next few days and see myself easily wearing this setup all day within a couple months with potty breaks the exception of course. See the pics:
 
7.5 hours down today with NO problems! I'm calling it a day, but it's been great! Again, I'm getting soreness similar to when I was hanging, but without the hassles normally associated with hanging such as multiple sets. Being able to get a constant 2lb+ pull for HOURS at a time with no discomfort, or loss of blood flow....you just can't beat it!
 
I was impressed with my flaccid size after today. I know it's just a flaccid shot, and no indicator of gains to come...but the fatigue I'm getting IS.
 
Do you use a wrap in the chamber at all?

Does your tip get what I like to call "vachang dick", where the tip gets sorta stretched open from the vacuum?
 
kushextender;294185 said:
Do you use a wrap in the chamber at all?

Does your tip get what I like to call "vachang dick", where the tip gets sorta stretched open from the vacuum?
Click to expand...

No on both.
 
stillwantmore2;294066 said:
I started this a few days ago and posted:

This is first day of "Proof Of Concept" testing. The elastic band in the picture is a latex "slingshot replacement band" which I found in the sporting goods area of Wal Mart.

I'm wearing a sock around my foot for comfort. The dog collar (an adjustable from 8"-14" nylon with quick release snap $6 also from Wal Mart) "bites" into the leg, or foot with the pull of the band. Placement does not matter...but the sock remedies the discomfort issue.

I took some nylon "para cord" that I had around my house and made knots in it, and then placed the knots in the channels that the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] rods sit into. (see pics)

Rubber band around chamber/sleeve keeps any vac leaks to a minimum.

The two metal clips on either end of the elastic band are "carabeeners". Small, approximately 2" also found in sporting goods at Wal Mart.

Please do not rush out and buy the parts! I'm testing this for a couple weeks to see if there are issues that I do not like, or think would cause problems.

Do not send me messages asking me to make you this. If this concept makes it through testing, you will be buying your own [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] chamber, and sleeves from BTC. I assume he will sell the parts aside from a complete [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. Surely he has replacement/warranty parts...and profit, is profit.

I do not benefit in any way if you make your own setup as pictured. I just hope this does prove effective. Like said above, I'm going on an hour ...well over an hour now of straight wear time with no issues yet. I'll continue testing, and provide updates asap.
Click to expand...
 
All you need to do now is take some kick boxing classes with that thing on and you're good to gorofl

That's amazing man...
 
Not to be overly optimistic, but it appears that I am already making some length gains. My bp flaccid stretch length is up 1/8". Not much, but it's a positive increase!
 
I'm still very pleased with this setup. Still logging several hours daily in wear time. Again, man it's fun to repeat...I'm wearing this for HOURS at a time...not minutes. Bitchin!
 
DGreekStallion;296787 said:
Anyone know where to get the Max Vac?

I can not find this thing for the life of me.
Click to expand...

Direct link removed. Sellers are not trust worthy anymore.
 
Last edited:
I was thinking of getting that thing, though I'm a beginner, would you recommend?

and keep us updated with how it goes.

Thanks
 
khathas;296914 said:
I was thinking of getting that thing, though I'm a beginner, would you recommend?

and keep us updated with how it goes.

Thanks
Click to expand...

Anyone can use this setup really. You just start off with less wear time daily...say 30 minutes a day for a week, and slowly add more time.
 
Hummm, the one at the link you posted looks entirely different than the one you have in your pics above. Is yours a different version than the MVII posted at the site?
 
Last edited by a moderator:
MackIII;296960 said:
Hummm, the one at the link you posted looks entirely different than the one you have in your pics above. Is yours a different version than the MVII posted at the site?
Click to expand...

I'm using the head piece off the MV [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words]...which is sold only through the mynewsize forum. I have come to prefer using the regular MV hanger chambers though for the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] setup due to their round outer shape. I was simply testing the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] chamber with this setup when I originally started testing it out again.
 
Hmm, I don't understand the idea of it being a pump and an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]/hanger at the same time. wouldn't the pumping result in expanding of the end of the penis only since the lower part of it doesn't go in the tube?

in another way, won't you end up having a thinner base and fatter end using the pump?
 
Just wanted to say thanks for the inspiration. Because of you I'm back into the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] and making my setup better. At the moment I'm able to wear my setup for 12+ hours and hoping for some gains from this. Keep up the good work :D
 
RoninTT;297474 said:
Just wanted to say thanks for the inspiration. Because of you I'm back into the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] and making my setup better. At the moment I'm able to wear my setup for 12+ hours and hoping for some gains from this. Keep up the good work :D
Click to expand...

What device are you using?
 
khathas;297090 said:
Hmm, I don't understand the idea of it being a pump and an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]/hanger at the same time. wouldn't the pumping result in expanding of the end of the penis only since the lower part of it doesn't go in the tube?

in another way, won't you end up having a thinner base and fatter end using the pump?
Click to expand...

Simply put, this device is indeed like a very short pump tube. Smaller in diameter than most as well. Only my glans, and the first inch or so of the penis behind my glans gets any kind of "pump". Because pumping uses vacuum, the expansion is only temporary. It's no where near as dramatic as if I were actually pumping, nor is there the fluid buildup you'd normally see from regular pumping...mainly due to the sleeve, and the smaller inner diameter. The vacuum used in this device is basically to attach the chamber to the penis for stretching. The vacuum is the "grip" that would normally come from other devices in the form of a crushing, compression force that normally cuts off blood flow. In this application (vacuum) there's no such thing going on. It's not a girth device, rather for lengthening.

So answering the two last questions you asked, NO.
 
Last edited:
stillwantmore2;297497 said:
What device are you using?
Click to expand...

I'm using a head from the autoextender, with a retracable keychain and a velcrostrap just under my knee. Going to put some pictures in my thread soon
 
RoninTT;297530 said:
I'm using a head from the autoextender, with a retracable keychain and a velcrostrap just under my knee. Going to put some pictures in my thread soon
Click to expand...

One of the retractable keychains that you see people using in hospitals for example?? That can't be providing more than a pound if that of resistance? You should move up to a latex band like I use. Then again, using the product you are you might be better off doing what you're doing since you can't adjust the vacuum, nor monitor how much you're using (vac) which you need to be able to do in order to use the kind of resistance I'm able to use with my MV setup.
 
After yet another long day of stretching, I measured my BPFSL, and pulled to right at 9"! Flippin' sweet for sure! That's nearly a 1/4" increase in right at about a month of wear like this. I know it's not a permanent increase YET, but continued gains are on the way. It's a no brainer really. Stretch with constant resistance of a few pounds for hours at a time every day....duh? I'm getting the same fatigue in my penis, and base area (ligs) as when I was hanging.

I should note as I've already mentioned on the other forums I post on; I have switched over to using the MVII chamber for this application. I'm just getting a much better pull now.
 
stillwantmore2;297541 said:
One of the retractable keychains that you see people using in hospitals for example?? That can't be providing more than a pound if that of resistance? You should move up to a latex band like I use. Then again, using the product you are you might be better off doing what you're doing since you can't adjust the vacuum, nor monitor how much you're using (vac) which you need to be able to do in order to use the kind of resistance I'm able to use with my MV setup.
Click to expand...

It's true the key chain isn't giving me the lbs's I would like, but for comfort and weartime I'm not going for higher lbs at the moment. I think, as you say that I have to have a better vacu head to add more lbs and still have the comfort. But to get a little more lbs I run the string in the key chain double and this gives me about 2 lbs of stretch, as far as I have been able to measure.
 
stillwantmore2;297600 said:
Nothing personal but if you were to try hanging a 2lb weight from that keychain thing, it would no doubt "zip" right to the floor. rofl
Click to expand...

Yes if I don't have the string laid double it can't hold the weight. But with it double I could hang a 2 lbs weight from it without zip'ing.

One thing I've been think about your setup. If you wear it at work or a similar place, how do you ably the vacum on the head after you have been to the bathroom?
 
RoninTT;297753 said:
Yes if I don't have the string laid double it can't hold the weight. But with it double I could hang a 2 lbs weight from it without zip'ing.

One thing I've been think about your setup. If you wear it at work or a similar place, how do you ably the vacum on the head after you have been to the bathroom?
Click to expand...

There's a "no hand pump" technique that will work with low tension...2-5lbs. See the mynewsize.com/forum forums.
 
stillwantmore2;297793 said:
There's a "no hand pump" technique that will work with low tension...2-5lbs. See the mynewsize.com/forum forums.
Click to expand...

Ok sounds good :)

The only problem I see with your setup is the tension in the latex band will change to much from standing up to sitting down. This is a real concern for me as my work and school mostly is sitting down. So I would like to hear how this works out for you?
 
RoninTT;298121 said:
Ok sounds good :)

The only problem I see with your setup is the tension in the latex band will change to much from standing up to sitting down. This is a real concern for me as my work and school mostly is sitting down. So I would like to hear how this works out for you?
Click to expand...

Well, I work from home and spend most of my day sitting down. I've gained 1/8" this past month that I've been using this setup. Can you keep your leg extended while sitting down? That's usually what I do. ;)
 
stillwantmore2;298135 said:
Well, I work from home and spend most of my day sitting down. I've gained 1/8" this past month that I've been using this setup. Can you keep your leg extended while sitting down? That's usually what I do. ;)
Click to expand...

I can to some extend, but I big problem as I see it is visibility. Where I'm going to wear it there will be a lot of people around and it really need to be discreet. That is why I'm at the moment putting my velcro band right under the knee and not on the foot. If I put it on my foot people would be able to see the string stretching out my pants. I don't know if you have been thinking about visibility in your setup?
 
RoninTT;298261 said:
I can to some extend, but I big problem as I see it is visibility. Where I'm going to wear it there will be a lot of people around and it really need to be discreet. That is why I'm at the moment putting my velcro band right under the knee and not on the foot. If I put it on my foot people would be able to see the string stretching out my pants. I don't know if you have been thinking about visibility in your setup?
Click to expand...

Nope, havent really considered that. It is concealable though under baggy pants.
 
probably would lose tension but you could strap it to you thigh like a auto [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words], which i have and and a bib hanger. i just made a post on how they cut off blood flow and i keep haveing to take em off. fuck i wish i got this instead. maybe when i can afford it one day.
 
ok now im seriously thinking of getting one of these but as i read about this product on this forum some threads say its hard to get replacement sheaths? some pll say the sheaths wear out fast and it takes so long to order replacement sheaths months in some cases. is this true? whats up with this?
 
I use one sleeve on the hanger and one on my penis. They usually last at the least a couple months each. Smart thing to do is stock up so you don't run out. I've got a couple dozen of em now and plan to order some every few months. No big deal. There was a problem in the past with the sleeve supplier which made getting more difficult. Those issues have been resolved. I think someone on the thunders place forum actually made a post about how to make your own sleeves. I'm not sure how difficult that is though.
 
RoninTT;299947 said:
Hey just wanted to check in and hear if the setup is still working good and giving you some good results?
Click to expand...

No new gains yet to report, but still getting a good stretch.
 
i have emailed my new size 4 times to ask about there [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] and max vac they never emailed me back poor excuse for someone wanting to make money and also the guy at auto [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] forget these kind of small companies go to a large company that has a phone if they dont have a phone they dont need to sell anything. just my thought.
 
You must log in or register to reply here.
Back
Top