Pumps

[Greatdane]

Now what type of pump is everyone speaking on. I have seen these freaks pumping there penises in the fat tubes making there cocks massive like a girth of 10 and stuff like that that It's crazy it looks like they have a cock like two tennis ball tubes thick, just crazy that is a vaccum pump but would a pump like ones at the local video store work do those things help at all I am not sure.I was thinking about buying one of those to gain with but will it be perm after a while? Plus I heard those things are bad for your stick is that true. I would think that the more blood cells that it generates new would make your cock bigger, so that is why I was considering please elaberate if you guys would.

 

[jkisineffect]

my experiance from pumps is BAD !! i have bought cheap one's
and expensive one's BOTTOM LINE is they hurt my junk when i pumP

have you ever tried pumping you'r junk???? try it .. its not what its made out
to be ........ hope this helps

- johnny k

 

[joe_bloggs808]

Im gonna get a pump as soon as I find a reasonably priced one. Get one with a gauge and only pump at low pressures around 5hg. Most people here it seems have had good experiences but I guess its not for everyone. I think it is a good way to save a bit of time with my workout as time is always pressed.

 

[shojii]

I went a little more expensive (Boston Pump)...not an ad for them.......
And have been pretty consistent for about 6 [words=http://www.mattersofsize.com/join-now.html]mos[/words]. 2x/week. Except for the past three weeks when I got the PM. I never crank it on too much or too long (5-8hg and 20-30 minutes time wise. All the veins are there and looks very natural and hard as hell, no squishyness), and I have definately seen an increase that I would call permanent. Balls and "junk" wise. My old girlfriend absolutely felt the difference. My new girlfriend is thrilled so yippie... I started pretty happliy at a touch over 6" girth anyways and I can very happily put myself on non-pumped days or even take now three weeks off and be at just 6 1/2". No loss of size so great that way. I think the major setback for people is the too much too soon idea. "Hey it looks huge right now, lets go bigger". I know that its tempting but not the way to go.

 

[Ulcasterdropout]

I would never pump my balls...

 

[GhosT_DoGG]

shojii has a point there,
quick gains -- quick losses
slow gains -- small to no losses

Im gona buy the John Holmes Personal Pump, and go with a elastic cockring.
It's pretty cheap, so why not.

I was thinking of first dry jelq 10-15min(break down cells), then pump for 20-30min at deasent pressure. Do some helicopter shakes and put on cock ring, but not too thight.

Whatcha think of that shojii? Sounds bad? Good?

 

[shojii]

Hey,
sorry to take so long..... I think slow and consistent is the way to go. I don't know how good the Holmes product will be (vacuum wise) but, if it holds up its end do it. If you are gonna jelq first don't pump too long or you will definately get a doughnut from the fluid build up. if you are able do one at some point in the day and the other later on I think that would be a better course of action. Good luck and let us know how it goes.....

 

[GhosT_DoGG]

Thanks, my pump is at the post-office, at monday its mine! Wiiieee =)

I can only be able to do morning and night. Because I still live at home. =)

 

[sikdogg]

I didn't do any dry jelq before pumping, i just got myself erect and edged a few times before lubing up and pumping. I would suggest breaking up your 30 minute pumping session to two 15 minute sets or three 10 minute sets with ~200 wet jelqs in between sets and after the last set. In my experience, shorter sets with jelqs has been instrumental in reducing the donut effect for me. Wearing a cockring or cock cushion after helps to extend the effects for an hour or so after, just don't wear one too tight or risk getting a fat donut afterwards.

 

[GhosT_DoGG]

Just tryed the pump, I thought it was trash. Not much pressure in that fucker.
But well, it didn't cost me alot of money really. Cheap kit = shit suck.

I had expected a bit more from that... Thats it for pumping for me anyway.
Can't afford the better ones so...

 

[jakb]

Just tryed the pump, I thought it was trash. Not much pressure in that fucker.
But well, it didn't cost me alot of money really. Cheap kit = shit suck.

I had expected a bit more from that... Thats it for pumping for me anyway.
Can't afford the better ones so...

I bought a $60 Dr Joel Kaplan pump on ebay. Like it alot.

 

[TimBo755]

how much do the boston pumps run?

 

[smackmybitch]

I recently started to incorporate pumping into my manual routine.

goes like this

5 min warm up
5 eddging
10 min wet jelq
10 pumping
10 min jelq
10 min pumping
5 uli's
5 min warm down

My question is regarding, the right size tube. I presently have a 1.75 tube that, is about a 1/4 inch greater than my erect girth, so I thought.

when i am in the tube my upper shaft packs the walls, the mid does not, and my base does, after about 7 min, at 5hg

My glan touches the sides, to the point that my head elongates, and i can tell there is more preasure there than other places. I have also noticed that the tube is tapered, base size is 1.75. Should I be starting with a larger tube, say 2.00, one that wouldn't pack, at the top so easily, or should i wait till I pack the entire tube, before moving to the next size.

I believe the tube is 10' long, if thats the case, i've got around 1.5-2 inches before i hit the end of the tube, is this normal. i am 7 EBPL, last time i checked, and 5.5 EG, at the head, 5.125 upper shaft, 5.0 mid shaft, and 5.25 at the base.

 

[GhosT_DoGG]

I bought a $60 Dr Joel Kaplan pump on ebay. Like it alot.

It has good pressure and a pressuregauge also?

 

[sikdogg]

It has good pressure and a pressuregauge also?

Yes it does, i had one also but the handle broke after a few months.

 

[sikdogg]

...My glan touches the sides, to the point that my head elongates, and i can tell there is more preasure there than other places. I have also noticed that the tube is tapered, base size is 1.75. Should I be starting with a larger tube, say 2.00, one that wouldn't pack, at the top so easily, or should i wait till I pack the entire tube, before moving to the next size...

If you're looking for girth gains, then you will need a wider tube. If you're looking for length, then use your existing tube and lube up alot more.

 

[TimBo755]

what should the dimensions of the tube be for a 8.25x5.1 going for girth with a Joel Kaplan?

 

[jakb]

It has good pressure and a pressuregauge also?

It has really good pressure and a gauge. I can walk around with it on at my place. My handle hasnt had any troubles and I ve had it about 3 months, give or take.

 

[sikdogg]

what should the dimensions of the tube be for a 8.25x5.1 going for girth with a Joel Kaplan?

Your current diameter is right around 1 5/8" (1.62") and since you're looking for girth, you should prolly go with a 2" diameter tube. Length of tube should be at least 9" or more. A tube that big may suck your balls up when pumping so i would suggest that you get one of those silicone donuts to attach to the opening of the tube.

 

[TimBo755]

sweet sweet, how much do you think all of this would run me?

 

[TimBo755]

bump

 

[sikdogg]

A good cylinder will usually cost you around $75-100.

 

[TimBo755]

ouch, so all this stuff would put me back about 2 bills?


edit: you have any links to a good site?

 

[sikdogg]

Here's where i got my stuff from...


https://www.lapdist.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=all

 

[TimBo755]

so this pump and gauge? http://www.lapdist.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=SKU6&Category_Code=all

is the cylinder on there too?

 

[sikdogg]

If you click on the link that i posted above you can get just the pump, just the cylinder, or both as a kit.

The pump that they sell is the best... it's make of metal or it won't ever break. They also have very good customer service that if you ever have any probs with the pump, just call them and they'll get you squared away.

 

[TimBo755]

very nice, thank-you.

 

[carpenter]

This is my first post , so hey. If you want to try a pump out and not sink a lot of money into one just make your own. I made one for $35 and have been using it for about 7 weeks. I have a Mighty-Vac Pump-a-Gauge [which is a must] lines and cylinder.

This thing is tough; it will pump to 25 HG and hold for an hour [I did not do this on me, though!!!] I pump usually around 4-6 HG; which is enough to make it feel like the pump is pulling your dick off! I have gained 1/2 inch in length and 3/8 in girth so all I can say is I love it.

 

[TimBo755]

links to material? sounds interesting.

 

[carpenter]

I purchased my Mighty-Vac Pump with gauge at Auto Zone for $25. I went to Wal-Mart and found the cylinder. What I purchased was an aquarium gravel vacuum with a diameter of 1.68" which will accomodate a girth of approximately 5 1/2". Since then I have "stepped up" to a 2" cylinder that will accomodate a girth of 6 1/4". These vary in price from $6 - $20. I made a guard for the base of my pump using a piece of bicycle intertube that I cut to fit. The hoses that were needed came with the aquarium gravel vacuum; the adapters came with the Mighty-Vac Pump. The pump I purchased is able to do both dry pumping and wet pumping.

If you need to find a tube larger than 2" you can check to find acrylic tubing and make your own. All it takes is some tubing, a sheet of flat acrylic, air fittings, and acrylic glue (you can do a Google search, etc., to locate these via the internet.)

This idea came from Thunder's Penis Enlargement Forum if you need more info. The guys there are real helpful.

 

[TimBo755]

do you have any pictures?


thanks.

 

[carpenter]

Just got back on-line and saw your picture request. Here you go:

 

[TimBo755]

don't see anything

 

[carpenter]

Sory, the pictures won't download

 

[carpenter]

What do you have to do to show pic's ?

 

[TimBo755]

should be a code you put in; [.img]*url*[./img] put the url in the middle, leave out the periods inside of the brackets.

 

[carpenter]

 

[TimBo755]

you can email them to me Timbo8256@yahoo.com

 

[carpenter]

Okay - - still won't work. I'm mailing them to you direct, Timbo.

 

[TimBo755]

Thanks a lot man.. it helps me when I see a picture of things before i jump into putting something together. I appreciate it.

 

[TimBo755]

pics are compliments of carpenter

 

[1Sweet69]

You could probably build a tube pretty easily if you're not afraid of hand tools. I made my tubes out of good acrylic tubing. The tube is 1/8" thick so a 2" OD is 1.75" ID. The acrylic was about 18 bucks for 6' lenghs and the caps I got from the plumbing section in Home Depot or Lowes for 3 or 4 dollars. The brass npt to 1/8 niple is about a buck and the you're almost there. Go to a pet store and get a one way valve for 2-3 bucks and you're set. This is what I did and it works great - I just suck on the end of the tube and create enough vacuum that way - or you can use a hand pump - either works. If you're careful, you can heat the end with a heat gun and flare it - this gives it a comfortable fit against your pelvis. I've made 2", 2.25", and 2.5" tubes this way.

 

[TimBo755]

I don't have the tools to do that, if I did, I would.