MV-II, Quite Possibly the Most Comfortable Hang!!!

longstretch

longstretch

0
Just started using my MV-2 yesterday and I have to say it has been my most comfortable hanging sessions ever. I have hung 5 lbs once for 40 mins and have hung 5 lbs twice for 30-mins. At the end of each session I have had zero fluid build-up. I have gotten a small water blister w/ the original MV. Nothing serious but it did last for a day or two and I usually always have some fluid build-up at the end of a set. But with the MV-2 I have zero fluid build-up. The extra room for the head helps a lot I think. I have also gained a little girth so my new Max-Vac is a little bigger and it feels sooooo good to hang now. It used to be a little bit of a chore to hang but now it actually feels good. The MV-2 seals better than the original Max-Vac and makes it easier to hang. Just thought my boys should know.

Also the Vacu-hanger, Vac-extender 2 and anti-turtling sleeve from autoextender.com should be coming in the mail Friday or Saturday along with the basic Kaplan pumping package which should be coming in Friday or Saturday as well. Those of you that have the Vacu-hanger I would like to know how comfortable it is and what's the longest/(most weight) you've hung from it. I'll be able to compare the two next week. School's back in and I hang while I study so I'm hoping on making some good gains while learning at the same time. Hell I'll have everything I could ever need for Penis Enlargement by next week.

Has anyone else gotten their MV-2 yet? And if yes what are your thoughts?
 
Are you planning on upping the weight soon? I'd like to see how you make out with 8-10 pounds, I have noticed the reduced lymphatic effect with the Mv2's inner wall being straight, opposed to the MV1 92° inner wall pitch (tapered). The slight bowl effect at the end wall of the MV2 does provide better head room. I pawned the fact that I was experiencing less fluid because I got circumcised for Christmas.

I do recommend you add 1-2 cotton pads at the end of the cylinder for added comfort.

Are you using the 2 sheath method? One on the penis within the cylinder and one on the outside pulled over the inner sheath? I'm really finding 2 distinct ways to hang, one from the head: this limits weight because it's less comfortable than hanging from the base. To prepare, place the sheath on the penis 1/8" to 1/4" below the glans. Remove vacuum hosing. Insert penis into the cylinder about 3/4s of the way. Next, pull the sheath on the outside of the MV down and over the sheath on the penis. You want to maintain pushing the penis into the cylinder during sheath preparations. Replace vacuum hose (you will notice the MV2's nozzle is now ridged which [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] loads of stabilty to your hose/couplings. Finally, add vacuum until the head swells and the inner sheath is compressed against the inner wall. I find weights over 15 pounds can become uncomfortable while head hanging, but it gives the tunica a great stretch. This should take less than 30 seconds to prepare. Everything is right there for you.

The second way is base hanging. Way more comfortable. Simply place the sheath on the penis about 1-2 inches closer to the base of the penis. Remove vacuum hose, insert penis as far as possible (compressed into the cotton discs). Pull the outer sheath down. Replace vacuum hose & add a couple pumps with the mityvac. The pull will be felt originating from the top of the cylinder and sustained by the base of the penis. Weight and session time can be greatly increased. I can comfortably hang 18 to 20 pounds for an hour session with minimal fluid and practically no glans discomfort. I just keep all the pull behind the hanger and get a good grip at the base.

Glad you like it.
~BTC
 
Yeah today I noticed that on the inside where the small hole is for the vacuum there is a little bit of plastic that would have potential for a nice glans wound so I'll put a cotton ball in ASAP. I hang about an inch behind the glans and yes I will probably go up to 6 1/2 or 7 1/2 lbs tomorrow. I plan on getting 3 or 4 sets of 30 with 5 lbs today...already have 2 done. I've been hanging almost a year with the MV but its been off and on because of IPR routines and privacy. I'm thinking about starting a hanging journal. Do any of you guys have links to routines that I could sample?

Also BTC, do you now cut the sheaths longer?
 
The BTC Killer;276626 said:
because I got circumcised for Christmas.
Click to expand...

hi BTC

if i may, could you tell me how things have been since you got cut? i've been paying it serious mind recently and gathering hoards of info and testimonies. i know its a broad question, but you will no doubt disclose what i wouldn't think to ask.


keep pushing
 
Reber187;276697 said:
hi BTC

if i may, could you tell me how things have been since you got cut? i've been paying it serious mind recently and gathering hoards of info and testimonies. i know its a broad question, but you will no doubt disclose what i wouldn't think to ask.


keep pushing
Click to expand...

Well for one, hanging is more simple. I like the look better, and there is more friction during sex.
 
The BTC Killer;276698 said:
Well for one, hanging is more simple. I like the look better, and there is more friction during sex.
Click to expand...

hey BTC, thanks for the reply.

what about sensitivity overall and during sex or mastabation?

did you have the frenulum removed also?


keep pushing
 
Been hanging 6.9 lbs for 30-36 min intervals. It hasn't been everyday and the days I've been hanging the average hang-time is 1 1/2 hours. But man my dick is sore all over. Is it a good idea to hang when your fatigued like this. I've been thinking about doing girth work while the ligs are sore, what do you guys think.

I tried the hanging method right behind the glans and don't like it because its harder to keep a good seal, although I was able to hang the same weight. Also usually when I hang a little bit of skin comes past the glans and keeps it from sliding under the sheath when hanging. The most comfortable hang I've gotten is when the head is engorged and the skin doesn't have to keep the seal...I just gotta find a way to get like that each and every time.
 
I relaly like my MV2 as well--I'll spare the comments but they're alike yours. So far I have both the BIB and the MV2 and the MV2 is lightyears more comfy than the BIB--I'm uncut and I think the BIB is not really suited for those uncut.
 
Well I got my first fluid build-up session monday. I usually hang around 2-3 sets of 30-35 min but on monday I hanged 4 sets for 35-40 min. I also usually hang SO or SD but on the last set I hanged SU. I think it was because when the penis is being pulled up the skin gets a lot more pull than SO, especially the skin on the underside where most people get fluid build-up/blisters. So maybe its that I'm not that conditioned and also I didn't have the hanger on perfect but I was too lazy to mess around with it. Luckily I didn't get a blister.

I think I've noticed that my best hangs are after I cum or a session of pumping. I think its because the penis is more plump and fills the tube better, really if I start just a little hard I get the same effect. Also the only time I get fluid build-up really is when the skin is sucked past the glans. If I start with a chubby the head usually fills the tube, the skin doesn't get sucked past the glans, and the head is what is being pulled. Even though I got fluid build up the last time I'm really getting the hang of, well hanging. So much better than manually stretching, to me even though I still do that throughout the day.
 
Hey everybody!So much great information,yet I am confused on which hanger to buy?I have a few questions..hopefully anybody out there can truthfully respond to them so here goes...1. will I be able to gain the same amount with either the bib or the MV-2,or the vacuum [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]?2.What is the most popular hanger out there right now?Thank you.
 
penisbuilder;279915 said:
Hey everybody!So much great information,yet I am confused on which hanger to buy?I have a few questions..hopefully anybody out there can truthfully respond to them so here goes...1. will I be able to gain the same amount with either the bib or the MV-2,or the vacuum [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]?2.What is the most popular hanger out there right now?Thank you.
Click to expand...

I think the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] is just a supplement. I know I wouldn't gain from it alone. So far from what I can tell ya the MV-2 is the best hanger that I have (out of the original MV and the vacu-hanger). I don't have the Bib but I heard it can be uncomfortable, you have to wrap, and can't hang for long sessions. I don't know if you would gain any better or worse with the bib though, some say it grips the penis differently but I think you can gain from either one and the MV-2 would be more comfortable so its an easy decision for me.
 
Hey BTC,
Can I have that smoking kermit for my avatar here too. I don't really know anything about avatar's and I can't figure out how to get one.
 
MackIII;280047 said:
Anyone???? BTC???
Click to expand...

Oh I answered that in this thread http://www.mattersofsize.com/forum/showthread.php?p=278117#post278117

longstretch said:
Read the thread I started..."MV-II Quite Possibly the Most Comfortable Hang". BTC (maker of MV's) lists some of the differences between the MV-I and the MV-II. The original Max-Vac is tapered while the MV-II is straight, has a little cut-away place for the glans and something with the coupling attachment has been modified, like it has ridges or something. Also something I've noticed the plastic used seems to be thicker in the MV-II and the outside rim that you put your dick has a slight angling in to it.

I don't know if BTC has changed the sheaths or not. They seem to be shinier but that might be because I haven't had new ones in a while, and compared to my old ones the new ones he sent me were a little longer...but that might be coincidence.

To me the new slight changes make a big difference comfort wise.
Click to expand...

I think you could go on to the mynewsize forum and find out to in the Max-vac forum. www.mynewsize.com/forum.

BTC mentioned a couple of modifications in this thread also...
BTC said:
I have noticed the reduced lymphatic effect with the Mv2's inner wall being straight, opposed to the MV1 92° inner wall pitch (tapered). The slight bowl effect at the end wall of the MV2 does provide better head room.
Click to expand...
 
10inchadvantage;280079 said:
I'd like to hear an independent person's view on the MV2's pull vs the BIB.
Click to expand...

Yeah me too. I've heard that high weight can be an issue with the MV but I know BTC hung like 20+ lbs with the no-hand-pump method. But I'm sure the sheaths were brand spanking new because once those things go so do your hanging sessions. I like the MV-2 because of how long I can hang without having to stop every 17 min and rewrap.

I found the very perfect way of hanging. It involves using a max-vac sheath on the shaft and a vacu-hanger sheath attached to the hanger. Vacu-hanger sheaths are a lot thicker, durable, stickier, and can tolerate a stretching effect. It pretty much clamps down a little on your dick and creates the perfect vacuum.
 
Whats the difference between this and the vacu-hanger BTC sells?

Sorry for what might seem an obvious question but I have been off from pe for awhile now and rusty to say the least so anyhelp on BTCs pumps would be cool.

PMed but hes a very busy man so if someone could help me on this it be cool .. pm me if u wish.
 
longstretch;280319 said:
Yeah me too. I've heard that high weight can be an issue with the MV but I know BTC hung like 20+ lbs with the no-hand-pump method. But I'm sure the sheaths were brand spanking new because once those things go so do your hanging sessions. I like the MV-2 because of how long I can hang without having to stop every 17 min and rewrap.

I found the very perfect way of hanging. It involves using a max-vac sheath on the shaft and a vacu-hanger sheath attached to the hanger. Vacu-hanger sheaths are a lot thicker, durable, stickier, and can tolerate a stretching effect. It pretty much clamps down a little on your dick and creates the perfect vacuum.
Click to expand...

You're basically converting it into a TheGRIP/monkeybar's vacuum hanger-type hanger if you're doing that. I thought the key difference between those two and the MaxVac was that the MaxVac relies more on glans expansion rather than sheaths around the top half of the penis.
 
10inchadvantage;280356 said:
You're basically converting it into a TheGRIP/monkeybar's vacuum hanger-type hanger if you're doing that. I thought the key difference between those two and the MaxVac was that the MaxVac relies more on glans expansion rather than sheaths around the top half of the penis.
Click to expand...

It still expands the glans but its a sure-fire way to have a perfect setup every time (or at least the 10 or so times I've hung that way). Basically it creates a stronger seal so there is no slippage. Sometimes your glans deflate some after a while or the seal loses strength and my dick will actually slip into the sheath that is around the shaft. This has eliminated it.
 
You must log in or register to reply here.
Back
Top