always getting blister from PF now

pogzee · Jul 8, 2015

i had quit PE for awhile....but when i use PF now i am ALWAYS getting blisters aroung the tip of the glans.....why is this happening ????
i never useto to get them earlier .....
can the bell be small for me ???? it like perfect size right now but can the gator thingy cause this when i pump and the tip of glans touches the gator(the top end of the bell) touches the glans ???.....
i also tried keeping it at distance or pumping very less like one tip but still the blister comes...

what to do ???

also this has been hapening since i started using it with SG.....can the tension be doing this ???

templnite · Jul 8, 2015

Somebody was using strips of tape across the gland to relieve those issues playboi. But I don't remember what tape it was probably the medical type.

huge-girth · Jul 8, 2015

I think there should be a way to wrap the glans to enable us avoid the blister. Have you tried using a tape Pogzee?

master_mind · Jul 8, 2015

You cannot prevent water retention. Reduce the tension and it will be fine.

huge-girth · Jul 8, 2015

master_mind;653494 said:
You cannot prevent water retention. Reduce the tension and it will be fine.

Does it mean that the Phallosan cannotbeused at high tension for 1 hour without having water retention?

templnite · Jul 8, 2015

That's why you gotta keep a comfort strap prrraaat. Don't be lackin comfort playboi 57 ways in the clip, and one in the chamber.

pogzee · Jul 8, 2015

guys its a blister....not like normal water retention...........i never had this problem before since i used the PF for a month but now the problem has started arriving whenevr i use the PF with SG...

pogzee · Jul 8, 2015

templnite;653505 said:
That's why you gotta keep a comfort strap prrraaat. Don't be lackin comfort playboi 57 ways in the clip, and one in the chamber.

ur talking about the SG bro...im having issues with PF.......the blisters always comes right at the tip of the glans....

- - - Updated - - -

huge-girth;653492 said:
I think there should be a way to wrap the glans to enable us avoid the blister. Have you tried using a tape Pogzee?

is there a tape that i can use to wrap before putting the glans cap of PF on ????

templnite · Jul 8, 2015

Medical Tapes
There now hit that like, and thanks buttons.

huge-girth · Jul 8, 2015

pogzee;653509 said:
ur talking about the SG bro...im having issues with PF.......the blisters always comes right at the tip of the glans....

- - - Updated - - -

is there a tape that i can use to wrap before putting the glans cap of PF on ????

Well I don't know I was only asking. I want to try the VLC with the SG. How long do you wear the Phallogenetics before the blister comes?

User182811 · Jul 8, 2015

Do you still use the protector cap that they provide? Also use lots of medicated baby powder. Medical tape may help as well.

I haven't gotten a blister yet but occasionally my urethra (right at the tip) will get swollen and red from too much vacuum pressure for too long. Make sure to use the size that you can only fit about halfway in before you start pumping. Then pump slow and no more than 5 times. For you maybe only 3 or 4. Your tip doesn't have to touch the top of the bell.

One last thing, maybe don't go at full tension. Reduce it by like 25% and see what happens in a few days.

DLD · Jul 8, 2015

If it just started happening after some time of success you need to look at what has changed to cause this. Is it a water blister or a blood blister?

templnite · Jul 9, 2015

master_mind;653494 said:
You cannot prevent water retention. Reduce the tension and it will be fine.

Then why did you link to autoextender which has such a thing called "anti-fluid" tape, and is the same thing I was saying?
And why does the weasel ykm do their instructional vedios?

pogzee · Jul 9, 2015

tb007;653528 said:
Do you still use the protector cap that they provide? Also use lots of medicated baby powder. Medical tape may help as well.

I haven't gotten a blister yet but occasionally my urethra (right at the tip) will get swollen and red from too much vacuum pressure for too long. Make sure to use the size that you can only fit about halfway in before you start pumping. Then pump slow and no more than 5 times. For you maybe only 3 or 4. Your tip doesn't have to touch the top of the bell.

One last thing, maybe don't go at full tension. Reduce it by like 25% and see what happens in a few days.

yes i use the protector cap........
my glans fit perfectly in the small bell...its nearly touching the tip of the bell without even pumping...i pump only 1 or 2 times......

should i take the small silicone sleeve and put it on the medium bell and use ??? but the medium bell gets too loose and big for me....what to do ?

pogzee · Jul 9, 2015

doublelongdaddy;653530 said:
If it just started happening after some time of success you need to look at what has changed to cause this. Is it a water blister or a blood blister?

i had basically stopped PE for a while and as i started the first day i got a blister and everytime i used it after every recovery........i used it with the SG but i don t understand why will SG cause a blister on glans....its only got to do somethign with the PF...

the first one i had was a water blister but then it turned into a blood blister......then i have had only water blisters.....wasted fucking 3 weeks on this..dammm

- - - Updated - - -

templnite;653604 said:
Then why did you link to autoextender which has such a thing called "anti-fluid" tape, and is the same thing I was saying?
And why does the weasel ykm do their instructional vedios?

i cant afford so many equipments dude....i already spent alot on the PF>..

templnite · Jul 9, 2015

Sorry not sorry.

Aimingforthetop · Jul 9, 2015

As i have understoof.. you're in the bell of the PF.

With the protection cap on (the one provided)

And you have cleaned it up so its cleans.

And when you use it. You get blisters at the top of your penis. Correct?

What i would like you to do is to start and change the things you do (this is what a mechanic do to find errors on machinery).

First: clean it entirely with something that is made for this (if you use normal soap the ph balance will go acid and it will be like having your penis in an acid vacuum) so put the pf bell on with no tension what so ever. And wear it for an hour.

Blisters?

In that case we know there is something entirely wrong and it must be in the bell

If not then try and flip the glands protection cap over and use it the other way (if you always do this please move along)

Then put the pf bell on still no tension. And without the protection cap.

What happens?

If you havent gotten any blisters from this. We can conclude that the PF in it self is not causing anything (allergies. Smale stones in the equipment irritating skin. Lack of hygiene etc is not the cause!)

Now it is all in the tension.

Try and build it gradually up. With lowest tension first and then just slowly moving it up to the normal tension.

Now this can all be due to overworking perhaps your break made the penis unconditioned.

But best to check it out.

Also you will most likely learn alot from doing this.

User182811 · Jul 9, 2015

pogzee;653623 said:
yes i use the protector cap........
my glans fit perfectly in the small bell...its nearly touching the tip of the bell without even pumping...i pump only 1 or 2 times......

should i take the small silicone sleeve and put it on the medium bell and use ??? but the medium bell gets too loose and big for me....what to do ?

It sounds like you need to gain some girth. Do you have a bathmate? Try using the bathmate first or get yourself semi erect or even 3/4 erect before putting on the forte. They actually say to do that in the instructions.

DLD · Jul 9, 2015

Aimingforthetop;653640 said:
As i have understoof.. you're in the bell of the PF.

With the protection cap on (the one provided)

And you have cleaned it up so its cleans.

And when you use it. You get blisters at the top of your penis. Correct?

What i would like you to do is to start and change the things you do (this is what a mechanic do to find errors on machinery).

First: clean it entirely with something that is made for this (if you use normal soap the ph balance will go acid and it will be like having your penis in an acid vacuum) so put the pf bell on with no tension what so ever. And wear it for an hour.

Blisters?

In that case we know there is something entirely wrong and it must be in the bell

If not then try and flip the glands protection cap over and use it the other way (if you always do this please move along)

Then put the pf bell on still no tension. And without the protection cap.

What happens?

If you havent gotten any blisters from this. We can conclude that the PF in it self is not causing anything (allergies. Smale stones in the equipment irritating skin. Lack of hygiene etc is not the cause!)

Now it is all in the tension.

Try and build it gradually up. With lowest tension first and then just slowly moving it up to the normal tension.

Now this can all be due to overworking perhaps your break made the penis unconditioned.

But best to check it out.

Also you will most likely learn alot from doing this.

Excellent post and thanks for taking the time to explain. Some great advice, I hope it helps you pogzee .

pogzee · Jul 10, 2015

Aimingforthetop;653640 said:
As i have understoof.. you're in the bell of the PF.

With the protection cap on (the one provided)

And you have cleaned it up so its cleans.

And when you use it. You get blisters at the top of your penis. Correct?

What i would like you to do is to start and change the things you do (this is what a mechanic do to find errors on machinery).

First: clean it entirely with something that is made for this (if you use normal soap the ph balance will go acid and it will be like having your penis in an acid vacuum) so put the pf bell on with no tension what so ever. And wear it for an hour.

Blisters?

In that case we know there is something entirely wrong and it must be in the bell

If not then try and flip the glands protection cap over and use it the other way (if you always do this please move along)

Then put the pf bell on still no tension. And without the protection cap.

What happens?

If you havent gotten any blisters from this. We can conclude that the PF in it self is not causing anything (allergies. Smale stones in the equipment irritating skin. Lack of hygiene etc is not the cause!)

Now it is all in the tension.

Try and build it gradually up. With lowest tension first and then just slowly moving it up to the normal tension.

Now this can all be due to overworking perhaps your break made the penis unconditioned.

But best to check it out.

Also you will most likely learn alot from doing this.

thanks aim.....
1. i havent cleaned my PF since it has arrived....so i should now....but what should i clean it with ???
2. i have a feeeling that u are absoluely right on the part where my penis got unconditioned from the break........i think this is the cause and i should take it easy....thanks bro

- - - Updated - - -

tb007;653653 said:
It sounds like you need to gain some girth. Do you have a bathmate? Try using the bathmate first or get yourself semi erect or even 3/4 erect before putting on the forte. They actually say to do that in the instructions.

whats girth got to do with PF ????

always getting blister from PF now

Active member

0

Moderator

0

Moderator

0

Active member

Active member

0

Moderator

1

doublelongdaddy

0

Active member

Active member

0

Active member

1

doublelongdaddy

Active member

Similar threads