Hey guys,

I got the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] ages ago but kinda left it on the shelf after getting frustrated as it was uncomfortable. I've found a solution that helps me wear it with very little discomfort. I can only take partial credit as I got the idea from how Kingsnake was clamping with a cut down pump ring. I took the same idea and transferred it to the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. It stops pinching, base discomfort and 'sore sack' while allowing you to wear it normally. There is a link below to the doughnut I bought but anything similar will work. I realize for those guys that are already struggling with the base being too small that this wont be an option but you may be able to modify it further by cutting it down to just a doughnut. After all Penis Enlargement is all about adapting and ingenuity.

The pics show-the cut doughnut, how it fits into the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] base, the doughnut on(you have to put it on before the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]) and one I prepared earlier:cool:The after shot.

Here is the link to what you buy. I got mine off ebay but you may be able to pick them up cheaper somewhere else. They are called a 'Universal silicon pump sleeve.' They're about $11-$15.
http://www.ebay.com/itm/Universal-S...557?pt=LH_DefaultDomain_0&hash=item588972c67d

Im just starting BigAls [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] routine that Red posted (2nd post down on [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] page) any questions just ask. Thanks to Kingsnake for his inspiration here.
 
Great Idea...I was using a simple silicone pad with a hole in the center to prevent some pain, but was still getting discomfort on shaft when the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] was up and down positions, but having silicone go up the shaft a bit prevents that. Just did this with a similar sleeve I had and problem is solved. Thanks!
 
blancodb;542094 said:
Great Idea...I was using a simple silicone pad with a hole in the center to prevent some pain, but was still getting discomfort on shaft when the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] was up and down positions, but having silicone go up the shaft a bit prevents that. Just did this with a similar sleeve I had and problem is solved. Thanks!

Yeah the difference is amazing, glad this can help.
 
blancodb;542094 said:
Great Idea...I was using a simple silicone pad with a hole in the center to prevent some pain, but was still getting discomfort on shaft when the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] was up and down positions, but having silicone go up the shaft a bit prevents that. Just did this with a similar sleeve I had and problem is solved. Thanks!

Good to know!
 
CherryCoke;542482 said:
I find I dont mind the noose at all, it fits well and holds my penis firmly in place.

Hey CherryCoke,
I was more referring to the problem of the base digging into the pelvic bone/fat pad. Good to hear the noose is working for you. Everyone has their own preferences which is cool. It all comes down to what keeps you in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] for more hours. Good luck with your progress, keep it up.
 
Ramrod360;542615 said:
Hey CherryCoke,
I was more referring to the problem of the base digging into the pelvic bone/fat pad. Good to hear the noose is working for you. Everyone has their own preferences which is cool. It all comes down to what keeps you in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] for more hours. Good luck with your progress, keep it up.

Men are having a lot of luck with padding the base of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] with a soft, resilient material, like window insulation strips, soft cotton, etc.
 
doublelongdaddy;542706 said:
Men are having a lot of luck with padding the base of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] with a soft, resilient material, like window insulation strips, soft cotton, etc.

Yeah, there's a ton of cheap stuff available if you use a bit of brain power. My whole perception of a visit to the hardware store has changed. Now I look at stuff on the shelf and think "how can I use that to make my dick bigger"rofl I love the creativity of some people on [words=http://www.mattersofsize.com/join-now.html]MOS[/words], it's incredible.
 
ck396;543228 said:
hey I was wondering how you wrap and what materials you use?

Hey ck396,

My wrap consists of a square of soft foam that I fold in two to make it thicker. The foam came from a moon-boot that I had to wear when I tore my Achilles tendon. I don't know where you would buy it but if I had to replace it, which I eventually will, I would go for what DLD suggested above. The foam used for window insulation from a hardware store. Supra had a good post in the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words] forum about wrapping with the [words=http://TLCTugger.com/MOS]VLC[/words] which would transfer well for the wrapping for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. I'll try and find a link. I wrap the foam with a short piece of self adhesive bandage just to keep the foam in place while I attach the velcro attachment. Hope this helps you. Just ask if you have any more questions.

Ramrod.
 
CherryCoke;543549 said:
While it looks comfortable, I dont understand the need for the silicone pump ring on the base.
No problem. It's just an idea for guys that are finding the base uncomfortable. I can wear the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] all day with no discomfort from the base and anything that keeps you in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] longer is where you'll make progress. If you're not having that problem thats great.
 
ck396;545334 said:
im curious as to how far from the glans you apply wrap; does the rim of your head squish in?

I wrap just below or just over glans depending on how intense I am going. If hanging I like the ridge covered. If I am using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] I will go before the glans.
 
doublelongdaddy;545397 said:
I wrap just below or just over glans depending on how intense I am going. If hanging I like the ridge covered. If I am using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] I will go before the glans.

I find when I wrap about an inch below the glans they fold into the head "squishing" inwards. Although no pain, I kinda figured that wasn't normal so I tried wrapping just above the edge of glans. Could you give a more details about how you wrap when using [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] w/ velcro mod and how long you can go before taking it off for a break?
 
ck396;545515 said:
I find when I wrap about an inch below the glans they fold into the head "squishing" inwards. Although no pain, I kinda figured that wasn't normal so I tried wrapping just above the edge of glans. Could you give a more details about how you wrap when using [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] w/ velcro mod and how long you can go before taking it off for a break?

Hey ck396,

Im kinda like you, if I wrap too far back I turtle up and my glans pops back under the skin. When I wrap I pull the skin back gently (Im cut by the way) then start my wrap so the closest edge of the wrap is about half an inch from the glans. So when I let go there is a smaller amount of skin pushed up to the glans. I don't use huge tension on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], just enough to get a good stretch. But its a constant work in progress, I try different wrapping material but the basics are the same. Hope that helps.
 
Wrapping too low may not be the best place to attach for shaft and tunica gains but it will train hard the internal penis below the surface of the skin. Remember, the lower the point of stretch the more it serves to express inner penis and make gains from the base and below while attaching higher will be more geared towards tunica and shaft.
 
doublelongdaddy;545591 said:
Wrapping too low may not be the best place to attach for shaft and tunica gains but it will train hard the internal penis below the surface of the skin. Remember, the lower the point of stretch the more it serves to express inner penis and make gains from the base and below while attaching higher will be more geared towards tunica and shaft.
Thats great info DLD, good to know.
 
dont want to revive a old thread, but do not want to start a new one when it's basically covered here.

to the original OP or someone who has purchased the Silicone Pump Donut Sleeve. Did you have to modifiy it any? does it fit around the base of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] perfectly? Did you need to cut the whole bigger to fit your penis in it?
 
ayS;616516 said:
dont want to revive a old thread, but do not want to start a new one when it's basically covered here.

to the original OP or someone who has purchased the Silicone Pump Donut Sleeve. Did you have to modifiy it any? does it fit around the base of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] perfectly? Did you need to cut the whole bigger to fit your penis in it?

You might try pming him. He might not have subscriptions on. Last activity was Aug 31st 2014. That's if you haven't already.
 
smerc;616525 said:
You might try pming him. He might not have subscriptions on. Last activity was Aug 31st 2014. That's if you haven't already.

Thanks, i will give him a jingle. :)
 
I see your wrapping at the base of your glands is different from what [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words] provides. Can you share what type of material you use, including the Velcro that holds everything together?
 
Cusuco123;628720 said:
I see your wrapping at the base of your glands is different from what [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words] provides. Can you share what type of material you use, including the Velcro that holds everything together?

Hey Cusuco,

That wrapping is just a piece of thin soft foam. I cut it from a moon boot I had when I tore my achillies tendon. Its not crucial to use "this exact wrapping", just find something comfortable. The blue wrap is just some self adhesive sports wrap you can buy at any chemist/drug store or sports shop. Its the type that sticks to itself but eventually stops getting sticky so just cut some more. The velcro mod is just the standard mod from the forum here on [words=http://www.mattersofsize.com/join-now.html]MOS[/words]. Just search velcro mod and it'll pop up. Very easy to do and really comfortable. Hope that helps.
 
Hello, may I ask where can I buy those silicon?
I searched in ebay and only found the ones for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penis pump[/words].
Do I have to buy those and modify it by cutting them?
Aren't [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penis pump[/words] silicon is way too big for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]?
I dont want to buy the wrong things and I cant find one similar in the first post pic.

Please help me on my doubts. Thanks!
 
Buy the link below, and yes you may need to cut for comfort the exterior side walls or internal ring
I have a extra if you would like me to sell it to you for $2 less including shipping. I purchased 2 by mistake to do my mod PM me.

Amazon.com: California Exotic Novelties Universal Pump Sleeve: Health & Personal Care

supaston;635213 said:
Hello, may I ask where can I buy those silicon?
I searched in ebay and only found the ones for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penis pump[/words].
Do I have to buy those and modify it by cutting them?
Aren't [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penis pump[/words] silicon is way too big for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]?
I dont want to buy the wrong things and I cant find one similar in the first post pic.

Please help me on my doubts. Thanks!
 
How do you put the velcro attachment with the new [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]? The design is a bit different and I can't figure how to put it on. Also, people are talking about cold or blue penis while stretching. I've read you should not let your penis become blue but as soon as I stretch to maximum length, my penis become blue. Is it OK? I think it's impossible to stretch to your max length without cutting blood flow, am I right?

Thanks
 
split98;736855 said:
How do you put the velcro attachment with the new [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]? The design is a bit different and I can't figure how to put it on. Also, people are talking about cold or blue penis while stretching. I've read you should not let your penis become blue but as soon as I stretch to maximum length, my penis become blue. Is it OK? I think it's impossible to stretch to your max length without cutting blood flow, am I right?

Thanks

Hey Split,

Im not sure about the new [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], I havent used mine in a long time. They are definitely effective, but I found I could not do much while wearing it. Sitting at the computer or watching TV was fine, but walking around and doing stuff was too difficult. Thats just my experience, others may differ.
As far as blue or cold goes? Yeah I'd stay well clear of that for sure. Some guys I've read that have had good success with [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] were at just short of max tension, but for loooooong periods of time. there are programs you can follow that some vets have written up somewhere in here I just cant remember where. Hope this was helpful.
R
 
split98;736855 said:
How do you put the velcro attachment with the new [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]? The design is a bit different and I can't figure how to put it on. Also, people are talking about cold or blue penis while stretching. I've read you should not let your penis become blue but as soon as I stretch to maximum length, my penis become blue. Is it OK? I think it's impossible to stretch to your max length without cutting blood flow, am I right?

Thanks

The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] has not changed for years, what are you referring to my Brother?
 
well, in the velcro mod video, the tip of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words] is different. no holes in the middle and no vents on the side to put the velcro. DLD what do you think about blue penis head? Is it normal? I mean... If I want to stretch to my max without slipping, it has to be thight right?
 
Last edited:
split98;736981 said:
well, in the velcro mod video, the tip of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words] is different. no holes in the middle and no vents on the side to put the velcro. DLD what do you think about blue penis head? Is it normal? I mean... If I want to stretch to my max without slipping, it has to be thight right?

Carefully use a exacto blade or razor to slice the necessary slot to accept the velcro. I am confused why this would not already be there, it was made for the Velcro????

Yes, a purple head is normal under constriction. I would not be in this state for longer than one hour. Before doing any constrictive work try to squeeze as much blood out of the head as you can.
 
I'm not gonna use the velcro then. I dont want to breake the tip of my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] or make it weak. I have a question about pumping after using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. It hurts AF when I pump after stretching, just the head. Is it something normal? I always read that pain is not a good [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sign[/words] so I stopped. Also, after a 5-6h using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], my penis is sensitive and I have a hard time to jelq. What can I do to avoid this?

thanks again
 
split98;737037 said:
I'm not gonna use the velcro then. I dont want to breake the tip of my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] or make it weak. I have a question about pumping after using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. It hurts AF when I pump after stretching, just the head. Is it something normal? I always read that pain is not a good [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sign[/words] so I stopped. Also, after a 5-6h using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], my penis is sensitive and I have a hard time to jelq. What can I do to avoid this?

thanks again

I answered you in your other post.
 
Back
Top