Is there ever going to be a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x50[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words]? to compete with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]goliath[/words]? atm you have to go back in technology to get a larger size.
Hydromax X50 Xtreme
- Thread starter growingwriter
- Start date
-
- Tags
- 9 inch bath mate bath-mate bathmate bathmate goliath bathmate herc bathmate hercules bathmate hydromax doublelongdaddy elongation exercise exercises extenders extreme gain gaiter gator girth girth gains hydro max hydro-max hydromax hydromax extreme hydromax x20 hydromax x30 hydromax x30 xtreme hydromax x40 hydromax x50 hydromax xtreme larger pumping review sleeve vacuum x20 x30 x40 x50 x50 xtreme xtrem xtreme
You might PM Craig in case he doesn't see this thread: http://www.mattersofsize.com/forum/members/bathmate-craig/
Read something about one arriving early 2014, but I'm not sure if that site was affiliated w/ [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]. Sure wasn't true
Maybe 2015.
Read something about one arriving early 2014, but I'm not sure if that site was affiliated w/ [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]. Sure wasn't true
Maybe 2015.I'll happily register my interest, I've had visions of buying a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]goliath[/words] and modding it with the pump assembly from an extreme. Would be so difficult and expensive. Some websites quote the internal max size of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words] as 11.5" but I think this must be with an uncompressed [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words], as other sites claim 8.5". One day I'd like to get to 10" length, even if it takes me 10 years. would be good to have a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] that could handle that
I have one. It's called the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] with wine vac. It'll rip your dick off if yer not careful.
I did try and mod my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]hercules[/words] with the winevac mod, I don't know whether the seal I got was slightly the wrong size or I did something wrong, but for whatever reason it just would not stay affixed. tis a shame really. maybe the next generation of bathmates could have interchangeable components so you could tailor make them to what you want from them. I was thinking that a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] could have a screw thread and two sections of plastic above the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words], that you could turn and lengthen to use the chamber as a length exercise. I wonder if that would work
growingwriter;617098 said:
Here are a few alternative sealing options if the rubber stopper thing from the vac mod wasn't working for you.
Silicone sleeve piece: http://www.mattersofsize.com/forum/...ump-forum/83589-wine-vac-help.html#post590781
[words=http://TLCTugger.com/MOS]VLC[/words]: http://www.mattersofsize.com/forum/...to-increase-vacuum-pressure-8.html#post611043
O-ring: http://www.mattersofsize.com/forum/...to-increase-vacuum-pressure-8.html#post611228
Would be nice if the accessories were sold separately and were interchangeable w/ different [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] versions.
A [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] tube option w/ a screw adapter for adding more length would also be a genius idea. Then they could just sell sections for upgrades. Just like how [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] have rod extensions.
Would be good ideas to send them.
growingwriter;617088 said:
the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] will take you to around 9.5 inch in length, and 6.9 inch in girth, depending on the level of temp gain you get.
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] probably wont make an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x50[/words] as there isnt enough demand for it compared to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words]. they may prove me wrong, but it probably wont happen atleast for a little while
smerc;617106 said:
It would be nice, but no fing way would they do it. What's the going Rate for a xx30? Like 399... F that. They have no reason to sell us dudes a hand pump for 75-150 when we can just vac mod. I'm sure if they do end up making some down the line, they won't be affordable. They will however be bought by people who don't want to spend the time or headaches to mod their [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] themselves.
As an aside, I you Re having an issue with keeping your adapter affixed to you [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]? Fuck it. You can still hold it over the end with a firm, but gentle amount of pressure as not to set off the valve, and draw up with the wine vac to pull out some h20 and increase your pressure.
x30 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words] = $300
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words] = $350
Yeah, it would probably hurt them in the long run doing it like that.
However, they could benefit on lost $$$ from people not being able to afford the upgrades and just not buying all-together.
End in the end, a lot of people will shell out the money regardless. So there probably isn't much incentive to make things that profitable.
They really own the market on water pumps.
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words] = $350
Yeah, it would probably hurt them in the long run doing it like that.
However, they could benefit on lost $$$ from people not being able to afford the upgrades and just not buying all-together.
End in the end, a lot of people will shell out the money regardless. So there probably isn't much incentive to make things that profitable.
They really own the market on water pumps.
I just had the idea mainly that their system could be modified to also benefit length greatly as well. You do get a bit of length from [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] work and you can use it to do specific exercises that help, but I was thinking that this modification would really help.
You could leave the unit static and pump it for a girth routine, and then for a length routine set it so the screw is at the minimum point - establish a small amount of pressure and then use the screw action to concentrate the pump force along the length. It seems like it would work, I wonder if it would help
You could leave the unit static and pump it for a girth routine, and then for a length routine set it so the screw is at the minimum point - establish a small amount of pressure and then use the screw action to concentrate the pump force along the length. It seems like it would work, I wonder if it would help
View attachment 29763
Like this. Your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] would be attached to the bottom of this, and then a second outer piece would slot in around these screw grooves. It steps so the backward pressure cant slowly screw it open.
Like this. Your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] would be attached to the bottom of this, and then a second outer piece would slot in around these screw grooves. It steps so the backward pressure cant slowly screw it open.
jordey;617137 said:
It does. I think he means length extension though. That was the first explanation. Didn't quite get the 2nd one.
Was thinking something like this. Where it's 8" in total length, then you purchase an adapter that can screw onto the screw section and make it 10+" length.
maybe. if the entire tube assembly was manufactured and sold as one piece it'd be a lot easier, and you could swap out the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] as a screw on and the pump as a screw on to the top of the tube. then you could have many girths for the same pump valve, at least
jordey;617203 said:
Yeah, but not w/ adjustable girth tubing. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaitors[/words] would be for different tube sizes instead for different pressures like the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words].
I like your idea about the screw tops-of-tubes smerc, you could add length easily that way. My complicated idea was to try and make it easier to use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] to add length, and I'm currently trying to work out if its worth while devising some kind of baffle or padding that would go into an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words] to restrict the pump to a length routine
growingwriter;617210 said:
There is that also. Different acrylic/polycarbonate cones that fit inside to make the girth sizes smaller, therefore targeting the vacuum more towards elongation/length.
Good idea!
I would just get an air pump cylinder and target length through air pumping. Leluv sells them for cheap.
Well the reason I bought a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] (and i'm sure i'm not alone) is that with the water pressure, its hard to overpump and cause permanent damage in one session. At the moment I'm planning on a [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] with a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words] for length work, especially as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] wont even be long enough to accomodate the 10" eventually want to get to, no matter how long it takes.
i think the main issues with trying to make it adaptable, apart from the cost and complexity of production, is that for length you need a tube which isnt much bigger than your girth. with a pump that thin the gator would likely be a big issue with digging in, as opposed to air pumping
smerc;617253 said:
8" in length and 5.4" girth right now
growingwriter;617330 said:
You're wanting to surpass 10" or just get to 10" cemented?
Was thinking about the whole gaitor thing being difficult to fit an adjustable tube. Seems like you could bypass a lot of that issue w/ using a winevac type thing to get suction, rather than pumping the gaitor itself.
10" cemented I think. I'm upgrading my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] because i'm feeling I don't have the room to expand as much as I used to, so I think my gains from using it have slowed as a result. Thats why I think a supersized device is good - I'd never get to 12" internal length but if there was a device with that, then it'd accommodate my eventual goals. I do understand though that the majority of their customers wont want such a large device and so they haven't gotten around to it yet. Perhaps they've had poor [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]goliath[/words] sales and so they are wary of going that large again. It is a shame though
smerc;617439 said:
I would love to have a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] and get to take advantage of the extra vacuum it would offer over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words]. I have no choice but the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words]. I remember having to test the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hercules[/words] when it came out and I could not fit half my junk into it and pulling it off was impossible. When the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] came out I was finally able to pump. So looking forward to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words].
smerc;617526 said:Can see you being the first to review one, since you seem to fit the description of someone who needs it. So maybe you're the first to know if something did come in the works.
I felt left out for a long time until they finally came out with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words], everyone was making great girth gains and I really could not participate on the same level.
I wonder how hard it would be to modify a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]goliath[/words] with the valve and pump from an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words]...
ideas are one thing, having the funding to enter into a market and compete - especially in this litigious world is another. Maybe some of the ideas we've mentioned could be looked at by the owner of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] company, but I think that's all we can realistically hope for
doublelongdaddy;617495 said:
Will the pump that comes with the extreme bath mates not fit in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] valve?
no, there is no hole for the fitting from the hand pump to slot into the valve on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]goliath[/words]
Damn.