HELP with SizeGenetics Extender

B

BIGDADDYBOOTYBREAKER

0
Hey guys, just got my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] today in the mail. I put it on and it feels more comfortable than I thought it would be, however I am having problems with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words]. The videos provided with the device explaining how to use it quite honestly suck. The videos look like a fast power point slide presentation and it briefly goes through the explanation of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] so I hope you guys can help me out. First of if I twist the little knobs as suggested in the videos all I do is unscrew the legs from the base it doesn't really increase the strength of the spring I feel, so I figured maybe I have to hold the spring as I twist the knob... But that didn't work either if I do that then the spring unscrews. What am I doing wrong?

Also once I figure this out, how many hours should I wear under tension and how many hours should I wear it with low tensions for healing?


Thanks guys!
 
I can't help you with the unscrewing problem but you should wear it as long as possible, being sure to check your glans for numbness/coldness. Take it off every hour or so to get blood circulating. Being a newbie to an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] make sure you take it slow at first. You don't want to have too much tension at first. And you should wear it at a tension you can wear for a while. Your penis will loosen up in it and you'll have to adjust it periodically while you're wearing it to keep it stretched. Just take it slow and find out how your penis reacts, there's no point in holding a high tension if you can only wear it comfortably for 10 minutes
 
Thanks for the tips.

But yeah I don't know if the unscrewing is a problem, because I mean... thats just how the thing is made its just a bunch of threaded tubes. I guess I am not understanding how to add tension... Do the springs become stronger or do you add tension simply by making the rods longer by unscrewing after having put on the device? Because its confusing how they talk about the springs having between 900-1500 grams of tension but nowhere on the device is this marked, a users manual would've been nice. Hopefully someone with more experience can chip in.
 
Last edited:
First, use the keys they give you to tighten all your bars. If not, sometimes when adding tension you will spin the bars out of their threads.


Second use your fingers or a set of needle nose pliers and make sure the hex tension bars are tight to the adjustment screw knob. Not death tight - but if I don't do this once a week the left hex bar will spin freely when adjusting tension aside from the adjustment knob.

As stated well above, low tension you can tolerate for as long as possible. Circulation every hour, and shoot for as many hour sets as possible. Adjust tension throughout by spinning the adjustment knobs towards the penis.

The knobs should move away from the base plate and the hex tension bar will slide further into the spring sleeve compressing the spring, adding more tension.

Go slow, a few turns every 15 minutes or so. You should see the tension lines disappear.


Also I believe you should have the new one with the 2300g springs.


Hope that helps
 
Also,

If you are unscrewing all the way out the base you might need more bars to start with.

I stretch my penis out flaccid and put just enough bars on that with the hood component the device is just slightly longer than my stretch by a few cm


Doing this I rarely get past medium tension without a good stretch
 
Oe13it;571385 said:
Also,

If you are unscrewing all the way out the base you might need more bars to start with.

I stretch my penis out flaccid and put just enough bars on that with the hood component the device is just slightly longer than my stretch by a few cm


Doing this I rarely get past medium tension without a good stretch
Click to expand...

Thank you OE13IT for your advice, greatly appreciated I assure you!
 
Oe13it;571385 said:
Also,

If you are unscrewing all the way out the base you might need more bars to start with.

I stretch my penis out flaccid and put just enough bars on that with the hood component the device is just slightly longer than my stretch by a few cm


Doing this I rarely get past medium tension without a good stretch
Click to expand...

Thank you OE13IT for your advice, greatly appreciated I assure you!
 
Hey rock - did you figure it out yet or still having difficulties?

Be patient with each new devise it takes about a week or so for me to out each new devise.
 
Oe13it;571611 said:
Be patient
Click to expand...


Patience is the HIGHEST virtue in Penis Enlargement, while Gentleness with Self is second. All things are in time and rushing to get to a place that requires a map with your eyes closed will most certainly cause one to fall. Take your time, read and research your quest, study the users who have come before you who are doing what you want to do. When you do pick up a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words], [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words], or any other new device for that matter, give yourself a fair chunk of time to truly understand and appreciate what you have, what it can do for you and how to use it the most effective, safe way.
[words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] speaks top these issues with great wisdom. As I hone and rewrite the newest [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] Routine for publication I am being sure to include every detail possible to make it the New Testament of Penis Enlargement. To me, if I am going to do something it is going to be the best in the world, I do not mrs with underdeveloped muscle, I want my creations to be so much more than what the user expects. I want to always be sure that all of the Brothers see that their contributions have always played a synchronistic part in the play of [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] with me. Without the unreal commitment we see here, the many Brothers who put forth always with great altruism, I, as a responsible leader need to be present with them in their work. It is here where the secrets of manhood lurk.
 
Oe13it;571611 said:
Be patient
Click to expand...


Patience is the HIGHEST virtue in Penis Enlargement, while Gentleness with Self is second. All things are in time and rushing to get to a place that requires a map with your eyes closed will most certainly cause one to fall. Take your time, read and research your quest, study the users who have come before you who are doing what you want to do. When you do pick up a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words], [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words], or any other new device for that matter, give yourself a fair chunk of time to truly understand and appreciate what you have, what it can do for you and how to use it the most effective, safe way.
[words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] speaks top these issues with great wisdom. As I hone and rewrite the newest [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] Routine for publication I am being sure to include every detail possible to make it the New Testament of Penis Enlargement. To me, if I am going to do something it is going to be the best in the world, I do not mrs with underdeveloped muscle, I want my creations to be so much more than what the user expects. I want to always be sure that all of the Brothers see that their contributions have always played a synchronistic part in the play of [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] with me. Without the unreal commitment we see here, the many Brothers who put forth always with great altruism, I, as a responsible leader need to be present with them in their work. It is here where the secrets of manhood lurk.
 
Oe13it;571611 said:
Hey rock - did you figure it out yet or still having difficulties?

Be patient with each new devise it takes about a week or so for me to out each new devise.
Click to expand...

Hey thanks for your help, really appreciate itw
I think I understand now, I followed your instructions tightening everything, getting the hex and the knob tight together and I guess you where right I needed nd extra bar for starting otherwise I would unscrew completely.

So here is how I understand this device works, you can correct me if I am wrong. Basically is like you said tighten everything, I also tighten the knobs down to the base. So when I put the device on, I turn the knobs and the start to unscrew and push the hex bar into the spring thereby adding tension.

But if this is right then I wonder if I am getting enough tension since I can only put down one line off the hex bar without completely unscrewing, so maybe I should add another bar but then I don't think I would be able to put the device on since already the initial stretch to attach the holder to the bars is very uncomfortable.

Thanks again guys.
 
Ok so I just added another bard, right now I am using the 2 big bars and the two smallest bars. The tension feels good, I don't want to push it too much but I feel I might be able to switch the tiny bars for one size bigger...
 
rocky1243;571696 said:
Ok so I just added another bard, right now I am using the 2 big bars and the two smallest bars. The tension feels good, I don't want to push it too much but I feel I might be able to switch the tiny bars for one size bigger...
Click to expand...

Love it! The addition of bars is like an addition to the ruler! Excellent and good that you feel comfortable with the increase.
 
rocky1243;571696 said:
Ok so I just added another bard, right now I am using the 2 big bars and the two smallest bars. The tension feels good, I don't want to push it too much but I feel I might be able to switch the tiny bars for one size bigger...
Click to expand...

Love it! The addition of bars is like an addition to the ruler! Excellent and good that you feel comfortable with the increase.
 
doublelongdaddy;571725 said:
Love it! The addition of bars is like an addition to the ruler! Excellent and good that you feel comfortable with the increase.
Click to expand...

Thanks!

Yeah it feels good to know I'm working towards a positive goal. Oddly enough I feel I am starting to see little improvements even though Ive been doing this for so little time. Anyways I decided I am not going to measure until a couple of months and just go by the increase in bars etc. .
 
Rock

You got it man.

When I don't have enough bars I can't max out the tension. But sometimes I'm not ready for the extra bars. I play around slowly adding bars. Adding small increments.


Remember, it's not the max tension your after, healing extended. If that's at 900g for 6 hours it's better than 1500g for one hour. Do what's comfortable. But it sounds like you are doing what I'm doing.


I was doing Penis Enlargement for 6 weeks on and off, the last two weeks I had the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and it used it like that and had 3/8s in length from first to last measurements, I felt most of that length came in the last two weeks due to using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] as you are describing.


Keep it up.
 
Hey thanks for the feedback, hheheheehehe I worry sometimes in the initial stretch to set up the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] I will rip off my penis but once its set up the intensity feels right.

Surprisingly I am noticing girth gains even though I am doing no girth work, all I am doing is basic stretches and 4 hours of [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] a day. But the girth gains are very apparent more so than the length gains.
 
That is somewhat interesting. Using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] you will get some girth gains, from what I've read....but have them more apparent than length is like nothing I've read.

Girls like girth, more than length, so I wouldn't complain.




Additionally, the way I use tension is to look at how far I'm pushing those tension nuts up... If it's enough to add the small [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] bars, I need to add the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] bars and lower the tension.
 
Oe13it;572224 said:
That is somewhat interesting. Using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] you will get some girth gains, from what I've read....but have them more apparent than length is like nothing I've read.

Girls like girth, more than length, so I wouldn't complain.




Additionally, the way I use tension is to look at how far I'm pushing those tension nuts up... If it's enough to add the small [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] bars, I need to add the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] bars and lower the tension.
Click to expand...

I know right, that is what I had read also. But when I first started I remember the base of the penis being really thin when I put the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] on. Now it has even out and it looks strong, with out a doubt it is thicker I can even tell when its flaccid.


As far as the tension goes, right now I am almost down to the last stripe on the hex. I don't know if to add another bar or to switch the smaller bar for a one size higher bar but putting on the device with the bars I have on right now is a little tricky so what I am doing is putting on one side first and then the second.

All this has happened in two weeks, can't wait to see the results after a couple of months.
 
Woah ok just graduated from Bar size.

I had the 2 Largest bars with 2 Smallest bars, I upgraded the 2 smallest bars one size up and I am near max tension without feeling uncomfortable. However the setting up part still gives me difficulty getting the head attachment over the bars.

EDIT: That was actually a bit of a workout, but I was able to complete a one hour session. After that going back to my old bars was easy, so I am doing that to heal at a extended length for and hour or 2.
 
Last edited:
pjp2002;572233 said:
This may help if you're having trouble getting the head attachment on there. When getting the more bars it's difficult to slip the head piece onto the bars. So instead I will put the bar attachments already into the head piece and screw them in.

Check out the second video in the link with the velcro mod to see what I'm explaining.

http://www.mattersofsize.com/forum/...izeGenetics-extender-with-Velcro-Modification
Click to expand...

Thanks a million for this, it made it sooooooooooooooooooooo much easier.


BTW Update, I am feeling ready to add another bar soon. I have not measured but it has to be longer if Ive been increasing the bars, however it is definitely thicker. It is visibly thicker and I know this is not the main gain with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] but for some reason I am experiencing substantial girth gains and I am not complaining LOL All gains are welcomed.

P.S. I am currently not doing any girth work whatsoever just basic stretching and [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words].
 
You must log in or register to reply here.
Back
Top