- Joined
- May 8, 2004
- Messages
- 2,151
I'm not faimilar with any of this shit. What's that protection pad for? on the part catalog? 596020-7
Weird...ordered a Vimax, got a JES??
- Joined
- Jun 20, 2003
- Messages
- 3,707
REDZULU2003 said:
You could certainly make a comparable device for much less, if you have the know-how. But I don't think the same materials and set-up could be made for $25, especially the spring-loaded rods.
- Joined
- Jun 20, 2003
- Messages
- 3,707
Oh, I got the cardboard box. I would have loved the wood box. SWM, you're a lucky SOB for getting the wood box.
- Joined
- Nov 9, 2004
- Messages
- 72
Pm me and Ill see about getting ya the wood boxpenguinsfan said:
Im not in the shipping dept. so i dont know how that end works all that well
again : you guys can not make this product for 25$ ... the materials we use are much much stronger than the stuff you get straight from the hardware store ... if we could make these for 25$ woudnt we be selling them for alot less than 150$ ? The market standard is 299 but we are giving MoS a great discount. If we could make this product for 25$ we would be selling these for 50$ each so we could move 1000x more product a day than we currently do and increase our bottom line
but simply you can not make a legit working safe product for 25$
Think about it
Years ago I owned a "Penistretcher", which appears to be quite similar to the vimax, jes, etc. I sold it for 50 bucks on ebay. I didn't like the noose, which I found cut off circulation and could only be worn for brief periods. It was also a little painful. I think this would be a good product and I would consider buying one if you could redesign the noose attachment into something a little (lot) more comfortable.
fillerup
fillerup
- Joined
- Mar 16, 2004
- Messages
- 1,821
Chris, i think you're missing the point. We understand that a $25 copy of your product isn't going to be quite as good as your product, but if it can do 90% of what your product does then it's certainly worth the effort for alot of guys that don't have $150 to spend on buying an original. That's not to say that they won't buy your product down the road when their finances allow. Many bros here have made their own hangers in the past and have made gains with them, but when they have an opportunity to buy a Bib, they usually do. I think that this logic applies to your product as well, $150 is certainly not that far out of reach for most people but buying a stretcher is also not the highest item on most peoples list of priorities.ChrisViMax said:Pm me and Ill see about getting ya the wood box
Im not in the shipping dept. so i dont know how that end works all that well
again : you guys can not make this product for 25$ ... the materials we use are much much stronger than the stuff you get straight from the hardware store ... if we could make these for 25$ woudnt we be selling them for alot less than 150$ ? The market standard is 299 but we are giving MoS a great discount. If we could make this product for 25$ we would be selling these for 50$ each so we could move 1000x more product a day than we currently do and increase our bottom line
but simply you can not make a legit working safe product for 25$
Think about it
- Joined
- Jun 20, 2003
- Messages
- 3,707
Fillerup said:
Someone bought your used Penis Enlargement equipment?
- Joined
- Nov 9, 2004
- Messages
- 72
I got an answer on the reason why some are getting boxes and some arnt
we got a pretty large shipping operation going on and we are always getting new guys working for us and the wooden boxes come with a diffrent order and not with the 150$ orders
so if you got a wooden box ... consider your self lucky lol
we got a pretty large shipping operation going on and we are always getting new guys working for us and the wooden boxes come with a diffrent order and not with the 150$ orders
so if you got a wooden box ... consider your self lucky lol
- Joined
- Dec 4, 2004
- Messages
- 60
. I've been wanting one of these for some time but that price was WAY too prohibitive so when this deal came up I couldn't resist. I also had to join MoS and can't express how glad I am that I did!! I've joined other sites with "NEW techniques not found anywhere else..." and they contain no more info than DLD's PHASE 1!!! with FOUR phases Mos is Lightyears ahead of ANY free or paysite I've joined.
. I just got my Vimax/JES yesterday. I'm temporarily tearing down walls at work and aren't interested in testing their warnings against wearing while in danger of slips/falls. So I'm only wearing it in the evenings. I can tell you all this;
. the noose IS uncomfortable, I'm circumsized so slipped it between the head and scar. puuled the noose thight and started cranking up the pressure. perhaps i went a bit too far, but the noose pinched quite a bit, biting into the Oh so tender skin behind the head.
. After a few hours I had to use the (beginning users) foam ring, which ripped through while trying to stretch it to fit over my head (YES, the little one!). It was actually easier to put on that way and position under the noose and made it much less painfull. I was able to continue using the stretcher for another 3-4 hours.
. Tonite I decided to try a bit of modification. For comforts sake I pulled my shaft skin up to protect that skin just behind the head - I don't know if all cicumsized men can do this, while i have no foreskin, my shaft skin is pretty loose and when flacid comes right up to the edge of the head protecting that pink skin. so this may not be a viable option for some (personally I'm hoping it may help with some foreskin restoration, I tried a TLC tugger but couldn't even get it on!). Anyway I wore it that way for about 2½ hours before the pinching bacame too much to take any further.
. I'm cooling off for a couple mins before I try again with that foam ring.
. I've already learned a couple things.
1. The noose does NOT have to be extremely tight, at first I put a death grip on my poor head! That didn't last long, got cold and VERY dark purple. Loosening the noose a bit I found it much more bearable but not comfortable, the foam ring REALLY helps.
. 2. Pulling up the skin is more comfortable and I'm goin to try that with the foam ring. I also pulled the noose TOO tight again and am going to try to remember to keep it looser, though one's instinct is to crank it down and go for maximum stretch.
. In response to KindD's repeated request for a different head assembly;
I don't see why you can use a wider strip of soft cloth or leather with the head assembly, or even fold a strip of wash cloth and place it under the noose (as I'm planing to try in a few days if this discomfort persists.
Finally, I'd like to make clear, that while this may SEEM like a negative critique it is indeed not, I'm pleased with my puchase, and would recommend the product. but I also think it's only fair to provide an accurate description of just what the user is in for. While the Vimax/JES will work (and perform?) as advertised, it seems some individauls will need to attune it a bit to their own comfort levels.
PS. I have several feet of tubing left over from the Ring of Power I built, and I think that tubing will fit nicely over the firmer tubing of the noose, it won't fit over the noose AND through the holes so I'm going to try two things...
1. cutting a strip to fit just around the top half of my head (where the discomfort is) and,
2. making a new noose entirely of the wider softer stretchier (rubber? silicon?) tubing.
. I'll post again in a few days with the results
. I just got my Vimax/JES yesterday. I'm temporarily tearing down walls at work and aren't interested in testing their warnings against wearing while in danger of slips/falls. So I'm only wearing it in the evenings. I can tell you all this;
. the noose IS uncomfortable, I'm circumsized so slipped it between the head and scar. puuled the noose thight and started cranking up the pressure. perhaps i went a bit too far, but the noose pinched quite a bit, biting into the Oh so tender skin behind the head.
. After a few hours I had to use the (beginning users) foam ring, which ripped through while trying to stretch it to fit over my head (YES, the little one!). It was actually easier to put on that way and position under the noose and made it much less painfull. I was able to continue using the stretcher for another 3-4 hours.
. Tonite I decided to try a bit of modification. For comforts sake I pulled my shaft skin up to protect that skin just behind the head - I don't know if all cicumsized men can do this, while i have no foreskin, my shaft skin is pretty loose and when flacid comes right up to the edge of the head protecting that pink skin. so this may not be a viable option for some (personally I'm hoping it may help with some foreskin restoration, I tried a TLC tugger but couldn't even get it on!). Anyway I wore it that way for about 2½ hours before the pinching bacame too much to take any further.
. I'm cooling off for a couple mins before I try again with that foam ring.
. I've already learned a couple things.
1. The noose does NOT have to be extremely tight, at first I put a death grip on my poor head! That didn't last long, got cold and VERY dark purple. Loosening the noose a bit I found it much more bearable but not comfortable, the foam ring REALLY helps.
. 2. Pulling up the skin is more comfortable and I'm goin to try that with the foam ring. I also pulled the noose TOO tight again and am going to try to remember to keep it looser, though one's instinct is to crank it down and go for maximum stretch.
. In response to KindD's repeated request for a different head assembly;
I don't see why you can use a wider strip of soft cloth or leather with the head assembly, or even fold a strip of wash cloth and place it under the noose (as I'm planing to try in a few days if this discomfort persists.
Finally, I'd like to make clear, that while this may SEEM like a negative critique it is indeed not, I'm pleased with my puchase, and would recommend the product. but I also think it's only fair to provide an accurate description of just what the user is in for. While the Vimax/JES will work (and perform?) as advertised, it seems some individauls will need to attune it a bit to their own comfort levels.
PS. I have several feet of tubing left over from the Ring of Power I built, and I think that tubing will fit nicely over the firmer tubing of the noose, it won't fit over the noose AND through the holes so I'm going to try two things...
1. cutting a strip to fit just around the top half of my head (where the discomfort is) and,
2. making a new noose entirely of the wider softer stretchier (rubber? silicon?) tubing.
. I'll post again in a few days with the results
- Joined
- Jun 20, 2003
- Messages
- 3,707
Fillerup said:
Nah. Glad you were unable to unload it. So many men would be hesitant to buy something that has been used by someone else.
- Joined
- Jun 20, 2003
- Messages
- 3,707
Fillerup said:Soap and water. Marvelous stuff! Hydrogen Pyroxide and a pressure washer if you're really freaked LOL.
Yeah, it's more of a mental thing than a hygeine thing.
- Joined
- Jun 28, 2003
- Messages
- 872
Yo Gimme9!! The difference in the way your head is secured to the surface is like night and day between the two head attachment parts yo! Look at it like this, would you choke your neck and pull at your head upwards with the same hand your choking yourself with. HELL NO!! That's the same techniqe used to hang people, meaning if there is enough tension the lose of circulation and sensation to the head is possible. Now the head attachment part that I'm looking for has a wide strap(no wrap needed) and wider spaced holes that secure the strap to the head part surface. Plus with my experiences with the extender, I have found that with my job( alot of lifting,bending down, and movements in akward stretching type positions) that the two ends that hold the srap in place tend to press against my leg while I'm moving, resulting in the noose coming loose. The part I'm going to get will eliminate this problem for me. Holla Back!!
