Phallson Forte home made for people on a budget - Need some idea.

[CokeCanCock]

I came across this link, after looking at a Phallson [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Forte[/words]. Now I like the idea of the Phallson [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Forte[/words] as you can wear it all day. But the concept is far to simple to sell at that price and its a down right rip off. So I did some brain storming.

Untitled Document

Basically following this concept ^ I used an old cock sleeve I had that the girlfriend hated in use as the rubber sleeve. This is the exact one, any rubber cylinder will do just make sure its big enough to be tight. I imagine the finger of a rubber glove would suffice.

Lovehoney BASICS Textured Penis Enhancer Sleeve | Penis Sleeves & Extensions | Lovehoney

Then after that I used the Cap for some washing detergent.


Then just attach some string, rope, clothe or whatever to use as the belt attachment. I will be adding to this design over time and replace. You could do this a thousand ways, using house hold items. The Phallson is to simple for the price imo. I'll be trying this out for a few days then report back.



Simple to do.

 

[BigBeardBig]

I think the best idea is to save some money for the real thing.
I get your on a budget and the ideas you present sounds all cool, but.. please dont hurt yourself bro.

 

[CokeCanCock]

I think the best idea is to save some money for the real thing.
I get your on a budget and the ideas you present sounds all cool, but.. please dont hurt yourself bro.

It's not going to be in my budget for a long time, may go with Size Matters but it's either Size Matters or a Pump. I think replicating the head of Size Matters will be the safest.

 

[CokeCanCock]

Here is the idea I have in mind, I think any curved piece of plastic, I already have rubber string like that is pictured.

 

[CokeCanCock]

Right, problem solved, replicated the vaccum attachment, works great, this will do till I find a replacement with a hook, for now going to use tape.

 

[CokeCanCock]

Woo, now I have a make shift Phallson!

 

[BigBeardBig]

Looks OK I guess, but I wouldnt sleep with this bro, careful.
Could be very useful for healing and passive gains.

 

[CokeCanCock]

Looks OK I guess, but I wouldnt sleep with this bro, careful.
Could be very useful for healing and passive gains.

No definitely not going to sleep in it. It works just like a vac-hanger. Feels perfectly safe. Just going to wear it whilst doing work.

 

[acromegaly]

i used a big bicycle lock for an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] for a while it worked pretty good. i got too thick though and cant squeeze into it. now i just pull it down and sit on it for a stretch. look up dld's thread on lazy ass stretches.
even a plain [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]UJW[/words] or cock ring can help between workouts.

 

[CokeCanCock]

i used a big bicycle lock for an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] for a while it worked pretty good. i got too thick though and cant squeeze into it. now i just pull it down and sit on it for a stretch. look up dld's thread on lazy ass stretches.
even a plain [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]UJW[/words] or cock ring can help between workouts.

Can you explain how you did the bicycle lock thing?

- - - Updated - - -

Looks OK I guess, but I wouldnt sleep with this bro, careful.
Could be very useful for healing and passive gains.

Hey not about aesthetics, Just used it for hanging and worked great.

 

[Nolove]

i used a big bicycle lock for an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] for a while it worked pretty good. i got too thick though and cant squeeze into it. now i just pull it down and sit on it for a stretch. look up dld's thread on lazy ass stretches.
even a plain [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]UJW[/words] or cock ring can help between workouts.

Yep, I did it with a masterlock, felt weird with with all the banging around though.

 

[CokeCanCock]

Yep, I did it with a masterlock, felt weird with with all the banging around though.

How are you doing this exactly?

 

[acromegaly]

How are you doing this exactly?

looked like this, maybe a little bigger?

you can use sports prewrap and tape to adjust the inside circumference if you need it to fit more snugly...
the idea is to just wear something that keeps you extended and is comfy enough that you can wear it all day, basically one to two hours straight from one bathroom break to another.
its a very old concept i guess tribes in africa do similar hanging and even in ancient asia.
Finding a good all day stretch can make a big difference. also I really think full package stretches and light pumping can help bring out your inner hang down lol

 

[CokeCanCock]

Just bought a one way valve and some fish tank pipe. Also got some replacement silicone for the rubber sleeve, going to bring back a tie one I go home. Then run the pipe under the rubber, suck the air out, Wah-lah I have my very own fully working replica of the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] and Vac-U-hanger! All for the price of $6!

- - - Updated - - -

Might make an instructional video once the stuff arrives

 

[acromegaly]

good luck, these things can take a lot of trial and error sometimes

 

[CokeCanCock]

good luck, these things can take a lot of trial and error sometimes

Thanks, the Vac-Hanger is very easy to replicate with day to day items. Even the one I made today was solid.

 

[DLD]

Here is a tutorial on how to create a Lock Hanging Setup

DLD Ghetto Lock Hanging Thread

 

[eugine8plz]

Where did you get the vac cup where you insert your glans for this diy PF??

 

[runningignus]

Simple DIY project if you go to Menards or Lowe's or home depot. Plungers place has a member that did a good write up on a simple vac hanger that he made with a silicone sleeve and pvc pipe end cap. Looked good. The caps are cheap and you just have to find your size. Just don't pull your dick out in the store, measure at home lol.

 

[eugine8plz]

Simple DIY project if you go to Menards or Lowe's or home depot. Plungers place has a member that did a good write up on a simple vac hanger that he made with a silicone sleeve and pvc pipe end cap. Looked good. The caps are cheap and you just have to find your size. Just don't pull your dick out in the store, measure at home lol.

Hahaha you don't have to tell me twice lol. Should I measure both the girth and length on my flaccid glans? How big should it be compared to my glans?

 

[CokeCanCock]

Simple DIY project if you go to Menards or Lowe's or home depot. Plungers place has a member that did a good write up on a simple vac hanger that he made with a silicone sleeve and pvc pipe end cap. Looked good. The caps are cheap and you just have to find your size. Just don't pull your dick out in the store, measure at home lol.

what are the caps called? can you send the link?

 

[johnny-wang]

what are the caps called? can you send the link?

Yup link will be mighty cool

 

[runningignus]

Tried but can't find the thread.
Google "clear pvc pipe cap" and it'll show you. Measure your flaccid girth and try to find one close or just over or get a few in case you grow or need the space. Cheap pieces but add up if not paying attention. Make 2 or 3 holes, for the hanger attachment and the release valve. You can even not use a valve and just push the glans in and put a piece of tape. It'll hold. Need a sleeve though. Then your done. Very simple device.

 

[CokeCanCock]

Tried but can't find the thread.
Google "clear pvc pipe cap" and it'll show you. Measure your flaccid girth and try to find one close or just over or get a few in case you grow or need the space. Cheap pieces but add up if not paying attention. Make 2 or 3 holes, for the hanger attachment and the release valve. You can even not use a valve and just push the glans in and put a piece of tape. It'll hold. Need a sleeve though. Then your done. Very simple device.

how did he keep the hole air tight? Also do you know if theres a piece of hardware similar to the cylinder provided in the link

Autoextender Penis Enlargement Device

 

[CokeCanCock]

A little updates - i've ordered some rubber and plastic caps and EPDM Caps. I may order some rubber chair feet, they look like they may a good alternative. Another option is buy a acrylic pump custom to size the drill a hole in it and put a hook in. When they arrive my plan is to put a female coupling in to attach the pump. Then put a hook bolt in. Not sure whether to thread the hole or bolt it with a rubber washer would be best to keep it air tight. Then for added air rightness and so my penis doesn't touch the bolt i'm going to fill the bottom with caulk or some form of putty this will hopefully make it comfortable for my penis and make everything nice and air tight. To prevent blisters my plan is to line it with neoprene which can gradually be removed as my flaccid girth increases, put a sleeve of silicone over my penis its self, and maybe bandage and tape.

 

[acromegaly]

Use epoxy glue around all of the seals. Sounds good I only wonder if it will stick out in your pants hopefully not

 

[CokeCanCock]

Use epoxy glue around all of the seals. Sounds good I only wonder if it will stick out in your pants hopefully not

I think in genes I might be safe, I'll look into epoxy, this should work well, Just need to get access to a drill. If I had access to a pillar drill i'd make the dome my self.

 

[runningignus]

Even a simple hand file will do. Get something sharp to poke through, enlarge and then tap if using a valve. The epoxy will work fine for bonding and look for a kind that you can file.

 

[CokeCanCock]

Sent some sketches into a designer just now, hopefully they reply with good news, may be able to get a custom dome made for pretty cheap. If the price is too high, i'll just buy a pillar drill and make it my self out of an acrylic pipe.

 

[DLD]

Sent some sketches into a designer just now, hopefully they reply with good news, may be able to get a custom dome made for pretty cheap. If the price is too high, i'll just buy a pillar drill and make it my self out of an acrylic pipe.

I admire your creativity but I would definitely get the real [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] when you can. maybe even win it in the monthly contest.

 

[CokeCanCock]

I admire your creativity but I would definitely get the real [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] when you can. maybe even win it in the monthly contest.

When the funds permit, as a student I have to make do with what I can at the moment.

 

[DLD]

When the funds permit, as a student I have to make do with what I can at the moment.

I understand but you are making some good headway in the Feb contest, perhaps this will be the real you need.

 

[CokeCanCock]

I understand but you are making some good headway in the Feb contest, perhaps this will be the real you need.

Yeah i'm going to do the best I can!