Am I too small for Size Genetics?

A

ArchieBear

0
I bought the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size Genetics[/words] machine a few months back and had a lot of problems with keeping the contraption on. It kept slipping off.
Now, I am an unfortunately under-endowed man of 2.5 flaccid and 3.5 erect, so I'm wondering if this is the cause.
I used the shortest settings, and have tightened as much as I could without too much discomfort (even having to keep adjusting since it kept pinching me as I tightened), but in the end, it always slips out. I've picked it up again now that I have some more free time from my hectic schedule to find I'm having the same problems. Any tips would be welcomed as all the ones I've searched and tried haven't resulted in much luck.

Thanks in advance!
 
first off you need to warm up before its use
second do jelqin excercise dont rough it keep it to 50 reps
third once blood flowed to penis warm down strap on Penis Enlargement with a wrap every 15 minutes take off and let the blood breathe for 3 minutes do some jelqin in between 20 reps its not going to be over night results
im ED with mine hidden in my fat pad i got blood back and its been 2 weeks in a half
the major part of Penis Enlargement is to get your blood flowing more this helps increase your penis over time
the wraps for me make my ding go cold and purple too dangerous for me but i found my own way
to keep it stretched with out wrap
a little weight at the end of penis not much just to keep the stretch down
this is my suggestion if you want to try its up to you
 
ArchieBear;523002 said:
I bought the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size Genetics[/words] machine a few months back and had a lot of problems with keeping the contraption on. It kept slipping off.
Now, I am an unfortunately under-endowed man of 2.5 flaccid and 3.5 erect, so I'm wondering if this is the cause.
I used the shortest settings, and have tightened as much as I could without too much discomfort (even having to keep adjusting since it kept pinching me as I tightened), but in the end, it always slips out. I've picked it up again now that I have some more free time from my hectic schedule to find I'm having the same problems. Any tips would be welcomed as all the ones I've searched and tried haven't resulted in much luck.

Thanks in advance!
Click to expand...

forgot one thing i do diff from most Penis Enlargement'ers
when im strapped in to the Penis Enlargement i stimulate the penis shaft just enough to get blood in it to expand a semi flaccid but never errect
squeeze shaft at 5 second intervals working from bottom to head using first finger and thumb
blood flow is so critical and this in the medical world it important to expand
 
The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] will take a penis, fully stretched that is 3" or greater. We tested this in Florida and shot a video.
 
You probably just need to wrap a good sized layer of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] around jet under your glans. This will make you thicker and keep slippage from happening. It's probably a girth issue not length
 
My problem is that I do not expect overnight results. My problem is that it won't stay on. The only way for me to make it stay is to have myself erect, which is not advised and slips out when soft. With semi-erect it still sips out or I have to tighten it to an extent that is too painful.

I too have seen a "smaller" version of some sort for an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] when I was first doing research, but the reviews were never as good as for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] ones. I'm weary on buying another contraption to have it gone to waste.
 
ArchieBear;523176 said:
My problem is that I do not expect overnight results. My problem is that it won't stay on. The only way for me to make it stay is to have myself erect, which is not advised and slips out when soft. With semi-erect it still sips out or I have to tighten it to an extent that is too painful.

I too have seen a "smaller" version of some sort for an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] when I was first doing research, but the reviews were never as good as for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] ones. I'm weary on buying another contraption to have it gone to waste.
Click to expand...

My problem is not***

hepcat;523177 said:
It may be worth it to use the smaller one for now. You'll still have the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] waiting for you when you outgrow the smaller model. Good luck to you sir!
Click to expand...

Thanks, although I probably won't be spending more money on a smaller contraption. Not worth the amount of money spent for the risk of disappointment. I'm not much of a gambler =P.
 
with your jelqin try to add a little more force head should swell better but do in shower once it starts to roll out finish that routine and move to Penis Enlargement
the noose on your Penis Enlargement needs an adjustment i had to improvise mine 1inch turtle almost hidden got mine to stretch out i have ED i didnt expect results in 2 weeks but blood flow
is most important i changed the noose to a 1 inch fat shoe lace and cord lock since it was small i kept working tension pulling it to end till it slid over the front plate of Penis Enlargement
once it made its way on the plate i introduced it to lock weight just a normal master lock its in my journal if ya want to check out http://www.mattersofsize.com/forum/showthread.php?69392-Jelqin-Newbie-here-My-first-time-experience i keep things light but work in sets during the day ive got blood back just training it now to keep the blood
 
If you can put it on and it comes off then you are either not wrapping or wrapping wrong. You can't just throw your bare dick in it. You need to put the foam cylinder on then wrap a foot long piece of 2 inch wide self adhesive bandage around it then tighten the comfort strap on it. If you do this there is no chance of slippage. And be flacI'd when you do this and stretch your penis out as far as possible while compressing the springs of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sg[/words] down
 
Jdcsd;523334 said:
If you can put it on and it comes off then you are either not wrapping or wrapping wrong. You can't just throw your bare dick in it. You need to put the foam cylinder on then wrap a foot long piece of 2 inch wide self adhesive bandage around it then tighten the comfort strap on it. If you do this there is no chance of slippage. And be flacI'd when you do this and stretch your penis out as far as possible while compressing the springs of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sg[/words] down
Click to expand...

No, I am not sticking it in bare, so apparently there is a chance. I have followed the instructions, and used all possible combinations of the pieces that come with it, and even with it, tightening with any of the various tighteners end up all pinching the foam and me, making it very uncomfortable, which results in me adjusted the pieces several times while tightening, all to have myself slip out a few minutes later.
 
ArchieBear;523378 said:
Yup tried that, tried all combinations. Using all three hurts me more though due to the discomfort.
Click to expand...

you need to give time to heal if your hurting down there i use [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] wrap on mine but dont put the bandage on tight this is probably where your pain is coming from i too
once put on too tight and when i finished a 15 minutes set to relax the penis it felt like it went threw a grinder so i loosened it and gave a some breathing room lol
 
Are you using an [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] wrap? I use that and the foam cylinder and have no slippage at all. Or get the [words=http://TLCTugger.com/MOS]tugger[/words] like dld said
 
why dont you try jelqing or follow the dld [words=http://www.mattersofsize.com/forum/penis-enlargement-newbie-forum/1597-dlds-first-routine-i-gained-2-inches-with-this-routine-full-tutorial.html]newbie routine[/words] first for a few months. after you have gain the length, then only you use any device you want to use. one step at a time. dont rush it.
 
It will definitely take your size but understand that there is an art to using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words], once you receive you will want to practice with different wraps and attachments to find what you like best but I am highly advocating for the [words=http://TLCTugger.com/MOS]Tugger[/words], it makes the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] perfect.
 
holy_heXor;523607 said:
why dont you try jelqing or follow the dld [words=http://www.mattersofsize.com/forum/penis-enlargement-newbie-forum/1597-dlds-first-routine-i-gained-2-inches-with-this-routine-full-tutorial.html]newbie routine[/words] first for a few months. after you have gain the length, then only you use any device you want to use. one step at a time. dont rush it.
Click to expand...

This.
 
Oh sorry :blush: DLD I know how you hate messages like that I forgot, it's been a while I've been here. How are you doing by the way? I was agreeing with holy_heXor's post about doing some manual Penis Enlargement first to gain some and then strap on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words].
 
I know I am kinda late to this discussion, but if you think you might be to small you can try the x4 Labs [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] instead man they have a mini edition that costs like 60 bucks extra. Its designed for people with a smaller starting size, but it still extends to the full 9 inches. Obviously its kinda shitty it costs more but its better than waiting to get started on your routine. The x4 [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] is pretty nice too.
 
Jdcsd;523138 said:
You probably just need to wrap a good sized layer of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] around jet under your glans. This will make you thicker and keep slippage from happening. It's probably a girth issue not length
Click to expand...


Thanks. I'm going to try this as I am having the same issue and I am not that small.
 
Sometimes extending takes a bit of education and practice to get right but it is definitely worth the investment of time. Learning to wrap right or finding the perfect attachment can take time and should be invested as the gain potentials with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] are amazing.
 
You must log in or register to reply here.
Back
Top