forced to upgrade? (warning: graphic details)

Chaoskampf · Jun 16, 2018

Big Schwanz Acht;761634 said:
it's just plastic, so depending upon where it cracked it shouldn't be too tough to repair. I know I'd miss my X40 and I only use my Goliath about 10% of the time

Why would the X40 be better?

Big Schwanz Acht · Jun 16, 2018

Chaoskampf;761651 said:
Why would the X40 be better?

Just my preference...I like packing the cylinder and feeling the pressure forcing length and I get much less FR. After using The Goliath, I come-out looking like a Dachshund, lol

Chaoskampf · Jun 16, 2018

Big Schwanz Acht;761652 said:
Just my preference...I like packing the cylinder and feeling the pressure forcing length and I get much less FR. After using The Goliath, I come-out looking like a Dachshund, lol

Nice to see your use of German words. Do you have a German background or where does this come from?

I never really packed anything but just went up in cylinder diameter because I felt the need to give the base more space once just the base packed the bottom of the cylinder.

But in general I don't think anyone will ever pack the Goliath midshaft.

Big Schwanz Acht · Jun 16, 2018

1/4 German (my username is a slight homage to that)

try packing a smaller tube and see if you like it (it does take a bit of getting used to, tho)

Chaoskampf · Jun 16, 2018

Big Schwanz Acht;761654 said:
1/4 German (my username is a slight homage to that)

try packing a smaller tube and see if you like it (it does take a bit of getting used to, tho)

Nice bro.

The funny thing is that I don't even pack the smallest cylinder I have (the Utimi to the right of my picture that I uploaded earlier in this thread).

I don't know how this works but I went up in cylinder sizes throughout my pumping career but when I go back to the Utimi the expansion looks the same as during my very first pumping session. Let's me doubt my supposed gains of course. Maybe the entry diameter of that cylinder is just too small to allow the base to fully spread. Anyway the Utimi is just too uncomfortable due to the small cross section of the flange. I pump shaft only with Goliath and full package with the Long Jonny. The 'sack' / scrotum is about to blow up afterwards though. I don't know what is expanding inside, can't be the balls.

Chaoskampf · Jun 16, 2018

Big Schwanz Acht;761654 said:
1/4 German (my username is a slight homage to that)

20 Zentimeter - Frenzy Blitz (official music video) - originally from Möhre

https://www.youtube.com/watch?v=iVqoQW3svx8

Translation:

20 cm - 8 inches

that is never 20 cm
never ever little peter
in reality 20 cm are much larger

forget it
really you must have measured the wrong way
plain and simple
from shortys I will run

20 cm
not now nor later
admit it
it is easy to overlook

brevity is the soul of wit
but I like it long and girthy
you however fell short
no chance for a flirt

just forget it
you must have measured wrongly
I know it is mean
it is small and it is yours

if you turn up with miss boner
at my door at nighttime
then we take your ruler
and measure once more

17 are okay (6.75")
18 don't hurt (7")
19 I find beautiful (7.5")
20 if they stand strong (8")

huge-girth · Jun 17, 2018

Chaoskampf;761653 said:
Nice to see your use of German words. Do you have a German background or where does this come from?

I never really packed anything but just went up in cylinder diameter because I felt the need to give the base more space once just the base packed the bottom of the cylinder.

But in general I don't think anyone will ever pack the Goliath midshaft.

The last few times I used the X40, I was having gaiter bite. Do you think it's wise for me to move to the X50 extreme?

huge-girth · Jun 17, 2018

acromegaly;761643 said:
The valve part between the end cap and the pump cracks eventually from everyday pumping and pressure. It happens to all pumps not just bath mate

- - - Updated - - -

I’m doing longjonny cock only right now it’s really weird but getting the job done for now I guess

But my pumps are not currently in use at the moment. Should I expect a life expectancy of 2 years for the X40?

cladre60 · Jun 17, 2018

Chaoskampf;761656 said:
20 Zentimeter - Frenzy Blitz (official music video) - originally from Möhre

https://www.youtube.com/watch?v=iVqoQW3svx8

Translation:

20 cm - 8 inches

that is never 20 cm
never ever little peter
in reality 20 cm are much larger

forget it
really you must have measured the wrong way
plain and simple
from shortys I will run

20 cm
not now nor later
admit it
it is easy to overlook

brevity is the soul of wit
but I like it long and girthy
you however fell short
no chance for a flirt

just forget it
you must have measured wrongly
I know it is mean
it is small and it is yours

if you turn up with miss boner
at my door at nighttime
then we take your ruler
and measure once more

17 are okay (6.75")
18 don't hurt (7")
19 I find beautiful (7.5")
20 if they stand strong (8")

Oh, 6.75" is just okay? I'm currently 6.375" and I'd have her choking and begging me to stop with that. Dumb hoe probably has an 8" dildo and doesn't take into account that she's holding on to 3-4" of it while fucking herself.

Maybe that's what the song is about, an homage to her dildo collection. Any chick listening to that song and believing it is in for a big shock if she ever comes across an 8" dick.

huge-girth · Jun 17, 2018

Chaoskampf;761655 said:
Nice bro.

The funny thing is that I don't even pack the smallest cylinder I have (the Utimi to the right of my picture that I uploaded earlier in this thread).

I don't know how this works but I went up in cylinder sizes throughout my pumping career but when I go back to the Utimi the expansion looks the same as during my very first pumping session. Let's me doubt my supposed gains of course. Maybe the entry diameter of that cylinder is just too small to allow the base to fully spread. Anyway the Utimi is just too uncomfortable due to the small cross section of the flange. I pump shaft only with Goliath and full package with the Long Jonny. The 'sack' / scrotum is about to blow up afterwards though. I don't know what is expanding inside, can't be the balls.

How long have you been pumping? When you say your scrotum is about to blow up, do you mean you put your balls inside the Goliath while pumping?

Chaoskampf · Jun 17, 2018

huge-girth;761677 said:
How long have you been pumping? When you say your scrotum is about to blow up, do you mean you put your balls inside the Goliath while pumping?

Pumping for roughly one year. The Goliath is too small to pump both shaft and balls. Works but too painful. But if I put both in I will reach until the 22cm mark. When the balls are outside I usually stop at the 21cm marking.

As you can imagine if you have a cylinder that is 4" wide you can insert both shaft and balls. Now the scrotum expands to 31.7cm diameter.

Circumference of a circle = pi * diameter = 3.142 * 4" = 12.5" = 31.7cm

Chaoskampf · Jun 17, 2018

cladre60;761675 said:
Oh, 6.75" is just okay? I'm currently 6.375" and I'd have her choking and begging me to stop with that. Dumb hoe probably has an 8" dildo and doesn't take into account that she's holding on to 3-4" of it while fucking herself.

Maybe that's what the song is about, an homage to her dildo collection. Any chick listening to that song and believing it is in for a big shock if she ever comes across an 8" dick.

No man. It is more of a provocation. In the metric system the 20cm is the best of the best. Unfortunately nobody has this size. 20cm is the unthinkable for normal people.

This song is used on traditional binge drinking festivals.

Chaoskampf · Jun 17, 2018

huge-girth;761673 said:
The last few times I used the X40, I was having gaiter bite. Do you think it's wise for me to move to the X50 extreme?

Yes sir.

X40 is 7.06" circumference
X50 is 7.85" circumference

acromegaly · Jun 17, 2018

huge-girth;761674 said:
But my pumps are not currently in use at the moment. Should I expect a life expectancy of 2 years for the X40?

Yes about

cladre60 · Jun 18, 2018

Chaoskampf;761705 said:
No man. It is more of a provocation. In the metric system the 20cm is the best of the best. Unfortunately nobody has this size. 20cm is the unthinkable for normal people.

This song is used on traditional binge drinking festivals.

But she is singing about penis size right?

I'd still destroy her vagina just for fun.

huge-girth · Jun 18, 2018

Chaoskampf;761706 said:
Yes sir.

X40 is 7.06" circumference
X50 is 7.85" circumference

Interesting, so maxing out the X50 in girth will take me to 7.5 inches mid shaft? Or is it more than that?

huge-girth · Jun 18, 2018

acromegaly;761708 said:
Yes about

I've decided to just upgrade to the X50 without wasting time. I will start using the X50 from January no doubt about that.

DLD · Jun 18, 2018

huge-girth;761740 said:
I've decided to just upgrade to the X50 without wasting time. I will start using the X50 from January no doubt about that.

7 months planing! That is some long term commitment!

Chaoskampf · Jun 18, 2018

huge-girth;761739 said:
Interesting, so maxing out the X50 in girth will take me to 7.5 inches mid shaft? Or is it more than that?

Yes. Even more would be possible. 7.85" the absolute limit. However maybe your base girth increases faster and then you might get a problem with gaiter bite again. But I have never seen anybody packing the XXL Bathmates midshaft.

huge-girth · Jun 19, 2018

Chaoskampf;761844 said:
Yes. Even more would be possible. 7.85" the absolute limit. However maybe your base girth increases faster and then you might get a problem with gaiter bite again. But I have never seen anybody packing the XXL Bathmates midshaft.

But even if I get gaiter bite with the X50 I can still continue using it until my midshaft max out the tube right? And same applies for the X40 right?

forced to upgrade? (warning: graphic details)

0

@Big Schwanz Acht

0

@Big Schwanz Acht

0

0

Moderator

Moderator

0

Moderator

0

0

0

0

0

Moderator

Moderator

doublelongdaddy

0

Attachments

Moderator

Similar threads