There has been some talk in the past about the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words], available at [words=http://TLCTugger.com/MOS]tlctugger[/words].com, e.g. by Supra, Gomer_pyle, Millonman.
The [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] is an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] device, which in my opinion is useful especially when combined with the exercises provided by mattersofsize.
I have been using the [words=http://TLCTugger.com/MOS]VLC[/words] for several months, but I have a concern that it was not providing enough tension to have much effect. The original version of this product, the [words=http://TLCTugger.com/MOS]TLC[/words], was intended for foreskin restoration and is very effective at doing that - I have used it myself and certainly grown my foresking. The [words=http://TLCTugger.com/MOS]VLC[/words] is aimed mainly at shaft lengthening (assuming for the moment that it works). However the shaft is several times thicker than the foreskin on its own, so it is logical that it would take alot more tension to actually help. OK, so alot of what you would want from an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] is simply to maintain stretch following manual exercises, however I would rather have more tension if it provides further benefits.
So I set about looking at how to increase the tension being applied to the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] handle.
After several experiments that did not work too well, I found that there is a very simple method using the straps provided with the [words=http://TLCTugger.com/MOS]VLC[/words]. The "usual" technique, which is perfectly adequate when performing foreskin restoration alone, is to anchor the elastic strap using a safety pin. This is fine for that scenario but when upping the tension, the safety pin becomes a weak point. So all I did was to remove the anchor, and attach the second clip to the bar just below the clip attached to the tugging handle - see picture attached. Using this technique, I can get tension in excess of 2kg - probably alot more, as there is tension from one single strap and one double strap - I intend to measure it properly shortly. I have used this method for a couple of weeks now and wow, does it provide a strong tug!
I have seem some posts previously about problems with keeping the [words=http://TLCTugger.com/MOS]VLC[/words] on. I must admit that I had this problem at first. However, I think the trick to this is to do some foreskin restoration first - not necessarily that much, for those who do not want loads more foreskin. This then provides more slack skin to insert into the [words=http://TLCTugger.com/MOS]VLC[/words], thus making a better vacuum seal around the glans and therefore providing a stronger tug on the shaft. Since growing more skin, I do not have a problem with the [words=http://TLCTugger.com/MOS]VLC[/words] coming off, provided I put it on properly. I now find that after using it for two hours or more, when taking it off the area at the end of the glans where the [words=http://TLCTugger.com/MOS]VLC[/words] was resting is raised up as if it has been pulled - there was always a small effect like this but nothing like it is now.
Anyway I would be interested to hear if anyone tries this and feels it is useful.
I would add that I am aware there other ADSs out there - some of which I have tried, I think the thing to do is fine something that works for you. The [words=http://TLCTugger.com/MOS]VLC[/words] so simple (once you are used to it) and cheap that for me it is very useful.
The [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] is an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] device, which in my opinion is useful especially when combined with the exercises provided by mattersofsize.
I have been using the [words=http://TLCTugger.com/MOS]VLC[/words] for several months, but I have a concern that it was not providing enough tension to have much effect. The original version of this product, the [words=http://TLCTugger.com/MOS]TLC[/words], was intended for foreskin restoration and is very effective at doing that - I have used it myself and certainly grown my foresking. The [words=http://TLCTugger.com/MOS]VLC[/words] is aimed mainly at shaft lengthening (assuming for the moment that it works). However the shaft is several times thicker than the foreskin on its own, so it is logical that it would take alot more tension to actually help. OK, so alot of what you would want from an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] is simply to maintain stretch following manual exercises, however I would rather have more tension if it provides further benefits.
So I set about looking at how to increase the tension being applied to the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] handle.
After several experiments that did not work too well, I found that there is a very simple method using the straps provided with the [words=http://TLCTugger.com/MOS]VLC[/words]. The "usual" technique, which is perfectly adequate when performing foreskin restoration alone, is to anchor the elastic strap using a safety pin. This is fine for that scenario but when upping the tension, the safety pin becomes a weak point. So all I did was to remove the anchor, and attach the second clip to the bar just below the clip attached to the tugging handle - see picture attached. Using this technique, I can get tension in excess of 2kg - probably alot more, as there is tension from one single strap and one double strap - I intend to measure it properly shortly. I have used this method for a couple of weeks now and wow, does it provide a strong tug!
I have seem some posts previously about problems with keeping the [words=http://TLCTugger.com/MOS]VLC[/words] on. I must admit that I had this problem at first. However, I think the trick to this is to do some foreskin restoration first - not necessarily that much, for those who do not want loads more foreskin. This then provides more slack skin to insert into the [words=http://TLCTugger.com/MOS]VLC[/words], thus making a better vacuum seal around the glans and therefore providing a stronger tug on the shaft. Since growing more skin, I do not have a problem with the [words=http://TLCTugger.com/MOS]VLC[/words] coming off, provided I put it on properly. I now find that after using it for two hours or more, when taking it off the area at the end of the glans where the [words=http://TLCTugger.com/MOS]VLC[/words] was resting is raised up as if it has been pulled - there was always a small effect like this but nothing like it is now.
Anyway I would be interested to hear if anyone tries this and feels it is useful.
I would add that I am aware there other ADSs out there - some of which I have tried, I think the thing to do is fine something that works for you. The [words=http://TLCTugger.com/MOS]VLC[/words] so simple (once you are used to it) and cheap that for me it is very useful.
