Question About Heavy Duty Static Stretcher

S

stevie7inch

0
Hey folks,

When I wear my Heavy Duty Static Stretcher (HDSS) I place the top of my penis against the ceiling of the dome, put the black circle in, and stretch. I have been stretching for a while now and at no time have I felt my ligs exhaust (very tight ligs and high LOT). So I have been using the 5 pound springs and, when I stretch to capacity, my head edges down away from the ceiling of the dome. I get a great stretch but is the pulling away from the dome supposed to be happening and, if not, does it affect my workout and how do I prevent it?

Cheers!
 
MoreGains123;337007 said:
You need to expel some more air. Try pushing the glans in deeply and "burping" the dome. Are you preparing the glans correctly?
Click to expand...

MOREGAINS!

Thanks buddy! It's your HD workout that I've been doing. I'm using the max weight springs and STILL, STILL have not felt that deep fatigue after many days.

I ALWAYS put on the tape over my glans like they show on the video. ALWAYS! I put my head in the dome, pull the rubber over the shaft and stretch and back up and do all I can to get to the top of the dome. Once there, I push my flaccid cock into my body so that the head is pushing against the dome ceiling, put in the black circle and walla.

1. IS there a way, right before I put in the black circle, to make sure all air is expelled?
2. What is BURPING?

I trust you implicitly. Just tell me what to do! I love the stretcher and I want to master it!

All the best,

Stevie

PS: Now I'm beginning to think that I have really not been getting the FULL 11 POUNDS WHEN STRETCHING TO CAPACITY, which is when the head shrinks back from the dome ceiling!
 
I wouldn't try 11 pounds until you've mastered it. What I do is push the glans into the dome with several different techniques such that I'm certain all possible air has been expelled. While wearing I will take the dome off the rods and check that no air has accumulated while wearing. (This seems to happen due to all the air eventually being dragged to the tip of the dome.) These checks don't always result in any air being released but sometimes it's a very slight burp. If you put a dab of vaseline on the plug it'll stay while you burp the dome.

To reiterate, I put on the dome/sleeve by putting my taped glans into the dome (with the sleeve rolled onto the dome) by forcing it into the dome. (I also lightly vaseline my shaft.) As I see the glans is in as deep as possible and pressing against the dome, I flip the sleeve off the dome such that I know it'll seal. At this point, while forcing the glans in, I place the plug. I then roll the sleeve down the rest of the way. Then I work the shaft toward the dome with one hand, while holding the dome with the other. Since the plug is held by a dab of vaseline it stays in place but I can hear an air burp. Before releasing the pushing, I press the plug down (to be certain the plug isn't up and allowing air in). Then I put on the base/rod assembly and fit the dome onto it. I wrap the whole thing in a rice sock for as long as is convenient.

I do not over extend the weight. I start with the 3 lb springs at 50%. This is a total of 3 lbs (3 lbs x 2 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x 50[/words]% = 3 lbs). As the heat and relaxation go to work, I increase the spring tension. Using the full 11 lbs will cause fatigue if you're doing it for any amount of time, but at your level I'd predict injury before fatigue. Fatigue will set in using 5 lbs for a couple of hours continuous over the course of a week or two: or something is being done right.
 
Last edited:
Hey MOREGAINS,

Thanks every time for stepping up and caring enough to take the time to help me!

To address the three paragraphs above one by one:

PAR 1: *I only went that high up that quickly because I wasn't feeling fatigue at the lower weights doing 2 hours a day on them. Maybe I was impatient. Keep in mind that I was following your "ONLY HD for 3 hours a day" plan (HIGH Weight then lower the stretch for riding out the fatigue). I don't remember if my head was being pulled away from the ceiling before at much lower weight and, at no time, was I ever able to see the springs FULLY COMPRESSED (disappearing because they are compressed so much, get it?). I guess what I'm asking is this (in relation to PAR 1): could it be possible that I am totally getting it in right but the stretch is so intense at such high weights that it pulls my head away from the ceiling no matter how well I put it on? I am doing everything the video on SS tells me to. The vas, the sticking the taped head in all the way and stuffing it to push out air, etc. I also have a small head, MUCH smaller than the width of the dome!

PAR 2: I just read what YOU do, and it seems pretty much what I AM doing, with the exception "I flip the sleeve off the dome such that I know it will seal" part. Here's what I DO (and correct me if I'm wrong but I THINK this is what the video tells me to do): I put the head in as far as it will will go and then, holding it there, I take the sleeve off the rim and onto my whole penis. AS it is on my shaft, I push and pull my shaft to get the excess skin stretched flat, while simultaneously pushing the head against the ceiling. I then push the head and shaft "into myself" (making my penis short by pushing it inside me) so that the head is severely pushing against the ceiling stuffed-wise, and THEN I put in the plug, pull my cock out from edges of the dome to make sure my head is stiffly against the ceiling. If it IS, I stretch.
Now, I WILL say this: I have a habit of having the rods far away from the base, so that I have to stretch the dome far far up to attach it. I also have a habit of, when fully stretched, pushing the dome from SU to SO to SD to get the right position, and at 11 pounds, my head pulls all the way away from the dome when I do this.
Here: YOU said "As I see the glans is in as deep as possible and pressing against the dome, I flip the sleeve off the dome such that I know it'll seal. At this point, while forcing the glans in, I place the plug. I then roll the sleeve down the rest of the way." ARE YOU SAYING that you FIRST pull a small portion of the rolled up sleeve around the bottom of your glans first?

PAR 3: Look, give me a new plan. I honestly thought I was "doing it right". Maybe I was overdoing it. I have the springs, I love the device. I jelq, I manual stretch for about 15 mins (windmill, SD, BTC) and the I slap the thing on.

YOU TELL ME what to do and I'll do it. If you want to to start extra slow, I will. I will fight it because I have issues with instant gratification issues and because I never blistered doing the 11, but I promise I will follow it. I can use it every day. I am waiting with anticipation: I have been dedicated and not missing a day!

BTW: What have been your gains? Just using the SS?

Respect,

Stevie
 
First off I think that higher weight isn't necessary to achieve gains. I have never hung high weight and have gained (and still gaining) just fine. High weight means discoloration, pain and injury. I think there are gains to be made from high weight but my belief is that it's a fight right out of the gate. I think you can 'panic' the tissues and cause stress-based or injury reactions that slow gains. It's a fight you can eventually win by continually increasing the weight. After a certain amount of weight the tissues give in. I refer to this as the Brute Force method: it works but it has its issues.

It sounds like you're putting the device on well enough to get the job done. Try using between 3 and 6 pounds (the 3 pound springs at between 50% and 100% compression) for a couple hours at a time. Keep in mind that you don't have to feel fatigue to gain. This is generally a hanger's goal which goes in hand with my first paragraph. You should however feel fatigue in the form of aching after using the HD SS for a couple hours at a weight that isn't freaking out your tissues. I refer to this as the Coercion method: it works as I have found and is far more comfortable. Start your tension at 3 lbs, wrap a rice sock around the setup, wait 20 minutes, increase to about 4 lbs, wait 30 minutes and go to 5 lbs, reheat the rice sock, wait 30 minutes more and go to 6 lbs. Let it sit there for an hour. When you're done, remove the rick sock and back the tension down over the next 20 minutes and then remove the HDSS. Always: If anything hurts, back it off a little. Use a sneakier attack: let your penis unwittingly help instead of dragging it kicking and screaming!

And remember: this takes time. It takes a lot of time. If there was a fast way to get a bigger dick we'd all be doing that. There are no magic ingredients: consistency and time are what grow your dick.
 
Last edited:
You got it MOREGAINS. I'll follow your plan to the T. I believe in the validity of your instructions and while I don't have a rice sock I will use a heating pad.

1. Pay attention to the ? because I may not be stating it right: I told you before that I have never seen FULL compression of the springs. Seemingly a stupid question, but what to the springs look like when fully compress (how will I know)?
2. With the device on, I compress the springs by ONLY screwing them towards the bottom of the round rods (the black brushers?) from below or do I press down on the rods and screw up simultaneously?
3. BIG QUESTION: WHAT HAVE YOUR GAINS BEEN BPenis EnlargementL-wise?! And have you just used the SS? Time? Etc.

MUCH RESPenis EnlargementCT!

Stevie
 
PS: I have been doing manual stretching as well, and today, I pulled myself out in the bathroom and actually felt internally a "good" pain, similat to a muscle being sore, right in my ligs. Is THAT fatigue?
 
stevie7inch;337188 said:
1. Pay attention to the ? because I may not be stating it right: I told you before that I have never seen FULL compression of the springs. Seemingly a stupid question, but what to the springs look like when fully compress (how will I know)?
Click to expand...
When a spring is fully compressed its coils are touching each other.

stevie7inch;337188 said:
2. With the device on, I compress the springs by ONLY screwing them towards the bottom of the round rods (the black brushers?) from below or do I press down on the rods and screw up simultaneously?
Click to expand...
Either way sounds OK, I screw them up toward bushings usually but have pressed down too. It depends on how far they need to go at the moment.

stevie7inch;337188 said:
3. BIG QUESTION: WHAT HAVE YOUR GAINS BEEN BPenis EnlargementL-wise?! And have you just used the SS? Time? Etc.
Click to expand...
I made the mistake of not measuring in my early days but I have 3/4" documented and another 1/2" from the beginning plus 1/2" of girth throughout.

stevie7inch;337188 said:
4. I have been doing manual stretching as well, and today, I pulled myself out in the bathroom and actually felt internally a "good" pain, similat to a muscle being sore, right in my ligs. Is THAT fatigue?
Click to expand...
Fatigue will be felt as you go through the day. Pain will usually be felt instantly. But using the HD SS as you've been would account for making it easier for manuals to work. Sort of softens things up a bit. That's why I used the Bib before putting on the HD SS.
 
Last edited:
MoreGains123;337271 said:
When a spring is fully compressed its coils are touching each other.

Either way sounds OK, I screw them up toward bushings usually but have pressed down too. It depends on how far they need to go at the moment.

I made the mistake of not measuring in my early days but I have 3/4" documented and another 1/2" from the beginning plus 1/2" of girth throughout.

Fatigue will be felt as you go through the day. Pain will usually be felt instantly. But using the HD SS as you've been would account for making it easier for manuals to work. Sort of softens things up a bit. That's why I used the Bib before putting on the HD SS.
Click to expand...

How long did the growth take you? You're saying you have gained roughly 1.5" in erect length? And the springs: is there ever a time where the bottom of the brushings and the bolt the screws sit in touch and the spring is so compressed that it "disappears"?
 
The first 1/2 took a while before I settled in to working routines. The last 3/4 was from discovering my Bib/Static Stretcher combination. Depending on which springs you are talking about they can 'disappear' when fully compressed.
 
I just got a Static stretcher myself and must say I like it alot. My only complaint is the little black things that are sapposed to trap air in and cause suction. They are horrible and barely trap air in at all.
 
You must log in or register to reply here.
Back
Top