Super

Well-known member
View attachment 26623

]I tried this for the first time today, I don't know what made me think of it it but as soon as I did I knew it would be a great combo. The [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] will work with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster[/words] very well, actually easier then then with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words]. Why? Because it requires no clipping method. With the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size Genetics[/words] you need the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] Clip, with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] you do not and its a more secure fit with one less moving part..Check out my picture. Ill repost my original thread about when I did the mod with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words].

Original Post
"This is my ultimate [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] that I have set up for myself using the best technology available today.

Ron makes 2 devices the [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] for foreskin restoration and the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] for Penis Enlargement. The [words=http://TLCTugger.com/MOS]VLC[/words] works but hold the head of the shaft at the grip point at the top of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words].
For this purpose, we are only using the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words].

The difference between the two is that the [words=http://TLCTugger.com/MOS]TLC[/words] has a hole in it that allows air in releasing the glands to the base and pulling the skin over. The [words=http://TLCTugger.com/MOS]VLC[/words] does not have the hole (vent less) so It does not let the head sink back to the base and gives you the shaft length that you want.

I can keep this on for hours on end with no loss in circulation or numbness since it not a noose that goes around the head but pull on it from the outside in. Up until now I have not been able to wear this thing longer than 15 minutes at a time, but now I can wear it for 4-6 hours at a time.

The regular noose method of the glans being cinched down will ultimately cause your reduced sensitivity, cold and numb glans and severe pain, thus you will have to take it off every 15-20 minutes. This new method I am using I can leave on for hours. So more time under [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words], less time taking it off for breathers and to regain circulation means much more gains.

Since I am really gaining good ground with my [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] and the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words]. I want you guys to be apart of this and get good results. This method is 100% proven, more time under [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words]=longer thicker penis that is permanent. What is even cooler is to gain length all you have to do is keep adding rods as your penis becomes accustom to the greater stretch, so in theory you can go as long as you want. I am going for DLD's length of 10.5''.
The first picture was taken back in April, The second was taken In August, see how much longer I am stretching now? About 4inches. And I can hold that for 6-8 hours a day.

The [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] and [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] are completely different one has a hole, the other does not. The amount of skin pulled over the Glans is about 1" with the [words=http://TLCTugger.com/MOS]VLC[/words], with the [words=http://TLCTugger.com/MOS]TLC[/words] you get between 5-6 or more depending on how much restoration you have done. If you have any other questions send a message to Ron at [email protected]


So how do you get started?

For this to work you need the following a [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster Pro[/words]

For the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] or [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words]
You also need the Your Skin Cone
Go To:
http://TLCTugger.com/MOS

Only [words=http://www.mattersofsize.com/join-now.html]MOS[/words] members get this special package.

Let me know if you need any help.
Also do me a favor, if you like the thread click the rep button on the bottom left to leave some good feedback so the thread grows more! Thanks!"
 
Last edited:
I have the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] but I will never extend without the [words=http://TLCTugger.com/MOS]VLC[/words] again. It is so much more comfortable than the strap or noose.
 
Make sure you Get the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster Pro[/words] head attachement
 
Glad it works with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words]. That must be the model I gave you:) Glad you are getting use!
 
doublelongdaddy;527199 said:
Glad it works with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words]. That must be the model I gave you:) Glad you are getting use!

Sorry I ran off with it! I had some great plans for it! Trust me your gonna love it.
 
Supra, for the Coupling socket (Item no.: EPMP-006) can it be fit into the rods of [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SIZEGENETICS[/words]? COmpatable? I am thinking of getting this rather than extra rods
 
I saw the Anatomic glans chamber with frenulum protection(Item no.: EPMP-001). How does it works? If i have [words=http://TLCTugger.com/MOS]VLC[/words] will this more comfortable? ANyone tried this?
 
tanys1028;527376 said:
Supra, for the Coupling socket (Item no.: EPMP-006) can it be fit into the rods of [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SIZEGENETICS[/words]? COmpatable? I am thinking of getting this rather than extra rods

Yes it will fit

tanys1028;527379 said:
I saw the Anatomic glans chamber with frenulum protection(Item no.: EPMP-001). How does it works? If i have [words=http://TLCTugger.com/MOS]VLC[/words] will this more comfortable? ANyone tried this?

I have the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] chamber I don't like it at all. I use the [words=http://TLCTugger.com/MOS]VLC[/words] for shaft lengthening.
 
Supra;527401 said:
Yes it will fit



I have the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] chamber I don't like it at all. I use the [words=http://TLCTugger.com/MOS]VLC[/words] for shaft lengthening.



Ok thanks bro Supra. I have placed my order for the coupling socket. If it can fit [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Sizegenetics[/words] without slipping out of the rods then it shld a good alternatives to rods.
I have used up all my rods, now the equipment is so long i'm afraid it might break upon any hard contact.
Now with the socket, the whole length would be shorten.
Kudos to supra for the recommendation!
 
Supra;527401 said:
Yes it will fit


Hi Supra

Bad news. After I've placed my orders for Coupling socket, their guys replied to my queries via email that their spare parts are not compatible with other [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words].

I am worried. How certain are you that the socket will fit (without slipping off when pointed down) on [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words]?

OR any bros here tried with it on [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]???
 
I am surfing the website but couldn't find the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ans[/words] yet. Blame me for buying so fast. I read in [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words] thread that the rod diameter of [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words] and [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Sizegenetics[/words] is different, mentioning [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Sizegenetics[/words] rods are thinner.

Which means, the socket can be slotted in, but possibility of dropping off when I have my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] pointing downwards.

Anyone tried coupling socket with [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words]?Urgent. If confirm can't fit I'll have to get back to them and ask to cancel my orders..
Please anyone!?
 
tanys1028;527417 said:
Supra;527401 said:
Yes it will fit


Hi Supra

Bad news. After I've placed my orders for Coupling socket, their guys replied to my queries via email that their spare parts are not compatible with other [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words].

I am worried. How certain are you that the socket will fit (without slipping off when pointed down) on [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words]?

OR any bros here tried with it on [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]???

It will work. I use it with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] head attachment and it fits fine on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Sizegenetics[/words] rods.
 
tanys1028;527421 said:
I am surfing the website but couldn't find the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ans[/words] yet. Blame me for buying so fast. I read in [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words] thread that the rod diameter of [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words] and [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Sizegenetics[/words] is different, mentioning [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Sizegenetics[/words] rods are thinner.

Which means, the socket can be slotted in, but possibility of dropping off when I have my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] pointing downwards.

Anyone tried coupling socket with [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words]?Urgent. If confirm can't fit I'll have to get back to them and ask to cancel my orders..
Please anyone!?

Of course they will not tell you that their product works with other products. They want you to buy the whole thing and not just the head piece.

It will fit, Supra posted the pic of it working fine. And about dropping off, your penis is clipped in and stretched, so wouldn't that help to pull back on the head piece to keep it on?

If worse comes to worse just add a little tape to hold the bars on. Nothing to freak out about, this site is full of brilliant minds who can come up with a solution for anything. I ordered the same piece yesterday. It will be all good and can't wait for it to come
 
JohnnySisco;527444 said:
Of course they will not tell you that their product works with other products. They want you to buy the whole thing and not just the head piece.

It will fit, Supra posted the pic of it working fine. And about dropping off, your penis is clipped in and stretched, so wouldn't that help to pull back on the head piece to keep it on?

If worse comes to worse just add a little tape to hold the bars on. Nothing to freak out about, this site is full of brilliant minds who can come up with a solution for anything. I ordered the same piece yesterday. It will be all good and can't wait for it to come


Appreciate JohnnySisco for yr post.

Yes, the penis is clipped and stretch, but if the rods coundn't hold on to the head piece (which is the coupling socket), it will fall off if the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] is pointing down. (gravitational pull. Pointing up shouldn't be a problem)

I have tried to use another extra head (extender from other brands), it can slot in but is too loose.
Which is why i am concern with getting the right size.
U are right I can add in extra stuff (like tape), but this extra hassle would be eliminated if it can fit in like orginal [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetic[/words]'s head piece.

Looking at Supra's picture of his [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] and socket, the rods seems different from my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words] [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words].

Perhaps supra can confirm to this??
 
oh yes, i see what you are saying about the rods. I was not even paying attention to it before. Good catch. I guess to me the tape or using something to hold the head piece in it worth it instead of buying extra bars and it hitting my knee when I try to walk.
 
tanys1028;527772 said:
Appreciate JohnnySisco for yr post.

Yes, the penis is clipped and stretch, but if the rods coundn't hold on to the head piece (which is the coupling socket), it will fall off if the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] is pointing down. (gravitational pull. Pointing up shouldn't be a problem)

I have tried to use another extra head (extender from other brands), it can slot in but is too loose.
Which is why i am concern with getting the right size.
U are right I can add in extra stuff (like tape), but this extra hassle would be eliminated if it can fit in like orginal [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetic[/words]'s head piece.

Looking at Supra's picture of his [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] and socket, the rods seems different from my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words] [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words].

Perhaps supra can confirm to this??

I'm actually using the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster Pro[/words] in that picture. The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] rods are a bit smaller but still should work. I need to try the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] head attachment with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size Genetics[/words] to confirm this, Ill try it out and let you know. If it flips upwards like you are talking about tape should help but let me try all this tonight and get back to you.
 
Last edited:
Supra;527784 said:
I'm actually using the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster Pro[/words] in that picture. The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] rods are a bit smaller but still should work. I need to try the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] head attachment with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size Genetics[/words] to confirm this, Ill try it out and let you know. If it flips upwards like you are talking about tape should help but let me try all this tonight and get back to you.

Bingo!


Thanks. After attaching it, try to overturn it to see if it drops off. Looking forward to your reply then Supra.
 
Last edited:
Supra;527790 said:
You have not ordered anything yet right?

I ordered already. Which is worrying because it is quite expensive.

I am using [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] even when I am outdoor. Using a tape is not totally foolproof. So if the head drops off halfway from my shorts, everyone would be bewildered! haha
 
tanys1028;527788 said:
Bingo!


Thanks. After attaching it, try to overturn it to see if it drops off. Looking forward to your reply then Supra.

OK it fits and snaps in just fine, you should not have any problem. You need to anchor the stuff down with shoe string to your undies so if anything falls off it wont show.
 
Supra;527793 said:
OK it fits and snaps in just fine, you should not have any problem. You need to anchor the stuff down with shoe string to your undies so if anything falls off it wont show.

Thanks for yr confirmation!!!
 
Anyone know if I can use the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] with the Andropenis?

Thanks!
 
This is fucking baddass Supra!!! The original [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster pro[/words] head vacuums my head at an upward angle and is weird for me, also I still could only stay in it for an hour or 2. I can leave the [words=http://TLCTugger.com/MOS]VLC[/words] attached all day.


For those of you that have done this, how stealthy is it. My problem with [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] in the past was they were impractical to use outside of the home. Its spring here and I would like something that I can use with shorts if at all possible.
 
Back
Top