Status
Not open for further replies.

abird

0
Registered
Joined
Jan 7, 2006
Messages
8
ive been wearing my ring now for 6 months, and i can say i have found the key to makeing this work. If you put your ring on your package or just your bag, its not going to make any difference at all. Ive looked at every webpage on the net, google can come up with on the rop. If you don't believe me or aren't getting what you want from your rop do this. Get a bottle of lotion, be sure its WATER based, thick lotion works best. Pour or squeeze out about a 2 tablespoons into a small bowl, put a quarter of a teaspoon of vinegar it it and just a very small amount of salt and mix it up with your finger.Put it on your skin under the copper and zinc rods a few times a day, the more times the better, keep it moist. In one day it will make your rop come to life. I personally went from ho hum to peter north in one day!

Beware tho, the little with bumps you hear people talk en about on hear, your gonna get em and a good case of them. So adjust the amout of vinegar and salt{most likely less than what i said}
the lotion and copper rod it going to turn green but don't worry it comes right off.
Salt conducts electricity and vinegar keeps the rod clean and helps electricity flow, lotion just keeps it from evaporating
if anybody trys this and it works for em, return the favor and let me know
 
Great ideas. I have not worn mine in years, but was thinking of giving it another try. I was wondering what kind of lotion you would recommend?
 
I shall try this on Sunday night after work, thanks for this.
Also reminds me that my review of the ROP is long overdue and I aint worn it for many months.
 
I used to wear my ROP, back in the days. I stopped because after the 3rd month, I didn't notice a difference anymore. I tried something similar, but I used lemon juice instead of salt. It really does kick up the ROP's conductivity to a higher level. If your package tends to sweat, you can just rub alittle bit of lemon juice on the area of your penis that comes in contact with the ROP and wait for the effects to be fely. I remeber some nights I was waken up by the sensation of the ROP jolting my package so much that I would have to remove it. That was a sure sign that the lemon juice did the trick. When I applied alittle lemon juice before bed, the ROP would also cause me to get eretions so hard that it would stretch the latex tubing until the ROP would pop off. Yes, those infamous bumps are a pain but can be soothed and cured with rubbing alcohol,regular care, and alittle rest from the ROP. Might pull mine out of the ol Penis Enlargement arsenal and I see that I am not alone on that one. HOLLA BACK!!
 
no, no smells. Use water based lotion because water base will mix with vinegar,,oil base wont.
always mix with the lotion, because 1 it will evaporate, and 2 you will end up with a ph burn
 
abird said:
ive been wearing my ring now for 6 months, and i can say i have found the key to makeing this work. If you put your ring on your package or just your bag, its not going to make any difference at all. Ive looked at every webpage on the net, google can come up with on the rop. If you don't believe me or aren't getting what you want from your rop do this. Get a bottle of lotion, be sure its WATER based, thick lotion works best. Pour or squeeze out about a 2 tablespoons into a small bowl, put a quarter of a teaspoon of vinegar it it and just a very small amount of salt and mix it up with your finger.Put it on your skin under the copper and zinc rods a few times a day, the more times the better, keep it moist. In one day it will make your rop come to life. I personally went from ho hum to peter north in one day!

Beware tho, the little with bumps you hear people talk en about on hear, your gonna get em and a good case of them. So adjust the amout of vinegar and salt{most likely less than what i said}
the lotion and copper rod it going to turn green but don't worry it comes right off.
Salt conducts electricity and vinegar keeps the rod clean and helps electricity flow, lotion just keeps it from evaporating
if anybody trys this and it works for em, return the favor and let me know


abird, you said you went from ho hum to Peter North in one day, how about giving us a few more details on exactly what you've noticed ? Have the results you've had lasted ? I know from my experience, it seemed as though I would get real good results only in the hot weather when I was sweating a lot.
I've long suspected a person could make the ROP more effective by figuring out a way to keep the skin wet and salty all the time, thanks for confirming that.

Dan
 
aloe vera would be great. I believe its water based
things i noticed were rock hard woodie, huge load of sperm, horny has hell,
everything a rop is supposed to do.
also noticed burning-shock sensation, at times its uncomfortable but i can get passed that.
remember adjust salt and vinegar, what may work for you, might not work for me because each persons skin body ph is a little different. So if you get too many white bumps,soreness,rash, back off on the salt and vinegar
experiment with the formula
 
if you all wanna see if a lotion you have kicken around the house is oil or water based just try mixing a little bit of whatever you have with water, if water will not mix with it, its oil base
if water mixs with it, its water based and thats what you want
 
Everybody's sweat is different. Perople who eat a lot of salt and sweat more might find that it works without anything else.

Moisturizers are most often oil-based, and just because they contain an emulsifier which might accept water, doesn't mean they are conductive. I would not personally use a "moisturizer."

There are conductive gels that are used under pads, which might work, but they evaporate and get dry when exposed to air. That's why I started out by putting a multimeter on the two poles of the "cell" created by the copper and zinc, and then checking voltage I got when it was fastened. Aty first it was practically zero. Then a misted a little water with vinegar and tried it again. I got .3 volts or a tad more.

That's as high a voltage as I've been able to reach, but that's a lot better than zero. I'll take it.

Curious-- after wearing it for two days, my scrotum and the underside of my penis developed a kind of "crusty" coating of some kind. It might be from the vinegar, but I suspect it's more likely caused by the copper. Has anybody else experienced this?
 
I will try to mix with hair conditioner and KY lubricant.

Bird how many times do you re-apply the formula?
Do you use your rop all day?
 
I don't want to worry anybody. The "crusty coating" I discovered was simply from a soap scum by dishwashing liquid. No problem. Just don't want to discourage anybody because I wrote that. I wasn't sure at the time. Now I am.

Glycerine and the glycols are not conductive at all. As a matter of fact, they are good insulators. Don't use moisturizers with glycols and glycerine.

By far the best conductor that also lasts the longest is a salt solution. What to do is this: Get some salt and some water together, in a little bottle with an eyedropper cap. Put more salt in the bottle than the water will dissolve. Use about an eyedropper full, per day. One application seems to do it for all day. I rechecked the voltage about 6 hours from when I applied the solution, and I was at .5 volt. That's better than vinegar, and there's no oder either.

Give it a try and see what you think.
 
abird said:
aloe vera would be great. I believe its water based
things i noticed were rock hard woodie, huge load of sperm, horny has hell,
everything a rop is supposed to do.
also noticed burning-shock sensation, at times its uncomfortable but i can get passed that.
remember adjust salt and vinegar, what may work for you, might not work for me because each persons skin body ph is a little different. So if you get too many white bumps,soreness,rash, back off on the salt and vinegar
experiment with the formula

Thank for the additional comments abird. The key must be in getting that steady constant voltage.
Definitely worth experimenting with.

Dan
 
Formysweetie said:
I don't want to worry anybody. The "crusty coating" I discovered was simply from a soap scum by dishwashing liquid. No problem. Just don't want to discourage anybody because I wrote that. I wasn't sure at the time. Now I am.

Glycerine and the glycols are not conductive at all. As a matter of fact, they are good insulators. Don't use moisturizers with glycols and glycerine.

By far the best conductor that also lasts the longest is a salt solution. What to do is this: Get some salt and some water together, in a little bottle with an eyedropper cap. Put more salt in the bottle than the water will dissolve. Use about an eyedropper full, per day. One application seems to do it for all day. I rechecked the voltage about 6 hours from when I applied the solution, and I was at .5 volt. That's better than vinegar, and there's no oder either.

Give it a try and see what you think.

Hey maybe a saline solution work. I use it in my contact lens. I will try with my rop.

Abird what do you think about a salt solution? Just water and salt!
 
I did some expiriments tonite with different anodes and cathodes, and different electrolytes.

Using a paper towel moistened with plain tap water, Cu (+) and Zn (-) measured about 0.4 V. Cu and Mg measured 0.9 V. Replacing the Cu with pure carbon measured no noticeable difference. Pure silver increased the voltage about 25%. Replacing the Zn with Mg produced the highest voltage reading.

I repeated the expiriment with tap water mixed with sodium chloride (salt). The sodium electrolyte did not increase the voltage reading over plain tap water. I have no idea what the sodium content of my tap water is though. Maybe I'll repeat the expiriment with distilled water.

Other considerations as to the effectiveness of the ROP could be the bodies pH. It can vary from acidic to alkiline. I've checked mine and I was alkiline while my gf was acidic.

Next expiriment, I'll use bleach (alkiline) vs vinegar (acidic).

btw, it's been a long time since high school chem for me, so correct my errors plz
 
DO not use bleach! 47 percent of any bleach/ chlorine, is acid that will burn you. Bleach is manufactured using salt thats boiled with a low voltage, don't add to the stew buy adding bleach.

Look men. were chartering unsailed waters here using the rop, I'm sure none of us are nano scientist's or chemists, keep it simple.
lemon juice or vinegar are natural acids and salt is pure also.
Please just take what Ive told you and try it, don't mess with it, its simple cheap and at least to me makes since.
 
Status
Not open for further replies.
Back
Top Bottom