HeyI got a scary experience today..... I was using the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] and I took a brake so when I took the glande capsule I eas scared because it had a considerable amount of blood. It even had coagulated blood but I didn't feel anything in spite of the amount of blood. I thought it was interal but no because I urinated after that and even ejaculated (wife wanted sex and it was hard to resist) but there was no trace of blood. Then I noticed what it seems to be a tinny cut in the frenulum.... So most likely the blood come from there but I'm amazed because there was a lot of blood but the cut is so small... And I didn't feel anything at all. I don't think I'm overtraining because I'm doing brakes (every hour or 2) for going to bathroom or simple rest. Any advices on this? Maybe just do clamping for a few days? And [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]? I think it would be harmfull at this stage. Any thoughts?
Penimastrer pro + blood
Let your frenulum heal for 3+ days. Micro tears will be aggravated with continued use of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words], even sex.
You can experiment with how much/how little insertion into the Chamber, so that stress on that part is minimized.
Also the amount of "lube", the amount of vacuum, and the amount of tension(grams) used all interplay.
You didn't say what magnitude grams you are using, but I found using less than I had been, helped not re-create that problem.
Great device, but it is too easy to get carried away with it, only to find out that you need to not be so aggressive with its use.
good luck.
You can experiment with how much/how little insertion into the Chamber, so that stress on that part is minimized.
Also the amount of "lube", the amount of vacuum, and the amount of tension(grams) used all interplay.
You didn't say what magnitude grams you are using, but I found using less than I had been, helped not re-create that problem.
Great device, but it is too easy to get carried away with it, only to find out that you need to not be so aggressive with its use.
good luck.
Thanks.... I was using 1100 grams but I didn't start with that as I did adaptation time until I progressed to that force.Regardin lub I use it a lot... I use the old spit and my glande slides easily inside the chamber. I remenber now that in the last times I used the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] I did something... After having the glande inside the chamber I attached once again the pump ball and extract air. I felt my glande adjusting completly to the chameber. Like a swalloing sensation..... Maybe this was it? What your advice go down to 800 grams? Don't pump twice the ball?
PS - The [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster[/words] is so good and confortable..... Have you seen gain from it?
PS - The [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster[/words] is so good and confortable..... Have you seen gain from it?
You can reduce grams, and that will not require as much vacuum. Less chance to re-open a wound.
When you mount into the sluice/chamber, try to push as much of the shaft/glans into the sluice, and use less of a vacuum to draw it in. It takes a little practice, but will result in less vacuum stress to the tissues.
I know it is too easy to just let the vacuum suck you in. I have emailed [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] for more enlightenment on this variation in "mounting" yourself in.
When you mount into the sluice/chamber, try to push as much of the shaft/glans into the sluice, and use less of a vacuum to draw it in. It takes a little practice, but will result in less vacuum stress to the tissues.
I know it is too easy to just let the vacuum suck you in. I have emailed [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] for more enlightenment on this variation in "mounting" yourself in.
Hey Dangler,
I have a micro tear in my frenulum as well and am resting from Penis Enlargement for last 2 days.What has [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] told you in regards to preventing this?
I have a micro tear in my frenulum as well and am resting from Penis Enlargement for last 2 days.What has [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] told you in regards to preventing this?
Dangler;479293 said:
Sorry to hear of this Dickleaker, I've not had a reply yet.
I have come to conclude, that it is important to insert enough of the glans & shaft, so that the "grip", if you will, comes on the abdomen side of the corona AND frenulum.
To accomplish this, I use just enough vacuum to get about half my glans in the sluice opening, then use a jelqing like "milking" of the shaft, to push more into the sluice.
I may need to use just a tad more vacuum, to finish off the insertion. I can usually feel the corona just sliding past the opening of the Chamber.
If you have a foreskin, or a loose cut circumcision, you may need to draw back some of that skin.
Of course, <grin>, your mileage may vary.
I have come to conclude, that it is important to insert enough of the glans & shaft, so that the "grip", if you will, comes on the abdomen side of the corona AND frenulum.
To accomplish this, I use just enough vacuum to get about half my glans in the sluice opening, then use a jelqing like "milking" of the shaft, to push more into the sluice.
I may need to use just a tad more vacuum, to finish off the insertion. I can usually feel the corona just sliding past the opening of the Chamber.
If you have a foreskin, or a loose cut circumcision, you may need to draw back some of that skin.
Of course, <grin>, your mileage may vary.
footnote:
any slippage out of the chamber, may be cause of stress on the frenulum area.
I make a point to "re-vacuum" if needed. If you are running at max grams, have no spring cushion in reserve, and you bend over to pick something up....you may unknowingly place a large amount of stress on parts of the penis, resulting in skin breakage on the surface.
any slippage out of the chamber, may be cause of stress on the frenulum area.
I make a point to "re-vacuum" if needed. If you are running at max grams, have no spring cushion in reserve, and you bend over to pick something up....you may unknowingly place a large amount of stress on parts of the penis, resulting in skin breakage on the surface.
Hey Dangler ,
Thanks for your concern and your input on a possible solution for this.I have had this happen to me once before and I believe its comes from wearing the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] and an elastic strap while i am working and yeah alot of bending while I am working.
My tear has healed and I am back extending today ...even 2 days away from Penis Enlargement and i am itching to get back at it ...truly an addicting hobby!
I will try milking my dick to see how much of my glans I can insert without additional vacuum to see if this helps .
All the best to you!
Thanks for your concern and your input on a possible solution for this.I have had this happen to me once before and I believe its comes from wearing the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] and an elastic strap while i am working and yeah alot of bending while I am working.
My tear has healed and I am back extending today ...even 2 days away from Penis Enlargement and i am itching to get back at it ...truly an addicting hobby!
I will try milking my dick to see how much of my glans I can insert without additional vacuum to see if this helps .
All the best to you!
Dangler;479360 said:
No DLD it was very small micro tear but enough pain to stop for 2 days to heal.
I last measured march 17th and got a gain of 3/8" in erect length after 2 1/2 months using the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] /extender and slight increase in girth as well and am extremely happy with that!!
I last measured march 17th and got a gain of 3/8" in erect length after 2 1/2 months using the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] /extender and slight increase in girth as well and am extremely happy with that!!
doublelongdaddy;479564 said:
That gain is great! What is your routine with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words]???
I resumed [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] session after my frenulum healing. Its still sensitive because When I started to pump I felt a small pain. So I stoped until it went away and pumped again and waited and pump again and so on. A very smooth session without any streches and hit just the 18 mark. I won't risk doing [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] in the same day yet. So tomorrow I resume [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] but I'll lower the grams a litlle and try to put more shaft inside.
I resumed [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] session after my frenulum healing. Its still sensitive because When I started to pump I felt a small pain. So I stoped until it went away and pumped again and waited and pump again and so on. A very smooth session without any streches and hit just the 18 mark. I won't risk doing [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] in the same day yet. So tomorrow I resume [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] but I'll lower the grams a litlle and try to put more shaft inside.
Thanks Apolo!
The routine is very simple. I use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]/pmp for as many hours that i am home ..about 6 and wear the elastic strap from [words=http://TLCTugger.com/MOS]tlc[/words] [words=http://TLCTugger.com/MOS]tugger[/words]/pmp for the remaining hours that I am awake.
I am being more careful to only use enough vacuum with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] and no more to lessen the stress on my glans and frenulum.
Good luck to you ..keep up the good work champ!
The routine is very simple. I use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]/pmp for as many hours that i am home ..about 6 and wear the elastic strap from [words=http://TLCTugger.com/MOS]tlc[/words] [words=http://TLCTugger.com/MOS]tugger[/words]/pmp for the remaining hours that I am awake.
I am being more careful to only use enough vacuum with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] and no more to lessen the stress on my glans and frenulum.
Good luck to you ..keep up the good work champ!
apolo;479719 said:
Thanks… .I know that experienced users and the brand itself say that it’s better to use lower force In the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] to achieve results. But due to my job and schedule I don’t pass many hours at home. So I can only wear for 1 to 4 hours a day…. Taking this in consideration is the better way to achieve bigger gains use more tension in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]? Will this help ?
apolo, I'll just throw my thoughts into the mix, just to share, mind you.
I have read of so many [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] users that once harvesting the newbie gains, could not wait to try and accelerate the process. That translated into more hours, more grams, and variations of both. These variations were of some use to "break" a plateau, some times, other times more hand exercises, increased use of a rice sock (for warmth), helped.
What I decided, was that cell division, mitosis, occurred around a certain range of [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words]. For me, it was 600 to 1000 grams. What I also found true was rest days were necessary. One or two a week, sometimes 3 days at the end of the month. You can hand stretch, jelq, etc on rest days.
I point out that in the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] pdf manual, page 54, they point out that they have found that:
"alternating breaks and training phases will result in better results than a monotonous load".
and
"you should aim at using the device for several months, the results of which can even be improved on the basis of interruptions of several days."
Best I could volunteer, is that has worked best for me, now in year 4. Don't rush things, instead work out a schedule of wearing, and stick to you schedule.
Regards,
Dangler
I have read of so many [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] users that once harvesting the newbie gains, could not wait to try and accelerate the process. That translated into more hours, more grams, and variations of both. These variations were of some use to "break" a plateau, some times, other times more hand exercises, increased use of a rice sock (for warmth), helped.
What I decided, was that cell division, mitosis, occurred around a certain range of [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words]. For me, it was 600 to 1000 grams. What I also found true was rest days were necessary. One or two a week, sometimes 3 days at the end of the month. You can hand stretch, jelq, etc on rest days.
I point out that in the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] pdf manual, page 54, they point out that they have found that:
"alternating breaks and training phases will result in better results than a monotonous load".
and
"you should aim at using the device for several months, the results of which can even be improved on the basis of interruptions of several days."
Best I could volunteer, is that has worked best for me, now in year 4. Don't rush things, instead work out a schedule of wearing, and stick to you schedule.
Regards,
Dangler
Thanks Dangler... The problem is to get a schedule..... For example this weekend I didn't wear the PM because i spent almost all the time outside my house.... Today I'll arrive after 22:30h. Tomorrow if lucky I 'll be home at 21h.. it's hard to have a schedule this way. That's why I asked about using a bigger [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] force when I was using the PM... Not about rushing! I also do some rest days regularly. Usually there's a day or two that I will only use [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and no PM and vice versa. And from time to time I 'll take a day without any PM/Bathmate and only do clamping all day.
PS - The clamp is almost a second skin!!!!
PS - The clamp is almost a second skin!!!!
In my thinking & the way I use any [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words], apolo, skin/cells respond more favorably to a given range of [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] (ex. 600 to 1000 grams). If you show up trying to use more than that, because your schedule is "pinched", you don't get more, you start doing something other than elongating/stretching of cells.
Some subscribe to micro tears, creating scar tissue, etc.
I go by how I have practiced over the years.
I find what benefits me the most, is rest days, or at the end of a month a couple three days off in a row. Yes there are plateaus. Some jump ship and result to hanging bowling balls or whatnot. I play the waiting game instead.
hth
Some subscribe to micro tears, creating scar tissue, etc.
I go by how I have practiced over the years.
I find what benefits me the most, is rest days, or at the end of a month a couple three days off in a row. Yes there are plateaus. Some jump ship and result to hanging bowling balls or whatnot. I play the waiting game instead.
hth
Hi,
I just received the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster pro[/words], and for the life of me i don't know how to vacuum the glans in.
I got a 4 part setup for the glans part. the chamber, a diaphragm on the chamber, a second very tight latex ring with two widening plastic things inside, and the vacuum pump that normally attaches to the glans chamber.
First, i don't think i can stick my glans in that chamber with the tight thing at the end with the two plastic mold things.
Second, i tried the vacuum connection on the chamber but it's a hit and miss thing. I don't know what i'm doing wrong, but i can't get a vacuum going.
How do you do this?
Any help greatly appreciated
I just received the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster pro[/words], and for the life of me i don't know how to vacuum the glans in.
I got a 4 part setup for the glans part. the chamber, a diaphragm on the chamber, a second very tight latex ring with two widening plastic things inside, and the vacuum pump that normally attaches to the glans chamber.
First, i don't think i can stick my glans in that chamber with the tight thing at the end with the two plastic mold things.
Second, i tried the vacuum connection on the chamber but it's a hit and miss thing. I don't know what i'm doing wrong, but i can't get a vacuum going.
How do you do this?
Any help greatly appreciated
1st make sure you have everything hooked up right
2nd you may or may not need those rings that are half and half that will make a difference I didnt need them
3rd make sure the valve is closed if its facing you turn it all the way towards your right and it should be touching the base then squeeze the pump ball and and line it up u should see these 2 lines at the bottom of the pump ball and line it up and push it down then turn it towards the left and let it suck in the glads and ones its in turn back to the right and pull it off then u should be good
2nd you may or may not need those rings that are half and half that will make a difference I didnt need them
3rd make sure the valve is closed if its facing you turn it all the way towards your right and it should be touching the base then squeeze the pump ball and and line it up u should see these 2 lines at the bottom of the pump ball and line it up and push it down then turn it towards the left and let it suck in the glads and ones its in turn back to the right and pull it off then u should be good
Practice using (bulb or hose) and seeing the diaphragm sucked into the chamber, without putting your glans in. After you perfect working that aspect, then proceed with having the suction draw in a lubricated penis head.
The learning curve is steep, but once you figure out the opening/closing of the chamber to hold/release the vacuum, your on you way.
The learning curve is steep, but once you figure out the opening/closing of the chamber to hold/release the vacuum, your on you way.
Hi again,
Thanks for the explanation. I can get to the point of having the diaphragm being sucked into the chamber but not entirely, and somehow if i try turning the valve around the air just comes out.
So here's what i understood:
1- turn the valve to closed position with the vacuum pump.
2-suck the air out of the vacuum then turn, or rotate it to the left, push it towards the chamber and release the vacuum which will suck in the diaphragm.
3-pull out the pump and rotate it back to the right then take it off??
will try again now.
Thanks for the explanation. I can get to the point of having the diaphragm being sucked into the chamber but not entirely, and somehow if i try turning the valve around the air just comes out.
So here's what i understood:
1- turn the valve to closed position with the vacuum pump.
2-suck the air out of the vacuum then turn, or rotate it to the left, push it towards the chamber and release the vacuum which will suck in the diaphragm.
3-pull out the pump and rotate it back to the right then take it off??
will try again now.
no you have it backwards that may be why it isnt fitting ok here we try this again visualize that the chamber is bout to be placed on your dick having it straight out in front of you ok ready
1. Make sure the valve is turn all the way to the right meaning its closed and no air can get in or out.\
2. Squeeze the pump and hold it then place it on the valve.
this is what may have confused you depending on what hand you are im right handed so I turn it towards my left to allow it to suck in what you can do is while it is sucking in assist your penis by slightly pushing it in as well and once you get it in turn it back towards your right hand.
3. If you feel you need to be sucked in more repeat step 2 by squeezing the ball and turn towards the left meaning your left arm and let is suck in till you feel its enough and turn back towards your right arm to close it off when you have enough suction hope this helps
Took me a few mins to get the hang of it as well now I can get it on in about 3 second
1. Make sure the valve is turn all the way to the right meaning its closed and no air can get in or out.\
2. Squeeze the pump and hold it then place it on the valve.
this is what may have confused you depending on what hand you are im right handed so I turn it towards my left to allow it to suck in what you can do is while it is sucking in assist your penis by slightly pushing it in as well and once you get it in turn it back towards your right hand.
3. If you feel you need to be sucked in more repeat step 2 by squeezing the ball and turn towards the left meaning your left arm and let is suck in till you feel its enough and turn back towards your right arm to close it off when you have enough suction hope this helps
Took me a few mins to get the hang of it as well now I can get it on in about 3 second
note to sevenup,
Don't feel like you are the only one that struggles with this issue & the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] Pro ! I got so fed up with all the twisting squeezing of the bulb, I adapted my chamber so I can get the vacuum by attaching my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penis Pump[/words] via a quick disconnect (Cole Parmer fitting).
Don't feel like you are the only one that struggles with this issue & the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] Pro ! I got so fed up with all the twisting squeezing of the bulb, I adapted my chamber so I can get the vacuum by attaching my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penis Pump[/words] via a quick disconnect (Cole Parmer fitting).
Ok, I don't know if this is possible.
When i have the chamber in front of me as if i were going to wear it, and the vacuum pump opposite, here is what i get:
1-the valve on the chamber is completely closed. When it is, there are these two stripes or groves in the valve, 90 degrees from the two pins sticking out at the bottom of the valvle connecting the chamber.
2-i push down the vacuum pump but not until it locks with the pins otherwise i can't turn the valve. Am i correct thus far?
3-i turn the vacuum pump until the valve opens and i can stick the pump back down to the level of the pins.
4- knowing the pump is already squeezed, i release, and well the diaphragm sucks into the chamber.
This is where i can't do anything. i move the vacuum pump the slightest bit and all the bacuum goes away. No matter what i do. So i can't understand how you can close the valve back because you have to push the vacuum pump down in order for a vacuum to take place, and pull it back out to close the valvle. This is seriously pissing me off cuz it makes me think i'm a total moron and missing something essential yet simple.
When i have the chamber in front of me as if i were going to wear it, and the vacuum pump opposite, here is what i get:
1-the valve on the chamber is completely closed. When it is, there are these two stripes or groves in the valve, 90 degrees from the two pins sticking out at the bottom of the valvle connecting the chamber.
2-i push down the vacuum pump but not until it locks with the pins otherwise i can't turn the valve. Am i correct thus far?
3-i turn the vacuum pump until the valve opens and i can stick the pump back down to the level of the pins.
4- knowing the pump is already squeezed, i release, and well the diaphragm sucks into the chamber.
This is where i can't do anything. i move the vacuum pump the slightest bit and all the bacuum goes away. No matter what i do. So i can't understand how you can close the valve back because you have to push the vacuum pump down in order for a vacuum to take place, and pull it back out to close the valvle. This is seriously pissing me off cuz it makes me think i'm a total moron and missing something essential yet simple.
Hi again.
I have another problem here. There is no way in hell i can use that psruce. The biggest one can't allow my glans to pass through even if i was in freezing temperature. The default spruce is the biggest there is in the setup.
And i still can't do any sustainable vacuuming unless i keep the pump attached, and even then things are really fragile. The slightest rotation or push of the pump and all the air comes back into the chamber.
So far, this expensive piece of hardware is justfrankenstein looking weight.
I have another problem here. There is no way in hell i can use that psruce. The biggest one can't allow my glans to pass through even if i was in freezing temperature. The default spruce is the biggest there is in the setup.
And i still can't do any sustainable vacuuming unless i keep the pump attached, and even then things are really fragile. The slightest rotation or push of the pump and all the air comes back into the chamber.
So far, this expensive piece of hardware is justfrankenstein looking weight.
you need to start with the valve closed and then put the pump on then turn towards the left and allow it to suck in until desired pressure then when finished turned back the other was and pull it off the only thing I can think of is its not closed when u start off in the first place that is what u need to make sure if not the air will keep coming out when u pull it off