Intrigued yet frustrated (new LM owner)

B

BusterHymes

0
So I've been working with my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] for a few weeks now. Just as a stretcher. When it is setup up initially for a session, the stretch is otherworldly. Great device.

However, for me to get any decent grip I have to clamp it all the way down. This ends with massive bruising each session. It's not that I have a small cock - 6.25 girth which tends to be rather full even in a flaccid state; nearly 7" length. I try to set it up about 1/2 down my cock. After a few stretches, however, the head is clearly slipping back into the device. So clamped down fully, still bruising, yet slipping?

I use sports pre-wrap and theraband setup for wrapping. It is very lightweight and comfortable. The amount of each is minimal.

So at this stage I'm not sure where to go with it. If I back off the actual stretch intensity, there is no point to it as I see it. Btw, I do 40 sec on/20 sec rest stretches. I have tried setting up in the bundle device (whatever it is called) from both entry points. Neither particularly solves the issue.

I suspect I am not the only one with this going on, so what has worked for guys?

I really enjoy using the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] in the AM and PM if I can (there's a jingle in there somewhere!), and it is a fantastic first set sub for hanging. After a 10-15 min session, I am totally pre-fatigued for hanging. The feeling is best I've ever had!

So please help me work this out, brothers.
 
Last edited:
A 100% flaccid penis is an important part here.takes time to master the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] slippage is a common thing when you are learning to use the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words].

The wrapping part is important cause the bandage helps to keepthe penis locked in the chamber.
Video - Wrap For [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]Length Master[/words]
Started by youknowme123321,


Make sure the fly nuts are tight enough youd feel how much pressure you need to avoid slippage..but takes time n practice...Dont expect amazing gains in a month the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] is a great device but i dont think is reasonable to gain an inch in one month..:)
 
The problem I am having is with wrapping, and as it is said, 'grasping the internals'. What is happening is that the penis is escaping back into the bundle assembly underneath the skin. I have it clamped all the way down. I pull my skin back, wrap up (have tried it with only [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap and have tried it unwrapped as well), and leave the head and 1/2" (or more) of penis hanging out the front. Still it rides under the skin and the head escapes back and I lose [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words].

I am of the mind that wrapping is like the tires on a car. You can have a Ferrari or a worn-out bug. It doesn't matter. If the tires are not excellent, the car is worthless. That's where I am. I can't get the Ferrari to stay on the road or - and this is a perfect analogy - apply force in a straight line. The wrapping is the problem. Same issue with hanging - doesn't matter the product.

I find that vid hard to watch. The camera angle obscures things and is a bit too far away.

No offense to any creator of any product - but until wrapping is perfected, PE will tend to not be anywhere near as effective and efficient as it could be. Pretty frustrating.
 
BusterHymes;683765 said:
The problem I am having is with wrapping, and as it is said, 'grasping the internals'. What is happening is that the penis is escaping back into the bundle assembly underneath the skin. I have it clamped all the way down. I pull my skin back, wrap up (have tried it with only [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap and have tried it unwrapped as well), and leave the head and 1/2" (or more) of penis hanging out the front. Still it rides under the skin and the head escapes back and I lose [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words].

I am of the mind that wrapping is like the tires on a car. You can have a Ferrari or a worn-out bug. It doesn't matter. If the tires are not excellent, the car is worthless. That's where I am. I can't get the Ferrari to stay on the road or - and this is a perfect analogy - apply force in a straight line. The wrapping is the problem. Same issue with hanging - doesn't matter the product.

I find that vid hard to watch. The camera angle obscures things and is a bit too far away.

No offense to any creator of any product - but until wrapping is perfected, PE will tend to not be anywhere near as effective and efficient as it could be. Pretty frustrating.
Click to expand...

Have you tried the various wrapping options found in the Wrapping Forum? There are many to try. Personally I find Stillwantmore's version to be best for me which can be found in the Hanging Forum at Hanger Guide, I have used this method since Still made the thread and is works awesome.

Don't get to frustrated as you learn, every man who has received a [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words] has had a learning curve before mastery and you will too. Patience, practice and perfecting the method!
 
You have the new model [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] or old one? I have the older model and do just fine.
Definitely look in the hangers section for wrapping techniques. That's how I found my way to wrap.
What are you wrapping with anyways?
I use a thick surgical gauze, wrapped with a roll of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap and then a sweat wrist band. Works fine. It might be your girth. You have to get wrapping right and then the correct tightness for the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words]. It's tedious but you have to keep trying.
 
Might be. I'm thinking that my wrapping for this might need to be different than for my hanging. Not sure though.

For hanging (BIB) I just use sports pre-wrap and some [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words]. Not much of either. In hanging I do not make the wrap too tight. I am wondering if I need to tighten up here for the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words]?

Either way, I think it will come down to the wrapping. I need to get my penis to stop sliding in/out.

Thanks for the support, guys.
 
The way to wrap for a BIB hanger and the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] are extremely different. They grab in different ways so you have to relearn. Nothing harsh, just some time is all.
 
Cool. Any suggestions on wrapping principles specific to the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words], or what you've found is different for you?

Btw, I have the new version. Love it when I zone in. LOL the amount of angles I can get are incredible.

New version, sports pre-wrap and [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words]. That's my setup.
 
Something very comfortable for your first layer. I use medical gauze as it continues to get softer until it rips apart. Then [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap to get the thickness and a I use a sweat band after. I'm only 5.25 erect girth so I'm not as big as you. The problem is getting tight enough to hold well but not cut off circulation. It's trial and error because everybody is different. Put the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] on and tighten down, get in some light stretches and then tighten down again. That helps me. I also start my wrap about an inch past my circ scar.
 
I personally use this technique. I wrap theraban as a base wrap, two times around. After that I use [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ACE[/words] to secure the theraban and create a tight cushion for the chamber to tighten against. Leaving my glans and about .25" of shaft beyond the chamber being sure the wrap encases the top of the Bundle Chamber so the head will no slip back. No slippage in this for me and I hope it helped. There are many other styles of wrapping that can be found throughout the forum so I would go through tham and find one that works best for you. You may even create your own special wrap that you can add to our collection. I hope you can get the wrapping down and start stretching the shit out of that dick!
 
HAHA. Thanks guys. I have gotten a bit better at it. Trial and error. I honestly don't know why I fell into the PlugNPlay thing there for a sec. lol

I think the point that Running made was good - acclimatizing to it with light stretches and see how my penis reacts. And then there is an issue of material types, brought out in DLD's last post. So I'll have to think about that and work with it.

What I would like to do is isolate some of the important principles of wrapping to make it a shorter route for people in the future. If I'm going to bring anything to the table, that's what I think it would be.

My goal is to be able to get 15-20 stretches out of this without having to reset. I'm about 1/2 there right now. It's a work in progress.
 
You'll get there. I can keep mine on for 15-35 min depending on comfort and stretch intensity. If I don't get the wrap right and it doesn't work, I rewrap and start again. If it doesn't, I stop and wait a while to try again. I get irritated real easily lol. I'll sit in walmart looking in the medical aisle and fabric aisle to see what would do good. For me so far, is just what I use now
 
Oh man. I thought it was just me that did that.

Now I have to wonder a bit whenever I see a guy just cruising around looking at stuff in medical aisles!
 
Oh wow - salute to both of you. I've tried the yellow theraband underwrap with [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace[/words] overwrap and have to say it made a big difference.
 
BusterHymes;684214 said:
Oh wow - salute to both of you. I've tried the yellow theraband underwrap with [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace[/words] overwrap and have to say it made a big difference.
Click to expand...

YAY! I love when we get it right! Good work Brothers!
 
The wrapping suggestions have totally helped make the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] work and my hanging session quality has gone through the roof. Currently having unbelievable PE sessions.
 
BusterHymes;684945 said:
The wrapping suggestions have totally helped make the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] work and my hanging session quality has gone through the roof. Currently having unbelievable PE sessions.
Click to expand...

YAY! Another victory in the advice department! I love it more than anything when a Brother goes from frustration to success, it changes the whole game.
 
I'm exactly 1.25 inches less than you, and I have your exact problem. I observed the slipping occurring not between the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] and the wrap itself, but between my penis and the wrap. So I started wrapping tighter. I only do 30 min sessions in that beast, so I never really lose circulation. That has prevented any further slipping from occuring. Hope this helps!
 
MoreThanLuck;689788 said:
I'm exactly 1.25 inches less than you, and I have your exact problem. I observed the slipping occurring not between the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] and the wrap itself, but between my penis and the wrap. So I started wrapping tighter. I only do 30 min sessions in that beast, so I never really lose circulation. That has prevented any further slipping from occuring. Hope this helps!
Click to expand...

I hope it helps too, the last thing I ever want to see is someone going without gains. BusterHymes, I left you a message in another thread, please read, I want you to start a new program and get that length up.
 
Hmmm, which thread? The 10 [words=http://www.mattersofsize.com/join-now.html]mos[/words], no gain thread? Or another one. I did see it in the 10mos thread, I believe.
 
BusterHymes;690522 said:
Hmmm, which thread? The 10 [words=http://www.mattersofsize.com/join-now.html]mos[/words], no gain thread? Or another one. I did see it in the 10mos thread, I believe.
Click to expand...

Not sure now but I will bump it once I get to it.
 
You must log in or register to reply here.
Back
Top