Do vacuum hangers lower erection angle permanantly or temporarily?

[Neutralview]

Hey guys I wanna start hanging but I have a few questions before purchasing one. Do hangers such as the LG Hanger or the Vac hanger 3 ( I'm thinking of buying this one) lower a high erection angle.

My penis points at 11 o'clock I hate it bcoz it makes it look shorter then it really is in the mirror. I also have a 30° upward curve that I'm looking to correct ( I've ordered the X4 labs Peyronie's edition).

Anyway back to the Vacuum hanger I'm worried about buying the wrong size of cylinder/cone then it would shrink my glans ( I have quite a big glans a "mushroom head glans" and dont want it to shrink) :/ I'm speaking by experience well I haven't used a hanger but I have used the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] and I ordered the wrong size ( the cone was too small) after using it for several weeks I noticed my glans had shrinked when flaccid.

So my first question would a small cone/cylinder make my glans smaller? And secondly does hanging lower the erection angle?

Thanks in advance for your help

 

[Big Schwanz Acht]

phew! there's a lot going-on here and I'll let the veteran hangers chime-in. I prefer the low (point to the ground) erection angle and I'm not certain if it's the added weight from my girth gaining or the stretching of the suspensory ligaments (probably a bit of both), but my angle is definitely lower

 

[stillwantmore]

I did most of my hanging with between the cheeks angle. 2" gained, barely if any erection angle lost. BIB and later my own hangers used.

Why not email the maker of the vac hanger directly with your questions? I'm sure they'll answer them.

 

[DLD]

I did most of my hanging with between the cheeks angle. 2" gained, barely if any erection angle lost. BIB and later my own hangers used.

Why not email the maker of the vac hanger directly with your questions? I'm sure they'll answer them.

Same for me, made great gains, I have a much heavier penis but my erection able is the same as when I started (if not better) I give thanks to all my Kegel work.

 

[Neutralview]

phew! there's a lot going-on here and I'll let the veteran hangers chime-in. I prefer the low (point to the ground) erection angle and I'm not certain if it's the added weight from my girth gaining or the stretching of the suspensory ligaments (probably a bit of both), but my angle is definitely lower

OK so a penis hanger such as the LG Hanger can lower erection angle? What penis hanger were you using the Uvipe, VacHanger3 or the LG? I thought penis hangers ( whether compressed ones or vacuum ones) were only made to gain length and girth

I did most of my hanging with between the cheeks angle. 2" gained, barely if any erection angle lost. BIB and later my own hangers used.

Why not email the maker of the vac hanger directly with your questions? I'm sure they'll answer them.

I could email the maker of VacHanger3 but he's bound to give me biased views/opinions afterall he's there to sell his products. At least here on [words=http://www.mattersofsize.com/join-now.html]Mos[/words] the users aren't biased hence why I'm here.

My main aim is to lower my high erection angle like I said not to gain length or girth so could a vacuum based hanger lower my erection angle? I've read you can only weigh upto 20 lbs with the LG but with the MaleHanger you can hang weigh more and I think I need to hang above 20 lbs to stretch my ligaments. My suspensory ligaments are really stiff ( they're as strong as steel no joke) so what product would be the best to loosen my ligaments?

I have another question I've been doing this daily for a week what I do is I get my penis erect ( not 100%) then I just push it down as far as it will go but obviously not too hard as I don't wanna break my penis do you think by doing this it could lower my erection angle? Or should I stop doing it as there's a risk of injuring myself?

 

[DLD]

I would not worry on erection angle, if you are doing your Kegel work there is no fear of losing angle no matter how you gain.

 

[Big Schwanz Acht]

I would not worry on erection angle, if you are doing your Kegel work there is no fear of losing angle no matter how you gain.

I believe he'd like for the angle to 'relax' a bit but his lig's are extremely tight/strong

 

[stillwantmore]

Anyone selling anything, even hand made hemp bracelets at a flea market, is biased toward their product and wants you to buy it. It's called capitalism. Nothing wrong with that. I like to think I'm somewhat more balanced than some though. I'll come down as critical toward vacuum hangers for example, but I do so from my own experience with them. I've also told guys to buy whatever they like. There's plenty of a market out there and they're bound to either like what they buy elsewhere, or come back around to my product. Either way, they get what they want eventually.

 

[DLD]

I believe he'd like for the angle to 'relax' a bit but his lig's are extremely tight/strong

If the ligaments are tight to begin with and he stretches those short ligaments they will elongate and the angle will fall a bit.

 

[Neutralview]

Anyone selling anything, even hand made hemp bracelets at a flea market, is biased toward their product and wants you to buy it. It's called capitalism. Nothing wrong with that. I like to think I'm somewhat more balanced than some though. I'll come down as critical toward vacuum hangers for example, but I do so from my own experience with them. I've also told guys to buy whatever they like. There's plenty of a market out there and they're bound to either like what they buy elsewhere, or come back around to my product. Either way, they get what they want eventually.

I understand So anyway I was leaning towards the VacHanger3 or the LG Hanger but I've read people getting permanant ED and my main issue is the cone and the vacuum cup if I order the wrong size or if I pump to much ( using the hand pump the LG provide) can it make your glans smaller or make it shrink? Like I said I used the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] the cone was too small and my glans shrinked in size temporarily so I stoppped using it and thankfully my glans returned to it's normal size ( I have an average sized penis but my glans is quite big like a "mushroom head glans" so I don;t wanna lose having this)

Would the LG hanger BTC lower my erection angle or is 20 lbs too light to stretch my stiff/strong ligaments? How much weight would I need to loosen my stiff as steel ligs? What's the maximum weight you can hang with LG compared to the MaleHanger?

If the ligaments are tight to begin with and he stretches those short ligaments they will elongate and the angle will fall a bit.

But how do I do that? What product would you recommend to lower the erection angle? a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]penis [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words][/words] or a penis hanger?

 

[DLD]

But how do I do that? What product would you recommend to lower the erection angle? a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]penis [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words][/words] or a penis hanger?

Stretching the ligaments and doing no Kegel work, this will lower your angle as your PF Muscles will not be strong enough to facilitate the angle, hence it drops a it.

 

[Big Schwanz Acht]

Stretching the ligaments and doing no Kegel work, this will lower your angle as your PF Muscles will not be strong enough to facilitate the angle, hence it drops a it.

I never thought about fatiguing the PF having the affect o flowing the angle...perfect sense, tho

 

[DLD]

I never thought about fatiguing the PF having the affect o flowing the angle...perfect sense, tho

Yup, it is a terrible way to make this happen as it deals with weak eq but that is the only way to lower your angle.

 

[Neutralview]

Stretching the ligaments and doing no Kegel work, this will lower your angle as your PF Muscles will not be strong enough to facilitate the angle, hence it drops a it.

Ok but what device do I use to do this? The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size Genetics[/words] or the a hanger such as the LG or the Uvipe? So basically I need to hang weights ( quite heavy as I have hard as steel ligaments) to stretch and loosen my suspensory ligaments

On a personal note if you don't mind me asking why do you promote the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size genetics[/words] and not the X4 Labs? Do you think the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size genetics[/words] is more effective than the X4 Labs or are they the same?

 

[DLD]

Ok but what device do I use to do this? The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size Genetics[/words] or the a hanger such as the LG or the Uvipe? So basically I need to hang weights ( quite heavy as I have hard as steel ligaments) to stretch and loosen my suspensory ligaments

On a personal note if you don't mind me asking why do you promote the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size genetics[/words] and not the X4 Labs? Do you think the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Size genetics[/words] is more effective than the X4 Labs or are they the same?

[words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] is a much better [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] because of the materials they use and the milling they perform. When you do a side by side comparison the quality difference is extremely obvious, hence the lower pricing. I would offer the advice that you do both for good reason. There are two ways to train the ligaments, especially those that have tough ligs. One is long sets in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] at a at a good tension going an hour at a time. These longer sets will deliver gains that build off of the second part of my advice, hanging. In addition to long sets with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] short, heavy sets of manual or hanging would break down the tissue and the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] will cement and add to that.

 

[huge-girth]

Hey guys I wanna start hanging but I have a few questions before purchasing one. Do hangers such as the LG Hanger or the Vac hanger 3 ( I'm thinking of buying this one) lower a high erection angle.

My penis points at 11 o'clock I hate it bcoz it makes it look shorter then it really is in the mirror. I also have a 30° upward curve that I'm looking to correct ( I've ordered the X4 labs Peyronie's edition).

Anyway back to the Vacuum hanger I'm worried about buying the wrong size of cylinder/cone then it would shrink my glans ( I have quite a big glans a "mushroom head glans" and dont want it to shrink) :/ I'm speaking by experience well I haven't used a hanger but I have used the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] and I ordered the wrong size ( the cone was too small) after using it for several weeks I noticed my glans had shrinked when flaccid.

So my first question would a small cone/cylinder make my glans smaller? And secondly does hanging lower the erection angle?

Thanks in advance for your help

For your second question, if you hang your penis facing the ground, your erection angle will point to that direction as you gain.

 

[DLD]

To keep high erection angle kegels are so important