bathmate vacuvin mod..

B

bandit2010

Guest
Guys if you have not done the vacuvin mod on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words], I suggest you do it. All I can say is holly hell the expantion I got of just 2x5, I know someone that is going either be in trouble when she gets it, or she is going to love it.
 
Last edited:
chargains;727927 said:
I will definitely remember to try this mod when I finally get a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] lol
Click to expand...

Trust me my brother it is worth it, I normally pump to 5 1/2 to a 6 with the standard pip, with the mod I was pumping 6 1/2 to almost 7 inches, and expansion, so much I could almost not wrap my hand around it.
 
Using the wine vac mod is not only a great tool, it should be mandatory! I use it all the time and my penis looks so thick when it comes out of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words]. I've been PE religiously for a month now after many times of doing it here and there for a week or so. Last night I hit 6.5" base girth after being in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words]! Love the wine vac mod and everyone else should invest in it. It's usually under 10 dollars.
 
Krt919;727944 said:
Using the wine vac mod is not only a great tool, it should be mandatory! I use it all the time and my penis looks so thick when it comes out of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words]. I've been PE religiously for a month now after many times of doing it here and there for a week or so. Last night I hit 6.5" base girth after being in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words]! Love the wine vac mod and everyone else should invest in it. It's usually under 10 dollars.
Click to expand...

That's really inexpensive for a mod that has such profound effects! Would you guys say that it's basically a diy of the hand-pump bulb that comes with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words]? It seems that way to me.
 
I doubt the hand bulb would be as strong. I like seeing mods like this come along, but be careful. Even with water pumping, you can use too much vacuum and I'm sure none of you have a guage on your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] to show you how high the vacuum is.
 
stillwantmore2;727972 said:
I doubt the hand bulb would be as strong. I like seeing mods like this come along, but be careful. Even with water pumping, you can use too much vacuum and I'm sure none of you have a guage on your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] to show you how high the vacuum is.
Click to expand...

yeah I know what you mean, just ordered a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] from x4 labs.
 
bandit2010;727976 said:
yeah I know what you mean, just ordered a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] from x4 labs.
Click to expand...

definitely let us know what you think about it after some time using it.
 
stillwantmore2;727972 said:
I doubt the hand bulb would be as strong. I like seeing mods like this come along, but be careful. Even with water pumping, you can use too much vacuum and I'm sure none of you have a guage on your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] to show you how high the vacuum is.
Click to expand...

The Vin-Vac is better than the hand ball by most accounts.
 
yeah I am curious what kind of vacuum it will pull, wish I still had my vacuum gauge set
 
It honestly wouldn't surprise me that the vacvin is capable of creating more pressure. Hand bulb pumps aren't exactly known for their ability to provide substantial pressure in comparison to other hand pump methods.
 
Can you guys explain how to do the mod? Do I need the [words=http://TLCTugger.com/MOS]TLC[/words] skin cone or is there a way to do it without it? And what size? 50 or 52? For either [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words]. Thank you to anyone who offers to help.
 
arkailija;728123 said:
Boom: http://www.mattersofsize.com/forum/penis-enlargement-pumping-forum/89505-bathmate-and-penomet-the-vacu-vin-modification-clarification.html

Hope it helps, be careful with the mod; the force is strong with this mod!
Click to expand...
Awesome. Thanks. Wow, this is the third method I've seen so far. So do I have to bore out or cut or do anything to the stopper cork or can I just leave it the way it is? I would prefer to not do anything to it because I actually use these for wine on occasion.
 
JB007;728134 said:
Awesome. Thanks. Wow, this is the third method I've seen so far. So do I have to bore out or cut or do anything to the stopper cork or can I just leave it the way it is? I would prefer to not do anything to it because I actually use these for wine on occasion.
Click to expand...

All I did was removed the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve, (it just pops-off if you pry gently) and replaced it with the VV cork...it almost fits perfectly, but I used a rubber washer to hold it in-place while it's upside-down during fill-up. Once you're mounted and have a decent seal, the VV cork won't budge and you can pump-away until you feel like you're going to explode
 
Big Schwanz Acht;728141 said:
All I did was removed the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve, (it just pops-off if you pry gently) and replaced it with the VV cork...it almost fits perfectly, but I used a rubber washer to hold it in-place while it's upside-down during fill-up. Once you're mounted and have a decent seal, the VV cork won't budge and you can pump-away until you feel like you're going to explode
Click to expand...

Easy!
 
JB007;728134 said:
Awesome. Thanks. Wow, this is the third method I've seen so far. So do I have to bore out or cut or do anything to the stopper cork or can I just leave it the way it is? I would prefer to not do anything to it because I actually use these for wine on occasion.
Click to expand...

Hi there!

Boring out the cork is just for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words]. With [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] you'd use the fat O-ring type cockring as a sealer.

BUT ! ! !

I had a session today, just playing around, both pumps within my reach.
So, what I found out is that you can actually just take the top of the cork and place the top on the valve; it sits quite well and then you just gently make the connection with the Vacu-vin!

It's damn dark now and I don't have good lighting, but I could post a picture of that solution. (Tomorrow, I'll post to the "modification clarification" thread.)
Worked pretty damn well for me; just the really last pumps (I was pumping hard) the cork top wanted to dive inside the Vacu-vin pump, but overall it worked very well.
I was laughing out loud how it worked so easy!

PS. I think the one I bought came with three corks, so one could be just for PE use, but I do see your point; I've used it for wine few times, but more often I'm a beer / whiskey / rum person.

Edit; Rather than posting one more post, here's the link to my thread; http://www.mattersofsize.com/forum/penis-enlargement-pumping-forum/89505-bathmate-and-penomet-the-vacu-vin-modification-clarification.html
 
Last edited:
Big Schwanz Acht;728141 said:
All I did was removed the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve, (it just pops-off if you pry gently) and replaced it with the VV cork...it almost fits perfectly, but I used a rubber washer to hold it in-place while it's upside-down during fill-up. Once you're mounted and have a decent seal, the VV cork won't budge and you can pump-away until you feel like you're going to explode
Click to expand...
So can you still pump first to get a good seal before you have to use the vacu-vin? Or do you only use the vacu-vin to create suction?
 
You can pump first without the Vacu-vin if you want to to. Then you can add the ring (or the corktop) and use the Vacu-vin to create more suction.

Both ways work. Nowadays I usually might start creating the suction with the Vacu-vin from the start, but surely I could do the initial suction with just the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words].
Matter of a preference, I would say.
 
arkailija;728398 said:
You can pump first without the Vacu-vin if you want to to. Then you can add the ring (or the corktop) and use the Vacu-vin to create more suction.

Both ways work. Nowadays I usually might start creating the suction with the Vacu-vin from the start, but surely I could do the initial suction with just the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words].
Matter of a preference, I would say.
Click to expand...

Good to know. I'm waiting a while before I do the mod. I've found if I can keep as much water as possible in while sliding the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] on that I get far better suction from the start. As soon as I feel I'm not getting enough power out of it the mod goes on.
 
If we were to carry one version of the Wine-Vac which version do y'all think best. I may be able to strike a deal for us.
 
arkailija;728398 said:
You can pump first without the Vacu-vin if you want to to. Then you can add the ring (or the corktop) and use the Vacu-vin to create more suction.

Both ways work. Nowadays I usually might start creating the suction with the Vacu-vin from the start, but surely I could do the initial suction with just the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words].
Matter of a preference, I would say.
Click to expand...
I was referring to big schwanz' post about completely removing the valve and using the wine vac that way. Can you still pump first to get a good seal before using the winevac or do you have to use the wine vac from the start?
 
JB007;728451 said:
I was referring to big schwanz' post about completely removing the valve and using the wine vac that way. Can you still pump first to get a good seal before using the winevac or do you have to use the wine vac from the start?
Click to expand...

I havent had a issue and I completely removed the valve, put the cap back on and stretched it over it.
 
The WineVac cork uses the same one-way valve principle as The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve, so you're able to get a seal w/out using the hand-held pump, but I'm not sure why you'd want to. The VV cork could also dislodge itself from the tip of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] since it only utilizes compression from a rubber washer to keep it in place. So...this is how I do it: (I've only used this in the shower, btw)
Fill my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] with warm water from the shower and place it against my body, holding it in the middle with my left hand, (I'm right-handed) and with my right hand, place the hand pump on the cork. I have to move my left hand higher toward the tip so I can steady the cork while I'm pumping w/my right hand. It requires a bit of dexterity, but once you get the hang of how to hold it against your pelvis while keeping the VV cork steady/straight it's very simple. After a few pumps, the seal is tight-enough to go hands free which enables you to conduct your 'normal' shower duties. It's also very simple to add/reduce pressure incrementally in order to find just the right amount of 'pain', lol
 
doublelongdaddy;728498 said:
Would any of these vacuum pumps be better than what we are using now? Any benefits to an electronic pump?

Electric Wine-Vacuums
Click to expand...

I don't know , but I do know one thing the wine back I had I am maxxing out with pressure at 7 inches, and it is intense.
 
doublelongdaddy;728498 said:
Would any of these vacuum pumps be better than what we are using now? Any benefits to an electronic pump?

Electric Wine-Vacuums
Click to expand...

Personally, I prefer the control with doing it by hand...I could see getting flustered and not being able to shut the pump off fast enough and end-up with a 'blow'd-up d!ck' (cartoon style)
 
bandit2010;728511 said:
I don't know , but I do know one thing the wine back I had I am maxxing out with pressure at 7 inches, and it is intense.
Click to expand...

What are you starting with? As in are you gaining 1/4" EL or 3/4" or more or less? And how much more are you getting with the winevac mod vs before?


It looks like I'm getting about 1/4" extra while pumping (no WV mod on mine), more if I'm able to pump after stretching. I dunno if I should be getting more than 1/4" temporary length from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] or not.
 
cladre60;728564 said:
What are you starting with? As in are you gaining 1/4" EL or 3/4" or more or less? And how much more are you getting with the winevac mod vs before?


It looks like I'm getting about 1/4" extra while pumping (no WV mod on mine), more if I'm able to pump after stretching. I dunno if I should be getting more than 1/4" temporary length from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] or not.
Click to expand...

with that wine vac mod I am seeing 1/2 to 3/4 of a inch of length gain, far as girth I am gaining a 1/2 to a 1'' of girth post pump, which puts me at 5 1/2 to 6'' girth post pump.
 
bandit2010;728567 said:
with that wine vac mod I am seeing 1/2 to 3/4 of a inch of length gain, far as girth I am gaining a 1/2 to a 1'' of girth post pump, which puts me at 5 1/2 to 6'' girth post pump.
Click to expand...

Damn, good to know.
 
bandit2010;728567 said:
with that wine vac mod I am seeing 1/2 to 3/4 of a inch of length gain, far as girth I am gaining a 1/2 to a 1'' of girth post pump, which puts me at 5 1/2 to 6'' girth post pump.
Click to expand...

Awesome!
 
bandit2010;727916 said:
Guys if you have not done the vacuvin mod on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]bathmate[/words], I suggest you do it. All I can say is holly hell the expantion I got of just 2x5, I know someone that is going either be in trouble when she gets it, or she is going to love it.
Click to expand...

I believe there is no difference between the vacuvin mod and the extreme pumps though I've never tried to use my vacuvin mod
 
huge-girth;759279 said:
I believe there is no difference between the vacuvin mod and the extreme pumps though I've never tried to use my vacuvin mod
Click to expand...

Difference is two fold

Vin Vac is inexpensive saving you over $100 on a Extreme. Wine Vac costs about $10.

Next, the Vin Vac gives so much more intensity than the Extreme.
 
doublelongdaddy;759442 said:
Difference is two fold

Vin Vac is inexpensive saving you over $100 on a Extreme. Wine Vac costs about $10.

Next, the Vin Vac gives so much more intensity than the Extreme.
Click to expand...

I keep reading everywhere that the Vin vac gives so much intensity but since I have a total of 3 pumps, I never had the chance to use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] that came with the Vin Vac
 
huge-girth;759585 said:
I keep reading everywhere that the Vin vac gives so much intensity but since I have a total of 3 pumps, I never had the chance to use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] that came with the Vin Vac
Click to expand...

I don't understand, what do you mean?
 
once you give the Vacuvin a try, it will all become very clear...it literally increases the negative-pressure exponentially over a stock [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] and is even stronger than The Extreme
 
doublelongdaddy;759607 said:
I don't understand, what do you mean?
Click to expand...

Remember I won one of the monthly contest back in 2016 and I received the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]? Fast forward to 2017, I sent you some money and you helped me buy two [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] extreme, you also bought the Wine Vac for me because I told you I needed it for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] I won back in 2016. I've never used the wine vac and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] I won. I have only used one of the 2 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] extreme you bought for me.

I have two [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] extremes and one normal [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] with a wine vac. But I've only been using one of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] extreme. This is what I mean
 
Big Schwanz Acht;759624 said:
once you give the Vacuvin a try, it will all become very clear...it literally increases the negative-pressure exponentially over a stock [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] and is even stronger than The Extreme
Click to expand...

I will get to use it some day but I don't see it happening anytime soon.
 
huge-girth;759682 said:
I will get to use it some day but I don't see it happening anytime soon.
Click to expand...

You might as well build it in the meantime so it is ready when you are ready for girth.
 
doublelongdaddy;759769 said:
You might as well build it in the meantime so it is ready when you are ready for girth.
Click to expand...

Yes I know but right now I just don't have the willingness to touch any of my pumps because it is all about length for now. But as soon as it's time for me to start girth work, I will build it.
 
huge-girth;759838 said:
Yes I know but right now I just don't have the willingness to touch any of my pumps because it is all about length for now. But as soon as it's time for me to start girth work, I will build it.
Click to expand...

"If you build it they will come" :)
 
I would like to try this Vacuvin mod out on my x30 Extreme..I can get the V-Wine saver locally but is the TLC Skin Cone also needed for this to properly work ..I had a e-bay link for this but they are sold out..
 
The Skin Cone helps but it isn't necessary! You can use a fat O-ring type cockring as a sealer.
I don't know though if you need the mod if you have the Extreme; the pressure maxed with the ball-pump of Extreme is about the same as the Vacu-Vin maxed out, in my experience. The Vacu-Vin is a bit more robust though, my ball is actually quite damaged, it still works, but it isn't as solid as the Vacu-Vin.
 
So you think the pressure is close to the same as the pressure made with the x30 Extreme's Ball hand Pump you think..
 
NIK1;n1815683 said:
So you think the pressure is close to the same as the pressure made with the x30 Extreme's Ball hand Pump you think..
Click to expand...

Yes, that is how I've experienced it. Once you reach the "click" which is a feature with certain Vacu-Vin models, there's no more pressure to be created. And that "click" point, I've experienced it few times and it's actually too much. And with the ball pump of Extreme I can attest that I've reached that "click" point as well.

The Vacu-Vin is a bit more robust in my opinion. The hand ball pump of Extreme has several parts; for example the top on my ball pump comes off way too easy, as it's slightly damaged. But power wise, both can reach that high point which can be too much, especially for more than a minute or so.
It's not like regular pumpers only pump to extremely high numbers, it's usually a combination of cycling between higher and lower pressures. And in a way that can be utilized in hydropumping as well. Although, the 5x5x3 program helps out with that.
But it's not as you'd get the highest suction by the same second you enter the pump. Gradual build-up is better in many things!
 
You must log in or register to reply here.
Back
Top