Have e-mailed auto [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words].com three times with no reply. Have they discontinued business?
auto extender.com
- Thread starter ballpumper
- Start date
No, they just tend not to respond. I sent 'em about a dozen and they never replied to them. You can bet they replied when I returned that POS...
harmonic169 said:
You sent me a dozen email? I don't come to this site often, but I usually reply to private emails fairly quickly. If you want to return the product, just let me know.
Ballpumper, I'm not sure if you are one of the emailer that I keep responding back, but get email not deliverable message. There are only couple of people that I'm having problem emailing back.
I was going to interject into this thread earlier, since I've heard nothing but good things about the customer service from Monkeybar and crew. They are some of the best people to deal with from what I understand. I will be ordering from them sometime in the next few months. It's a great product and worth while to purchase from all the reviews I've seen, but like anything else Penis Enlargement related it takes time.
Monkeybar, When is the ADH going to be rereleased?
Monkeybar, When is the ADH going to be rereleased?
All right, here is the truth on AutoADH. I've been slacking off. After the last redesign (autoEXT), I was completely exhausted. So I've been just trying to find time to just relax - which is hard to come by as I have a regular job also. Well I got the relaxing part taken care of in last few weeks and I'm back on designing.
For those who don't know, the AutoADH is changing quite a bit. One of the problem that I had (I'm a user too) was that when sitting down, the weight just hang on the chair. Since I work in office environment, this is pretty much all day, which defeat the purpose of a weight based system.
So I took it off voluntarily because I didn't think it was good enough to be [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] - plus I wanted more comfort so that I don't have to take a break so often.
The new system will be more of a strap based system (still could use the weight) that could be attached to knee or waist (still working on it).
I got the head part all worked out - now I'm concentrating on the strap part. I would guess end of August/early Sept as best guesstimate.
Hope this helps.
For those who don't know, the AutoADH is changing quite a bit. One of the problem that I had (I'm a user too) was that when sitting down, the weight just hang on the chair. Since I work in office environment, this is pretty much all day, which defeat the purpose of a weight based system.
So I took it off voluntarily because I didn't think it was good enough to be [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] - plus I wanted more comfort so that I don't have to take a break so often.
The new system will be more of a strap based system (still could use the weight) that could be attached to knee or waist (still working on it).
I got the head part all worked out - now I'm concentrating on the strap part. I would guess end of August/early Sept as best guesstimate.
Hope this helps.
Bump*
Monkeybar, ..... !
Do you produce your own base rings?
In addition to better attachment methods, the whole idea needs a larger base unit too, or at least a couple of sizes. The one for [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] has a maximum inside diameter of 1.73", which puts it at a 5.43 circumference (at the base!) before squeezing the hell out of you if you ever even -think- about not being flacid.
Another base ring option at say 2.15" I.D., for a way larger 6.75" max circumference, would be really sweet.
One of the concepts with persistant [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] is that you're supposed to get some girth gains (for free basically) along with the length gains. -- And I can't express just how half-assed I've gone about Penis Enlargement until about a month ago. It's my opinion that most of my girth gains so far have been freerider on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words].
Until you progress beyond the base units' ability to deal with you - then, IMO, you just get more length with less or even no gains in free girth.
I'd discussed this with [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster[/words] some time ago, they were very polite but expressed that they only have the one size. Actually I think they were bewildered by the question. Even though, like spinaltap's amps, they go to 11 ... it's really a medical device for people that are more like 3 or 4 and the Penis Enlargement for ridiculous thudliness uses of it is a more recent phenomenon.
The 5.43 base ring doesn't allow for people who are really taking off, it becomes the limiting factor in comfort and probably in free girth as well.
Thoughts? Solutions? Links? Anyone...?
Hey, you sold me on using paypal's visa function for the modified head. I'll do that in the next day or so.
*
Monkeybar, ..... !
Do you produce your own base rings?
In addition to better attachment methods, the whole idea needs a larger base unit too, or at least a couple of sizes. The one for [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] has a maximum inside diameter of 1.73", which puts it at a 5.43 circumference (at the base!) before squeezing the hell out of you if you ever even -think- about not being flacid.
Another base ring option at say 2.15" I.D., for a way larger 6.75" max circumference, would be really sweet.
One of the concepts with persistant [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] is that you're supposed to get some girth gains (for free basically) along with the length gains. -- And I can't express just how half-assed I've gone about Penis Enlargement until about a month ago. It's my opinion that most of my girth gains so far have been freerider on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words].
Until you progress beyond the base units' ability to deal with you - then, IMO, you just get more length with less or even no gains in free girth.
I'd discussed this with [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster[/words] some time ago, they were very polite but expressed that they only have the one size. Actually I think they were bewildered by the question. Even though, like spinaltap's amps, they go to 11 ... it's really a medical device for people that are more like 3 or 4 and the Penis Enlargement for ridiculous thudliness uses of it is a more recent phenomenon.
The 5.43 base ring doesn't allow for people who are really taking off, it becomes the limiting factor in comfort and probably in free girth as well.
Thoughts? Solutions? Links? Anyone...?
Hey, you sold me on using paypal's visa function for the modified head. I'll do that in the next day or so.
*
Asanon said:Bump*
Monkeybar, ..... !
Do you produce your own base rings?
In addition to better attachment methods, the whole idea needs a larger base unit too, or at least a couple of sizes. The one for [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] has a maximum inside diameter of 1.73", which puts it at a 5.43 circumference (at the base!) before squeezing the hell out of you if you ever even -think- about not being flacid.
Another base ring option at say 2.15" I.D., for a way larger 6.75" max circumference, would be really sweet.
One of the concepts with persistant [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] is that you're supposed to get some girth gains (for free basically) along with the length gains. -- And I can't express just how half-assed I've gone about Penis Enlargement until about a month ago. It's my opinion that most of my girth gains so far have been freerider on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words].
Until you progress beyond the base units' ability to deal with you - then, IMO, you just get more length with less or even no gains in free girth.
I'd discussed this with [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster[/words] some time ago, they were very polite but expressed that they only have the one size. Actually I think they were bewildered by the question. Even though, like spinaltap's amps, they go to 11 ... it's really a medical device for people that are more like 3 or 4 and the Penis Enlargement for ridiculous thudliness uses of it is a more recent phenomenon.
The 5.43 base ring doesn't allow for people who are really taking off, it becomes the limiting factor in comfort and probably in free girth as well.
Thoughts? Solutions? Links? Anyone...?
Hey, you sold me on using paypal's visa function for the modified head. I'll do that in the next day or so.
*
Everything is made in our shop. The base ring is not perfectly round, rather its elongated for better anatomical fit. The ID is 1 7/8 (almost 2") by 2 1/8" (long way). The base was made larger from last redesign. Also, the bottom of the base is curved up - to give more play room near the scrotom.
Believe it or not, I'm further redesigning the base. I made a silicone base while ago, but it didn't fit quite right and it was more of a hassle - so I never sold it. This redesign is to fit the silicone base better - no change to size or shape.
MONKEYBAR, when are the redesings going to be complete?
.
Ok, ....
Early review:
That has to be the fastest I've ever received an order from anyone. It'd would have literally been another 5 or 6 days before I'd even begin to wonder about it.
Nice job.
The modified head seems too large at first, but I think that's mainly because other designs are more "two-dimensional" and this one is more "three-dimensional", which it has to be. Trimming it down would just make it weak.
Its attachment distance is 2" shorter than the particular style of [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] head I was using before. I wouldn't want to have to trade heads constantly, but it's an easy rod swap -- a 4" pair (of 3+1) for a 2" pair.
The silcone wrap ... is ... Brilliant. (!!!) Accept no substitutes. Anyone hanging or stretching without this wrap stuff is missing out on comfort And grip.
I may end up securing the head with a 'bread-tie' instead of the rubber bands. The bands do a surprisingly good job but all the playing around with myself getting into the wrap, head, and rubber bands is giving me enough wood that the little PM base unit is choking me out.
Without the wrap, definitely a bread-tie, with the wrap (the clamping gap is larger) may go with the rubber bands.
Looking forward to trying the silicone wrap with the PM head too. I can already see it's going to be far more comfortable and secured from slipping.
Nice job all around. I'm impressed.
:clap:
*
Ok, ....
Early review:
That has to be the fastest I've ever received an order from anyone. It'd would have literally been another 5 or 6 days before I'd even begin to wonder about it.
Nice job.
The modified head seems too large at first, but I think that's mainly because other designs are more "two-dimensional" and this one is more "three-dimensional", which it has to be. Trimming it down would just make it weak.
Its attachment distance is 2" shorter than the particular style of [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] head I was using before. I wouldn't want to have to trade heads constantly, but it's an easy rod swap -- a 4" pair (of 3+1) for a 2" pair.
The silcone wrap ... is ... Brilliant. (!!!) Accept no substitutes. Anyone hanging or stretching without this wrap stuff is missing out on comfort And grip.
I may end up securing the head with a 'bread-tie' instead of the rubber bands. The bands do a surprisingly good job but all the playing around with myself getting into the wrap, head, and rubber bands is giving me enough wood that the little PM base unit is choking me out.
Without the wrap, definitely a bread-tie, with the wrap (the clamping gap is larger) may go with the rubber bands.
Looking forward to trying the silicone wrap with the PM head too. I can already see it's going to be far more comfortable and secured from slipping.
Nice job all around. I'm impressed.
:clap:
*
REDZULU2003
Well-known member
Is the autoEXT a good piece of kit than guys
Sorry haven't posted in a while. I just want to let everyone know, the autoball ball stretcher is almost ready - sorry for the delay.
I'm working on several new products and here's are some detail,
New hanger/clamper/extender. The original idea came from Big Girtha from Thunders. The original idea was to create a easy to use clamper (instead of cable clamp) - so that you don't have to use a wrap and is wider in size. From there, we moved to multi-purpose idea.
The basic shape is now done - the only thing I'm working on is the fastening mechanism. This will not use rubber band - rather, a racheting system like the cable clamp. Originally, we envision that this could be used for clamping, hanging, extending and [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words], but [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] portion cannot be done due to the size required for heavy hanging. We'll leave that to AutoADS. I'm hoping hanging part will be 10-15lb range.
The 2nd product I'm working on is a universal wrap/sleeve. I'm developing this for uncut folks. They seem to have a tougher time due to sensitivity. I'm hoping that this new sleeve will help them stretch longer.
The 3rd product is SuckXtender - this will take a while as I'm having issue with the fluid build up. As with most vacuum based device, the fluid build up is a serious consideration. The other thing is the stress point of the pull - the vacuum based product mainly pulls the head and front half of the shaft. This does not pull the ligs as much, so I'm trying to figure out how to pull the ligs more from this device.I'm trying out several different version and hope one of them is good enough (or it may never happen).
Cheers.
I'm working on several new products and here's are some detail,
New hanger/clamper/extender. The original idea came from Big Girtha from Thunders. The original idea was to create a easy to use clamper (instead of cable clamp) - so that you don't have to use a wrap and is wider in size. From there, we moved to multi-purpose idea.
The basic shape is now done - the only thing I'm working on is the fastening mechanism. This will not use rubber band - rather, a racheting system like the cable clamp. Originally, we envision that this could be used for clamping, hanging, extending and [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words], but [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] portion cannot be done due to the size required for heavy hanging. We'll leave that to AutoADS. I'm hoping hanging part will be 10-15lb range.
The 2nd product I'm working on is a universal wrap/sleeve. I'm developing this for uncut folks. They seem to have a tougher time due to sensitivity. I'm hoping that this new sleeve will help them stretch longer.
The 3rd product is SuckXtender - this will take a while as I'm having issue with the fluid build up. As with most vacuum based device, the fluid build up is a serious consideration. The other thing is the stress point of the pull - the vacuum based product mainly pulls the head and front half of the shaft. This does not pull the ligs as much, so I'm trying to figure out how to pull the ligs more from this device.I'm trying out several different version and hope one of them is good enough (or it may never happen).
Cheers.