Although i already own a sizegenetics, i find it uncomfortable to wear and when adjusting the rods there is a lot pinching of skin. After browsing on the net i came across the male edge extender which is produced by the jes extender people. I just want to know if any members have any experiance with it and is it any good. The fact that it's made of plastic and doesn't weigh much makes me think it should be comfortable to wear for long periods.
Has anyone used the Male edge extender.
- Thread starter seek_info
- Start date
- Joined
- Jun 3, 2003
- Messages
- 20,066
I had allot of interest in wanting to try it but was told its a piece of shit and keeps snapping. I do not know and can only go off what I was told. It looks stylish though thats for sure.
- Joined
- Jun 3, 2003
- Messages
- 20,066
Thats bad ass
Wow had no idea. Looks very good though. Well i guess back to trying to figure out the sizegentics. How do you guys attach the front piece to the rods after securing the penis, it's tha main problem i am having.
- Joined
- Jun 3, 2003
- Messages
- 20,066
I nearly had a very good deal with the makers of the Male Edge to offer it for MOS members, along with the Size Genetics side by side but I didn't get prompt responses from the Sales Manager at Male Edge, which makes me wonder if the service could be relied upon.
- Joined
- Jun 3, 2003
- Messages
- 126,803
seek_info;416721 said:
It looks great, I thought so too, but it is literally the cheapest, plastic piece of shit. Save yourself the grief and waste of money, get a SizeGenetics.
- Joined
- Feb 26, 2011
- Messages
- 473
seek_info;416592 said:
I'm using it, but only for about 10 days now so can't really give it a full review and wouldn't til the 6 month mark. I got the pro one-which I do question that, I think I got a couple extra straps which are likely worthless since everyone says velcro mod is the way to go and I think it came with a DVD instead of just the instruction booklet-the DVD I think you can watch on their site so I don't see the benefit of that either. The device itself is the same for all 3 of their models, just different colors-so I recommend buying the cheapest model if you buy one, the benefits of the next two models seem pretty bogus.
Pros: #1 It's really easy to change the settings to increase the tension. To decrease tension you have to disconnect the part that attaches to the penis head from the base, but that too is pretty easy. To increase tension you simply move each bar forward one notch, there are about 8 notches-which indicates it would only get a little harder once you got to #8... then the head piece would have to be moved forward to a different notch. So this is the big plus over SG that I see-as SG has all these pieces and it looks like to change tension, you have to take it off, and add a new piece in by screwing it or something? Definitely more complex.
#2 It's definitely lighter, but I doubt there is much of a comfort difference.
#3 cheaper, I think the cheapest one is under $200, but maybe not-I thought I read here you could get SG for $165? If so, move this one to a con
Cons: #1 Definitely a device with cheaper parts than SG, as ME is plastic and SG is metal-but I still think that part is a plus as ME is easier to adjust-I'd just say from what DLD said, you better be more careful with it as it's probably made in China or something (95% plastic).
#2 Website kinda sucks-the forum is pretty weak and no experts or site people answer the questions it looks like. Perhaps DLD should put a link on that site to his site-where answers can be found?
Either way, I like it so far and frankly I'm glad I don't have metal parts that screw together around my dick-I bet you accidentally pinch yourself occasionally and penises like soft, warm, wet things, not cold, hard, sharp things
But we'll see how it goes-I started a thread to comment on it as time goes on and to log gains-so far it sounds very similar to SG as far as effectiveness and clearly the technology is the same. Oh ya, if it makes a difference, I believe the Jes Extender people made Male Edge too.- Joined
- Jun 3, 2003
- Messages
- 20,066
- Joined
- Feb 26, 2011
- Messages
- 473
REDZULU2003;419212 said:
Well-there's enough tension to feel it. There is a plastic indicator with marks to tell you how many grams you are at. There are 4 lines down by the base that measure tension, 1 is 800g, which is where you start. 2 is 1200, 3 is 2000, 4 is 2800 and I imagine you wanna be real careful after that since you wouldn't know how much tension you are adding. I never used the Jes Extender so can't answer your question (this is the only extender I've ever used), but I do know it said it would work for a 2 inch dick (you just turn the headpiece around so it's about 3" closer to the base) and up to 11", which is well beyond what I want
I don't want a redonkulous donkey dick, just a good Peter North sized dick lol. Anyway, I'll add updates as time goes on, but so far I like it a lot and haven't pinched myself once since day 1. On day 1 I didn't use any wrap so when I pulled the strap through, it naturally pulled some shaft skin with it-but the bars themselves have never pinched me once. I need to check out this velcro mod as that dude was hard core and clearly put some thought into it-maybe I'll go to Walmart when I'm done with work tonight.
Last edited:
Service at the Maleedge is up to the best standards, as with our other product the Jes-Extender.
As for the comments above on "breaking" and "piece-of-shit" we cannot recognize this, we are selling globally in +150 countries from our webshop, and have very few return with comments on bad product quality.
I hope potential misunderstandings can be cleared up.
Best, Klaus, MaleEdge.
As for the comments above on "breaking" and "piece-of-shit" we cannot recognize this, we are selling globally in +150 countries from our webshop, and have very few return with comments on bad product quality.
I hope potential misunderstandings can be cleared up.
Best, Klaus, MaleEdge.
Hi guys - "properbly made in China" = no. Like with our Jes-Extender the MaleEdge is made in Denmark, for reasons of product quality and abillity to controll everything we do in our production proces.
As for the website and the forum being weak I could possibly agree, we need still to have external administrators to step in and possibly help us monitor and discuss etc. Anybody interested please contact us.
Best, Klaus at MaleEdge.
As for the website and the forum being weak I could possibly agree, we need still to have external administrators to step in and possibly help us monitor and discuss etc. Anybody interested please contact us.
Best, Klaus at MaleEdge.
- Joined
- Jun 3, 2003
- Messages
- 20,066
Good to have a representative to come here and speak about the product.
- Joined
- Mar 25, 2011
- Messages
- 26
Maleedge;421894 said:
So the two biggest complaints about the Male Edge are:
1] That it snaps - what exactly snaps?? Is it the actual rods on the device? is it the curved see-through plastic section at the base of the rods where they connect to the base? Or is it the rubber bands??
2] Very little support from the administrators of Male Edge website forum.
3] Some people say the Male Edge is a cheap piece of shit. It's not cheap for me and I want something that won't break.
Can Male Edge guarantee that the plastic rods won;t break? Has anyone had a bad experience where the plastic rods actually broke?!!?! That would make the device totally useless?!
- Joined
- Jun 3, 2003
- Messages
- 126,803
dangledongdave;422415 said:
Go for a SizeGenetics, it is made from surgical steel and medical quality plastic...it will never break. The MaleEdge to me feels like a pez dispenser, the tracking pegs are week and becomes stripped very easily, this is where my MaleEdge broke.
- Joined
- Feb 26, 2011
- Messages
- 473
dangledongdave;422415 said:
The only breakage I've had is on the straps. They snap if you pull too hard and I think being careful or switching to velcro mod solves this problem. I also complained recently - and they said they would send me replacements for free (which they better, they charge $30 per strap if you count shipping-good god!!). So I'll report back on how I'm treated on that issue once resolved.
On DLD's issue-I do notice that the pegs (on the inner rod) are different on each side. ie if I have the outer tube on the wrong side, they won't click in and it does indeed act stripped. But then you rotate it 180 degrees so the right pegs are facing the right holes and it snaps as good as on day 1. So I was wondering if it was possible that you never turned them around to notice this. I see no wear on my pegs and so far I would estimate this should last a very long time, easily the 6 months (and again, it BETTER because it is NOT cheap in price!).
I don't see any bending on the rods or hinges or any stressed parts when I have it even at 2800g which is getting close to the max tension here. I do think the rods or elbow (clear pieces you described) could certainly break with enough force-but I mean like accidentally stepping on the thing and so forth and this would be true with any odd shaped thin piece of plastic in my opinion.
Hope that helps.
Yes, I have currently been using the male edge for 6 weeks now. Here is a list of issues. 1) the device head "pops" off the arms during increased tension. 2) the plastic peice inside the arm which allows for tension adjustment and elongation keeps popping off 3) because of #2 the peice inside that I referred to has broke so now when you go to take the unit off, the whole arm slides out. All of this on top of horrible customer service ( 4 unresponded to emails in over 9 days) makes this product a piece of shit. I agree with doc that the design is awesome just that that they failed miserably during production
Similar threads
- Sticky
- Sticky
