Wow....You would’ve had every piece of equipment for the money that you spent. I’m so sorry didn’t see the special. As far as installments are concerned I’ll run that by lightning I think I’ve already asked him before and he said it couldn’t be done but no harm in asking again
For me, so far the manuals and Silistretcher are doing the job with guidance you guys have given me.
I’m just considering other tools for later to have full potential for growth.
 
This routine which was originally designed for the sizegenetics extender, can be modified to go with the silistretcher. All I would recommend is taking the times from the following routine, and use those as a guide when you start to use the silistretcher.

Its a good way to get used to the device, and become more accustomed to its strengths.

Pasting several good [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetic[/words] or alternative [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] routines for all to use. Many questions asked about routines for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] and I hope these routines can assist you all.

Routine #1

Week 1


Day 1 - It's recommended that you start at the lightest setting possible at first. Though the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] can be worn under clothing, you should train with your penis in plain view at all times to get used to the feeling of wearing the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] and to avoid any possible cutting off of circulation. This should be done for the first week of training, if possible.


Your goal for today is to stretch your penis for 45 minutes in 3 sessions of 15 minutes each. If you can, try to adjust your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] so that your penis is pointing straight down. Your stretch should feel pleasant and fairly tight. At the end of the day, check for soreness and irritation. Take Day 2 off.


Day 3- Your goal for today is to stretch your penis for 1 hour and 40 minutes in 4 sessions of 20 minutes each. Though this seems a big jump over the amount of time stretched on Day 1, your penis and ligaments should adjust to this volume with little problem due to the slightness of the tension used. Take Day 4 off.


Day 5- Your goal for today is to stretch your penis for 2 hours and 20 minutes in 4 sessions of 35 minutes each.
Spend some extra time after your last session of the day in an extra long hot wrap/soak. Take Days 6 and 7 off.


Week 2


Day 1- Your goal for today is to stretch your penis for 3 hours and 20 minutes in 4 sessions of 50 minutes each.


Day 2- Your goal for today is to stretch your penis for 4 hours in 4 sessions of 1 hour each. By this time, you'll start to feel as if you can wear your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] all day. Resist the temptation and stick to the routine as outlined. Take Day 3 off.


Day 4- Your goal for today is to stretch your penis for 4 hours and 30 minutes in 3 sessions of 1 hour and 30 minutes each. As you can see, you're starting to string together your sessions to eventually get to 1 long session.


Day 5- Your goal for today is to stretch your penis for 5 hours and 15 minutes in 3 sessions of 1 hour and 45 minutes. Take Days 6 and 7 off.


Week 3


Day 1- Your goal for today is to stretch your penis for 6 hours in 3 sessions of 2 hours each.


Day 2- Your goal for today is to stretch your penis for 7 hours in 3 sessions of 2 hours and 20 minutes each.


Day 3- Your goal for today is to stretch your penis for 8 hours in 3 sessions of 2 hours and 40 minutes each.


Day 4- Things are changing a bit today. Your goal for today is to stretch your penis for 9 hours in 2 sessions of 4 hours each, and 1 session of an hour.


Day 5- Your goal for today is to stretch your penis for 10 hours in 2 sessions of 4 hours each, and 1 session of 2 hours.


Week 4


Day 1- Your goal for today is to stretch your penis for 11 hours in 2 sessions of 5 hours each, and 1 session of an hour.


Day 2- Your goal for today is to stretch your penis for 12 hours in 2 sessions of 5 hours each, and 1 session of an hour. Congratulations! You have reached your total hourly goal of 12 hours!


Day 3- Your goal for today is to stretch your penis for 12 hours in 2 sessions of 6 hours each.


Day 4- Your goal for today is to stretch your penis for 12 hours in 1 7 hour and 30 minute session, and 1 session of 4 hours and 30 minutes.


Day 5- Your goal for today is to stretch your penis for 12 hours in 1 9 hour session, and 1 3 hour session.


Day 6- Your goal for today is to stretch for one 12 hour session without anything more than a few short breaks.


At this point, you should be ready for the advanced [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] routines.


Advanced


Each week should have you stretching for a total of 72 hours- 12 hours a day with a day off.




Week 5- Your tension settings should be set at 600 grams of pressure.




Week 6- Your tension settings should be set at 900 grams of pressure.




Week 7- Your tension settings should be set at 1200 grams of pressure.




Week 8- Your tension settings should be set at 1500 grams of pressure.




After you've reached this level, you can start adding intensity techniques to your routine.


One technique would be to slowly raise and lower your penis while it's in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] towards the end of your stretching session. Start with 50 reps, and try to work up to 500.


Another technique to try is moving the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] in different directions (slowly, of course). You can try side to side, up and down, circular motions, or a variety of all these. The key is to try and stretch your penis and ligaments beyond the level that you're accustomed to. That's what causes growth.


Yet another intensity technique is to add an extra half-rod above your current length and try holding this stretched position with the help of your hand. Don't squeeze too hard or you'll cause bruising.

My source for this routine was BigAl
 
Wow....You would’ve had every piece of equipment for the money that you spent. I’m so sorry didn’t see the special. As far as installments are concerned I’ll run that by lightning I think I’ve already asked him before and he said it couldn’t be done but no harm in asking again
Sadly I bought the lengthmaster silistretcher and mosred before the bundle came out haha . Wish I had waited, but I wouldn't have these gains!
 
giphy.gif


"Where does he get those wonderful toys?"

?
 
Keep helping out, keep making great posts, keep the motivation up and contribute as much as possible and you could win all of this plus $1000 at the end of the competition. You just need to get involved.

Thank you brother, but let's give the prizes to those who are truly in need. Those that are too shy, and also in need of funds and hardware to MOTIVATE them.
 
  • Like
Reactions: DLD
Who has made gains using the Silistretcher?

I got my Silistretcher in March 2019.

In the last 3 months I have made 3/8 inch gain in length using both manuals and Silistretcher for healing.
I am concentrating on length first.

You can see my routine and tweaks based on feedback from DLD and other brothers by searching “come on gains”.

Just wanted to see what kind of results everyone is getting from Silistretcher.

Have you noticed any...
stamina changes?
length growth?
girth growth?
glans growth?
veins showing more?
etc?
 
It is only been out for about six months and many have reported gains. As time goes forth it’s becoming the most preferred ADS on the market. The versatility, the quality, effectiveness and the bulletproof lifetime warranty it is a no brainer!
 
I really like the way the piston on the Silistretcher2 is hollow in the middle.
It allows the existing contoured Silipad to go further in when pressed in the middle of the Silipad and contours to the tip of the glans so that the tip of the glans sits better and helps prevent fluid build up.

The new Silipad2 should be great as well and I will see if it eliminates the Silicap once it arrives.
 
I really like the way the piston on the Silistretcher2 is hollow in the middle.
It allows the existing contoured Silipad to go further in when pressed in the middle of the Silipad and contours to the tip of the glans so that the tip of the glans sits better and helps prevent fluid build up.

The new Silipad2 should be great as well and I will see if it eliminates the Silicap once it arrives.

So glad you are were happy! Keep us updated as you learn more At least know what’s good. Giving us a review of pros and cons is always a great idea that way we can think about these things in future projects.
 
Ok so here is a list of pros and cons for Silistretcher.
Tell me what you think or if you agree.

Pros

-Overall comfortable to wear

-Easily concealed with loose clothing

-Lifetime warranty

-Great customer service

-comfortable healing device

-good variations of sleeves

-upgraded as improvements are made such as stronger Silicup

-faster growth when used with SRT method

-easy to put on with some practice

-Can use as ADS, healing post workout device, or weight hanger

-Cheaper than competitors

-Versatility

-Options for growth
(I’d like to see a 1.75 Silistretcher cup sometime in the future, I currently use 1.5 and at some point will need a larger Silicup and going from 1.5 to 1.75 might be better than 2 inch.


Cons

-Siliscap slips sometimes and causes fluid build up
(pinhole on Silicap may fix issue, also roll on to glans instead of stretching over)

-Belt can cause slight pinch where glans and shaft meet
(Use Silistrap in up position instead)

-Velcro from belt causes discomfort and scratchy feeling on waist
(I don’t have a solution I’ve used for this, what was suggested to use was something to wrap around Velcro or cut pieces from the belt that are irritating from Velcro but I think a more comfortable belt can be made or use Silistrap)

-Silisleeves can get pinholes and loose suction when too much suction applied
(Use less suction, use longer sleeve, use double sleeve, use duro sleeve or combination of the above)

-Should not sleep with Silistretcher on
(This is dangerous no matter what device you are using, play it safe be awake)
 
Last edited:
Definitely roll silicap on.

Also the remedy for velcro would be to have it end further from the side edges so the user wouldn't have to be perfect in the placement. Easy fix for me is to find some soft cloth, cut thin strip and attach along border of velcro.
 
IF going to be your first device do the research.
Fort is about 400 dollars
But, the PROS and Con. is you test it.

Current I bought:
Bathmate
Quick extender pro
2X Air pumps.
MOS Pump.

If not comfortable then, that's your final decision.
everyone body is difference and tolerance levels are to!
That’s great that you were able to buy other devices like Bathmate, MOS pump and quick extender pro.
I was considering the quick extender pro when I saw the Silistretcher come out.
That’s the double noose extender right.

How has the quick extender been for you in wearing comfort?

Are you able to clock an hour straight with no issues?

I hope you are having success with the quick extender pro.

For me the Silistretcher has been a big difference I had a single noose type extender before and had issues keeping it on for more than 20 to 30 minutes before having to take it off because of circulation or cold glans.
The Silistretcher is a world of difference.
It is worth the price if you are considering it, you will be happy with it.
Very big difference for me in comfort compared to noose extender.
You can see my pros and cons.

If you search “come on gains” you can see my current routine for length using manual stretches and Silistretcher.

Happy gains!
 
Last edited:
Keep up the good reviews my brothers we take everything into consideration so don’t be scared to suggest something.
 
Think about getting a pressure gauge built into, onto the SS so the user knows exactly the amount of pressure during a session.

This will count for more when using higher weight, as that will create increased pressure in itself.

I know, and understand that such an introduction brings with it the potential for a weakness, but as the competition seem to also want to go that direction, it makes sense to at least entertaining the possibility of such a modification.
 
Think about getting a pressure gauge built into, onto the SS so the user knows exactly the amount of pressure during a session.

This will count for more when using higher weight, as that will create increased pressure in itself.

I know, and understand that such an introduction brings with it the potential for a weakness, but as the competition seem to also want to go that direction, it makes sense to at least entertaining the possibility of such a modification.

Thing that is great about the brotherhood in our equipment is the fact that we created here and when we modify it it doesn’t take a whole year to make that happen, in most cases improvements can be made rather quickly. But I can tell you this much, our product line will be the best ever upon perfecting it.
 
As far as quick extender pro is for comfort, I found that I could wear it for more than several hours!
But, choose to wear it for 30 mins on and take off for a pee break. I do this for 2hrs and 30 mins. sometime more cause I forget its on me. until I, go to the bathroom! very comfortable to wear.

Lifetime warranty
good service
great price
Get the deluxe model for 179.99 then, buy more better pump later.
I purchased extra tension springs and and tension rods.
Since, really like the device. I am invested with this device for the long term.
 
View attachment 1820388



With over 15 years of research and development, MOS is proud to bring you our exclusive stealth silistretcher for all day penis stretching and weight hanging.


The silistretcher is a simple yet effective fool-proof vacuum piston ASD/Hanger system that is self contained and requires no external pumps or attachments. No fancy bells and whistles, no fancy packaging, just a hard-core system that works.

The silistetcher can be worn as an all day stretcher in stealth mode under your clothes while you are at work or out running around. When you are at home, you can use the silistrecther for your weight hanging sessions.

The vacuum and silisleev combination provides the ultimate in comfort with no blistering or fatigue as in standard vacuum hangers and ADS systems. The silistretcher and silisleevs come with a lifetime warranty from MOS even if you break them (which is nearly impossible).



View attachment 1821565
View attachment 1821564View attachment 1821562View attachment 1821561View attachment 1821560View attachment 1821563View attachment 1821559View attachment 1821558View attachment 1821557View attachment 1821556View attachment 1821192View attachment 1821190View attachment 1821191

INCLUDES
ADS belt for strapping to waist or leg
2.5lb starter weight set and arbor
Four SiliSleeves (two long and two regular) and one silicap
Discrete carrying bag
Lifetime warranty (even if you break it!)

Optional inline SiliScale to monitor constant tension up to 55lbs/25Kgs

How to size your SIliStretcher


Troubleshooting the SiliStretcher


Maximizing Vacuum on the Silistretcher


How to use
  1. Apply a siliscap to the head of your penis to prevent fluid retention and reduce sensitivity.
  2. Put the head of your penis into the silistretcher,
  3. Unroll the silisleeve over your shaft
  4. Give the silistretcher vacuum knob a couple of twists (clockwise).
  5. Your penis will be safely and securely pulled into the silistretcher.
  6. Begin your session
To release vacuum, give the SiliStretcher vacuum knob a couple twists (counter clockwise).

When you receive your SiliStretcher, you may notice a small amount of translucent lube inside the SiliStretcher vacuum bulb behind the piston. This is a food grade lube that provides years of use and ease of piston motion.

The piston valve is designed to come out for maintenance. If you over extract the piston valve, push it back in with your finger and twist the vacuum knob to re-engage it.

For the most effective vacuum sessions with the SiliStretchers and SiliSleevs, follow this guide below.

Make sure your entire penis is shaved clean of hairs

Hairs will create loss of suction with SiliSleevs and the SiliStretcher .

Make sure your penis is clean, dry and free of oil
If you put lotion on your skin, this will cause loss of grip . Your skin also has a natural oil that can cause loss of grip. Sweat causes loss of grip. We strongly recommend cleaning and drying your penis then using MOSGrip to remove all the natural oils of your skin and create a tack for maximum grip. MOSGrip also helps eliminate sweat under the SIliSleev .

Make sure your SiliSleevs are clean, dried and powdered with MOSGrip
Dirty oily SiliSleevs with pubic hairs in them will cause loss of suction/vacuum /grip . You want to clean your SiliSleevs before each use

Make sure you do not have a pin hole in your SiliSleev from excessive use
Pinholes are easiest to find if you blow up the SiliSleev with a little air from your mouth. Don't blow them up In a big balloon. Pin holes are like a slow leak in a tire.





AVAILABLE @
View attachment 1820404

Back on topic ?
 
I received my new Silipad2 today.
Wore it with Silistretcher2 for about an hour
It works well no fluid build up on the tip of the glans.
I did have some fluid that built up around the halfway mark on the glans.
It was right where the Silipad2 ended.
I think it happened because there is a small space left between the glans and the Silistretcher cup where the Silipad2 ends and it left a small ring of fluid around the upper glans.

It still felt comfortable and I do like it.
Especially because there was no fluid build up on the tip of the glans.

I think it would be good if the Silipad2 was longer.
It covers about 1/2 of my glans.

I did not have the Silicap on, but I will keep trying and report back.
 
Thanks for the feedback! It's possible we can make a deeper SiliPad in the near future. Let's hear more user feedback as they are just starting to arrive to everyone. You can also try micro porous tape to wrap the glans to help reduce fluid build up around the bottom of the glans in the meantime.

Keep in mind, there will naturally be some expansion in the glans due to vacuum.

We are currently experimenting with gel pads that form around the penis and then insert into the SiliStretcher2. This would be a one size fits all solution but it is still in the development process.
 
For the advanced users, we have a new hard ADS attachment for the waist, foot, ankle and calf coming very soon.

This will be many levels above the adjustble velcro belt and be able to increase higher tension for those who want insane ADS tension above what they are getting now.

Keep in mind, you want a constant moderate tension for long periods to achieve maximum growth and the current set up is excellent at achieving this.
 
With this type of attachment, will it be more like traction stretching with a rod assembly, rather than a passive healer?

How much will it cost? I would hold off on ordering my next purchase until it’s ready.
 
For the advanced users, we have a new hard ADS attachment for the waist, foot, ankle and calf coming very soon.

This will be many levels above the adjustble velcro belt and be able to increase higher tension for those who want insane ADS tension above what they are getting now.

Keep in mind, you want a constant moderate tension for long periods to achieve maximum growth and the current set up is excellent at achieving this.
@Lightning @DLD @huge-girth @arkailija @REDZULU2003 @Threak-X . I was just wondering if anyone could help me with my new Lengthmaster. I'm finding it hard to hang with Lengthmaster but I could stretch for awesome 35 minutes without any pain but as soon as I attach weights it hurts me like hell. I could use my cheap vacuum hanger for 2hours (30mins) each sets but I couldn't do a single sets with Lengthmaster even after wrapping with double silisleeves and ace. Please your advice would be appreciated.
 
@Lightning @DLD @huge-girth @arkailija @REDZULU2003 @Threak-X . I was just wondering if anyone could help me with my new Lengthmaster. I'm finding it hard to hang with Lengthmaster but I could stretch for awesome 35 minutes without any pain but as soon as I attach weights it hurts me like hell. I could use my cheap vacuum hanger for 2hours (30mins) each sets but I couldn't do a single sets with Lengthmaster even after wrapping with double silisleeves and ace. Please your advice would be appreciated.

That substitution would work but I would rather see you and hang with the LM in a comfortable state. Usually when there’s pain or pinching it’s because the wrap is uneven or has wrinkles and causes the skin pain and pinching. The best way to to deal with this would be making sure that your wrap is completely smooth and without wrinkles. I had the same issue and once I figured out wrapping I was able to hang up to 70 pounds.
 
Thanks for the feedback! It's possible we can make a deeper SiliPad in the near future. Let's hear more user feedback as they are just starting to arrive to everyone. You can also try micro porous tape to wrap the glans to help reduce fluid build up around the bottom of the glans in the meantime.

Keep in mind, there will naturally be some expansion in the glans due to vacuum.

We are currently experimenting with gel pads that form around the penis and then insert into the SiliStretcher2. This would be a one size fits all solution but it is still in the development process.
I would still like to see the original Silipads and Silipad2 continue to be sold.

I think they have various uses and maybe could be available in packages like all Silipads for a certain price or any two you select for a certain price.

Although I think most would benefit from buying a package with various and trying what is best for them.
 
Thanks for the feedback! It's possible we can make a deeper SiliPad in the near future. Let's hear more user feedback as they are just starting to arrive to everyone. You can also try micro porous tape to wrap the glans to help reduce fluid build up around the bottom of the glans in the meantime.

Keep in mind, there will naturally be some expansion in the glans due to vacuum.

We are currently experimenting with gel pads that form around the penis and then insert into the SiliStretcher2. This would be a one size fits all solution but it is still in the development process.
I would still like to see the original Silipads and Silipad2 continue to be sold.

I think they have various uses and maybe could be available in packages like all Silipads for a certain price or any two you select for a certain price.

Although I think most would benefit from buying a package with various and trying what is best for them.
 
I’m really liking the new silipad. I think it’s a substantial improvement because it snugly conforms to and holds my glans in place. If I’m using it as an ADS, I don’t even need to wear a silicap. When using it to stretch and hang, I use a cap.
 
That substitution would work but I would rather see you and hang with the LM in a comfortable state. Usually when there’s pain or pinching it’s because the wrap is uneven or has wrinkles and causes the skin pain and pinching. The best way to to deal with this would be making sure that your wrap is completely smooth and without wrinkles. I had the same issue and once I figured out wrapping I was able to hang up to 70 pounds.

Thank you @DLD I will keep trying to get the best comfort with LM
 
Well I got the new SS 2.0.

It is absolutely amazing.

More compact, smaller footprint, stronger material, 2x more vacuum with 1/2 the space needed as the original.

This redesign is simply groundbreaking on already groundbreaking territory.

I’m able to hang 10-15lbs even without the grip powder. I’m not even sensing any movement and I feel no fluid retention because of the new SiliPad.

I’m using a short 4” DuroSleev as well and can easily hang 15lbs.

I’m not comfortable hanging that much at the moment since I’m just getting back into it. 7-10lbs is more than enough but the way it holds I don’t see why you could not do 20-30lbs if you wanted to.

I don’t recommend that though, as it’s not needed to get results!

I’m have two SS 2.0, the smaller and the regular size and I can see a use for both.

The regular size can be used for heavy hanging and hanging in privacy. The smaller more compact can be used to ADS since its small footprint.

You would not even see this under your clothes.

Here is a video hanging/swinging 10lbs and a couple shots with 10lbs casually hanging in my room.

View attachment 1822545
View attachment 1822543View attachment 1822544
 
Last edited by a moderator:
I just read your review in the other, so happy that you’re so pleased with the I just read your review, so happy that you’re so pleased with your SiliStretcher!
 
Back
Top