I remember you mentioning since almost everyone was doing this anyway, you all decided to put the hole there.
NEW - SiliStretcher All Day Stealth Penis Vacuum Stretcher and Hanger
@Lightning the belt looks good, however it doesn’t fit.
I wear size 36 pants, but even with the adjustment the belt doesn’t fit.
The tension strings are good, but the string kept loosing the tension.
The plastic piece where it grabs the string for tension keeps falling off.
When you pull the strings for more tension you are left with slack that kind of just flops around, so maybe it should have should have a Velcro piece or some way to keep.
The amount of tension that I feel on the pull is insane though. I think you can forgo some weight for the ankle strap instead.
For ultimate comfort I think extra cushion would be nice.
I will keep looking at the different configurations and try them with leg and ankle straps and see how it goes.
The configuration seems pretty simple you just have to try them out.
I’ll report back again after I keep wearing.
@Lightning the string inserts in the tension channel and then you pull and the wheel catches it, but on mine it popped off a few times. I put it back on and it seemed to hold. I will let you know.
Great, so there is another belt size, ok good to know.
The tension in the pointing down position with ankle strap was really good.
Only thing is the strap that goes underneath the foot I think needs to be moved forward a bit or would be nice if it was adjustable.
The bottom strap kept going past my heel.
I also tried the ankle strap in opposite direction, but same thing the bottoms strap would go past my heel.
I think that the downward position is really going to bring some growth though once I keep at it.
Last edited:
Are you wearing it over socks?
Also, if you are flat foot, it may eventually slip. As an alternative, try the padded knee strap around the ankle. The knee strap is two pieces but you only need one for the ankle.
The tension cords are cut to size. We supply the thick one at 3 feet and the thinner ones at 6 feet so you can double up or cut to size.
Each user has their own needs.
Also, if you are flat foot, it may eventually slip. As an alternative, try the padded knee strap around the ankle. The knee strap is two pieces but you only need one for the ankle.
The tension cords are cut to size. We supply the thick one at 3 feet and the thinner ones at 6 feet so you can double up or cut to size.
Each user has their own needs.
I tried ankle strap without socks.
I tried the knee attachment at the ankle, but with the pull it kept riding up towards the calf and it felt like it was cutting circulation on my foot which is why I liked the ankle strap with the other strap that goes under foot better.
I will keep trying and provide feedback.
Take your time and be patient and gentle with yourself as there is a learning curve to all tools. Keep updating us and asking for help as needed.
You can fold the unused length at the bases to save for growth. The folded double layers also add restriction at the base.
Unfortunately getting a silicap2 on my flaccid penis is quite the challenge. Ugh.
Put it on when your erect.
At this point I would say no as we have a lot of things cooking right now. But sometime in the future we will be releasing other sizes. You can try to pre-stretch yours as this may work.
I have had the same problems as just grow has. The belt is too short and I have a problem with wheel coming off the bungee cord locking part. In reality only one end needs to be adjustable so i wrapped a rubber band around the end that keeps coming off and use the other end for adjusting tension. I do like the ankle/leg straps and other then the wheel off the bungee, I do like the fact it is adjustable. Are you sending the larger belt to people who already bought one?
REDZULU2003
Well-known member
Yes, we have longer belts in stock. Just PM me your order number and we will get one out to you. For the wheel that is popping off, if it's the larger hook you are having issues with, we have a mod for it.
View attachment 1824213View attachment 1824214
Free SiliPad3
Attention SiliStretcher2 users, we have a new deeper SiliPad3. It basically acts as a SiliCap and a SiliPad combined and is available for both the 1.25" and 1.5" SiliStretcher2. It is the same depth of the SiliStretcher2 when fully retracted so there is no void inside the SiliStretcher2 bell to aid in reducing fluid retention.
For the SiliStretcher2 users that are active in this thread and are willing to post feedback, reply to this post and also PM me your email address if you would like to receive a complimentary SiliPad3 (shipping charges apply), .
Attention SiliStretcher2 users, we have a new deeper SiliPad3. It basically acts as a SiliCap and a SiliPad combined and is available for both the 1.25" and 1.5" SiliStretcher2. It is the same depth of the SiliStretcher2 when fully retracted so there is no void inside the SiliStretcher2 bell to aid in reducing fluid retention.
For the SiliStretcher2 users that are active in this thread and are willing to post feedback, reply to this post and also PM me your email address if you would like to receive a complimentary SiliPad3 (shipping charges apply), .
So are you saying to put a screw into the wheel?
We drill a hole through it and use a sex screw (rivet)
View attachment 1824216View attachment 1824217
Excellent! Got it
Nice I knew you guys would come up with something quick!
Thank you.
@Lightning this sounds very promising to continue to minimize fluid retention as much as possible.
I would like to try this new Silipad/cap.
I truly hope the brotherhood takes advantage of these offers that you’re constantly making.
SP3- No More SCAPS !!
in for this
@Lightning, can’t wait to try the new Silipad3 version. I think one of the reasons for fluid buildup is just as you describe lighting, it is the void. I was also thinking about putting some memory foam in between the Silipad and the Silistretcher cup, so that if there is any void the Silipad will be pushed with the memory foam to meet the glans again.
@Lightning I'd be happy to try one of the sp3's out ?
@Lightning can you post a picture?
I just wanted to comment on all the great things and improvements to the Silistretcher.
-all kinds of sleeves
-new Silicap
-Silistrap
-Silistretcher harder silicup/ bell
-weights
-new hard core belt
As I was putting on my Silistretcher this evening I was just thinking how much easier it is to put it on now than when I first got it.
There is a small learning curve so be patient when trying out new things.
This is the best stretcher out there in my opinion.
Is there still thoughts on adding something to the Silistretcher to keep you in a bundle type stretch?
I think if there was a way to hold the ring from spinning then one could twist after putting on the Silistretcher, but the rings spins right away taking away the twist.
-all kinds of sleeves
-new Silicap
-Silistrap
-Silistretcher harder silicup/ bell
-weights
-new hard core belt
As I was putting on my Silistretcher this evening I was just thinking how much easier it is to put it on now than when I first got it.
There is a small learning curve so be patient when trying out new things.
This is the best stretcher out there in my opinion.
Is there still thoughts on adding something to the Silistretcher to keep you in a bundle type stretch?
I think if there was a way to hold the ring from spinning then one could twist after putting on the Silistretcher, but the rings spins right away taking away the twist.
This silistretcher is ridiculous!
So I'm sure u all know by now that I'm a over thinker and like to do things exact by all the questions I ask. I thought the silistretcher would have gave me problems like the mityvac did when I first attempted to use it, but not at all.... I got it on the first try, no slippage no nothing.
The comfort is amazing, I know I have it on but it's not bothering me to the point that I'm thinking about it constantly.
The velcro scraps was one of my concerns because I thought they would be sliding after being put under the pulling force of the extender, but no, they are strong as hell and stay in place firmly.
I'm amazed at how discrete this thing is too, in the picture u see me wearing a "SKINNY" fit jogger and it's barely showing.
This is some game changing shit right here @Lightning
So I'm sure u all know by now that I'm a over thinker and like to do things exact by all the questions I ask. I thought the silistretcher would have gave me problems like the mityvac did when I first attempted to use it, but not at all.... I got it on the first try, no slippage no nothing.
The comfort is amazing, I know I have it on but it's not bothering me to the point that I'm thinking about it constantly.
The velcro scraps was one of my concerns because I thought they would be sliding after being put under the pulling force of the extender, but no, they are strong as hell and stay in place firmly.
I'm amazed at how discrete this thing is too, in the picture u see me wearing a "SKINNY" fit jogger and it's barely showing.
This is some game changing shit right here @Lightning
Great to hear you are enjoying the SiliStretcher2, thanks for the pictures, we love pictures!!
Are you using the DuroSleev or the SiliSleev2 with it? I see you have a long SiliCap2 on.
Thanks lightning ??
@Lightning what is that small sleeve that @SageL has on over the Silistretcher bell.
Is this something used to prevent slipping or extra protection?
How do I get one?
Looking huge my man! Thanks for putting pictures up.
Just got back. will be happy to give feedback and love to try the new silipad
Go to the store and give the feedback and send a message to lightning and you will get your free SiliPad.
I’ve been trying something new to combat fluid retention on the tip of the glans while wearing Silistretcher.
Tape and a sponge.
Let me know what you think.
Click on the link and scroll up or down until you see pictures.
Tape and a sponge.
Let me know what you think.
Click on the link and scroll up or down until you see pictures.
Just wondering does anyone use a heating pad or rice sock prior to hanging.I know its a good thing to use heat with the mityvac prior and during a pumping session.Curious as to what my hanging buddies do here though.Do you go in the SS prior to the hang all warmed up or straight in with no warm up.I think I asked this question a long while back when I bought a Malehanger and stillwantmore mentioned he hangs with no warm up if I remember right..Any thoughts!
wow, this is radically cool and insanely badass, I am going to SiliStretch like a mad man and see how far I can go maximum intensity without issue.
@NIK1 I don’t hang with weight but I use the silistrap and knee/ ankle attachments for stretchwith my Silistretcher.
I have done both going in warmed up and without warm up.
There are two methods I use.
I usually perform manual stretches and then use MOSRed to speed up healing and warm down and then I will enter the Silistretcher. With this method I can use higher tension immediately and notice the stretch quickly.
The second method I have been using is what DLD put out using reverse pyramid method.
I go in immediately and use low tension increasing to medium and then higher tension every 20 minutes or so and then come back down to medium and then low every 20 minutes.
