NEW - SiliStretcher All Day Stealth Penis Vacuum Stretcher and Hanger

hey @JustGrow thx for the reply.

i've tried with both the long sleeve and short sleeve.
i always wear the silicap .

i wear the silistrap attatched to right below my knee, (i usewhen im sitting down in front of computer)

the silistretcher is usually retracted all the way to the top when i use it, and then just give it 1 twist.
but i tried something new today where i did 3 turns beforehand , and then after inserting i did half a turn. (as suggested by another user)

View attachment 1822014

so my routine is this.
1. retract piston all the way to the top (picture 1)
2.attach sleeve to bell and fold sleeve over itself so that i can insert easier (picture 2)
3.insert until i touch the comfort pad and this creates and airtight seal.
4. turn/twist 1 time
5. roll remainder of sleeve over penis.

ive had 2 rare ocasions where everything went fine, but not sure what i did.
i have also noticed that silicap never conforms to my gland all the way, there is always a bit of space between the tip of my head and the silicap.
 
JustGrow said:
Is anyone just trying the Silistretcher by itself without any other methods and see if they get growth?

I was just wondering.

I’m not willing to try right now as currently my routine consists of manual work then the Silistretcher for healing.
Click to expand...

Sounds like you may be using it wrong. @JustGrow asked the right questions. You only need a half turn to secure your penis and make sure you are using a silicap or micropore tape on your glans. Also the SiliPads help with this.

Try using a needle to make a pin hole in the silicap to help it release air and conform to the glans.
 
Lightning said:
Sounds like you may be using it wrong. @JustGrow asked the right questions. You only need a half turn to secure your penis and make sure you are using a silicap or micropore tape on your glans. Also the SiliPads help with this.

Try using a needle to make a pin hole in the silicap to help it release air and conform to the glans.
Click to expand...
The hole in the Silicap really helps.
I did the same thing except I took a knife and push through for a very very small slit in the Silicap tip. This is at your own risk don’t think that’s covered.

I think what happens sometimes is that the Silicap slides forward and adds extra vacuum to the tip and that is what creates the fluid build up.

Also try a quarter turn instead of a 1/2 turn.

For me the Silistrap helps when I am pointed straight up.

I have not tried the grip powder, but I think a few members have and it’s worked for them.

Also try rolling the Silicap like a condom and rolling it on the glans. This will help so that not that much of a bubble is created.

Hope this helps.
 
No problem my brother that’s what we’re here to do is to help you. Please be patient with yourself and gentle and give it another go, I promise you that you will master this. So take your time and please use us to help you in anyway.
 
z1chsr said:
hey guys wondering if someone can help me, i cant seem to use this longer than 1 hour otherwise my head gets deformed at the tip. there is also discoloration and feels a bit cold. (no pain though)View attachment 1822011
Click to expand...
How far are you going into the silsistretcher? Looks like u need to go further in I turn mine about how way up the silsistretcher or more then enter it so all/most of my gland/ head is in it
JustGrow said:
Is anyone just trying the Silistretcher by itself without any other methods and see if they get growth?

I was just wondering.

I’m not willing to try right now as currently my routine consists of manual work then the Silistretcher for healing.
Click to expand...
I gained 1/8 of an inch in about a month & 1wk with 513 hrs use but had issue w silistretcher n got a new one sent out put haven't used it yet some life stuff came up. Gonna try n get back on pe wagon tonight
 
85ray said:
How far are you going into the silsistretcher? Looks like u need to go further in I turn mine about how way up the silsistretcher or more then enter it so all/most of my gland/ head is in it

I gained 1/8 of an inch in about a month & 1wk with 513 hrs use but had issue w silistretcher n got a new one sent out put haven't used it yet some life stuff came up. Gonna try n get back on pe wagon tonight
Click to expand...

The silistretcher will surely bring quick gains. In the new 2 years, we will have numerous members with extremely long penis all over the forum. All thanks to the silistretcher.
 
SiliStretcher2 starts shipping today! We have 1.25" and 1.5" diameters available now.

View attachment 1822044

Introducing the new SiliStretcher2

We have performed some major upgrades to the original SiliStretcher based on feedback by all the current users making the best ADS /Hanger combo even better!

New features
  • Reduction to the overall length for stealth and strength
  • A new thicker acrylic formula for strength
  • New long lasting SiliSleev Duros to intensify your stretches
  • Improved vacuum piston system for grip
  • New deeper SiliPads to control fluid retention
  • DuroBand to add a layer of protection around the SiliStretcher rim
  • New 1.25" (3.2mm) diameter available
The new vacuum piston knob is half the size of the original coming in at 1" (25mm) long. This cuts down the overall length of the SiliStretcher to make it even more stealth and reduce friction on the handle and acrylic bell when hanging heavy weight and intense stretching . This also helps eliminate kinking when side stretching .

Our new thicker acrylic formula system improves overall strength to the acrylic vacuum bell to eliminate hairline cracks that occasionally happened with the original SiliStretcher .

Our new semi transparent SiliSleev Duros (DuroSleevs ) will not only last much longer than the original SiliSleevs but intensify your stretching and hanging sessions while allowing you to monitor your penis. Users are effectively hanging up to 30lbs with the SiliStretcher2 and DuroSleevs.

The new piston system is now set to where the piston travels half the vacuum bell to allow you to insert your penis into the bell, then apply vacuum for more security and control.

We've added a DuroBand to provide an extra layer of protection around the SiliStretcher rim where the SiliSleevDuro attaches. You simply slide the DuroBand over the SiliSleev at the base of the SIliStretcher . This great addition eliminates wear to the SiliSleev when wearing under jeans and rubbing against the SiliSleev increasing the life of your SiliSleevs & DuroSleevs.

We've added a new 1.25" diameter SiliStretcher which is the sweet spot for men that don't fully fit in the 1.5" version or find the 1.1" too small. This new 1.25" version will be the perfect fit for most men.

Best of all, if you are a Current SIliStretcher owner and are currently posting updates in this thread, you are eligible for a complimentary 2.0 version (shipping rates apply). Email [email protected] with your name and email that you used on your original order.
 
Lightning said:
SiliStretcher2 starts shipping today! We have 1.25" and 1.5" diameters available now.

View attachment 1822044

Introducing the new SiliStretcher2

We have performed some major upgrades to the original SiliStretcher based on feedback by all the current users making the best ADS /Hanger combo even better!

New features
  • Reduction to the overall length for stealth and strength
  • A new thicker acrylic formula for strength
  • New long lasting SiliSleev Duros to intensify your stretches
  • Improved vacuum piston system for grip
  • New deeper SiliPads to control fluid retention
  • DuroBand to add a layer of protection around the SiliStretcher rim
  • New 1.25" (3.2mm) diameter available
The new vacuum piston knob is half the size of the original coming in at 1" (25mm) long. This cuts down the overall length of the SiliStretcher to make it even more stealth and reduce friction on the handle and acrylic bell when hanging heavy weight and intense stretching . This also helps eliminate kinking when side stretching .

Our new thicker acrylic formula system improves overall strength to the acrylic vacuum bell to eliminate hairline cracks that occasionally happened with the original SiliStretcher .

Our new semi transparent SiliSleev Duros (DuroSleevs ) will not only last much longer than the original SiliSleevs but intensify your stretching and hanging sessions while allowing you to monitor your penis. Users are effectively hanging up to 30lbs with the SiliStretcher2 and DuroSleevs.

The new piston system is now set to where the piston travels half the vacuum bell to allow you to insert your penis into the bell, then apply vacuum for more security and control.

We've added a DuroBand to provide an extra layer of protection around the SiliStretcher rim where the SiliSleevDuro attaches. You simply slide the DuroBand over the SiliSleev at the base of the SIliStretcher . This great addition eliminates wear to the SiliSleev when wearing under jeans and rubbing against the SiliSleev increasing the life of your SiliSleevs & DuroSleevs.

We've added a new 1.25" diameter SiliStretcher which is the sweet spot for men that don't fully fit in the 1.5" version or find the 1.1" too small. This new 1.25" version will be the perfect fit for most men.

Best of all, if you are a Current SIliStretcher owner and are currently posting updates in this thread, you are eligible for a complimentary 2.0 version (shipping rates apply). Email [email protected] with your name and email that you used on your original order.
Click to expand...


I just sent you an email and a pm
 
85ray said:
How far are you going into the silsistretcher? Looks like u need to go further in I turn mine about how way up the silsistretcher or more then enter it so all/most of my gland/ head is in it

I gained 1/8 of an inch in about a month & 1wk with 513 hrs use but had issue w silistretcher n got a new one sent out put haven't used it yet some life stuff came up. Gonna try n get back on pe wagon tonight
Click to expand...
@85ray Great job on the growth! (clap)

How do you wear the Silistretcher for tension; on the knee, around the waist, or Silistrap pointed up?
 
Lightning said:
SiliStretcher2 starts shipping today! We have 1.25" and 1.5" diameters available now.

View attachment 1822044

Introducing the new SiliStretcher2

We have performed some major upgrades to the original SiliStretcher based on feedback by all the current users making the best ADS /Hanger combo even better!

New features
  • Reduction to the overall length for stealth and strength
  • A new thicker acrylic formula for strength
  • New long lasting SiliSleev Duros to intensify your stretches
  • Improved vacuum piston system for grip
  • New deeper SiliPads to control fluid retention
  • DuroBand to add a layer of protection around the SiliStretcher rim
  • New 1.25" (3.2mm) diameter available
The new vacuum piston knob is half the size of the original coming in at 1" (25mm) long. This cuts down the overall length of the SiliStretcher to make it even more stealth and reduce friction on the handle and acrylic bell when hanging heavy weight and intense stretching . This also helps eliminate kinking when side stretching .

Our new thicker acrylic formula system improves overall strength to the acrylic vacuum bell to eliminate hairline cracks that occasionally happened with the original SiliStretcher .

Our new semi transparent SiliSleev Duros (DuroSleevs ) will not only last much longer than the original SiliSleevs but intensify your stretching and hanging sessions while allowing you to monitor your penis. Users are effectively hanging up to 30lbs with the SiliStretcher2 and DuroSleevs.

The new piston system is now set to where the piston travels half the vacuum bell to allow you to insert your penis into the bell, then apply vacuum for more security and control.

We've added a DuroBand to provide an extra layer of protection around the SiliStretcher rim where the SiliSleevDuro attaches. You simply slide the DuroBand over the SiliSleev at the base of the SIliStretcher . This great addition eliminates wear to the SiliSleev when wearing under jeans and rubbing against the SiliSleev increasing the life of your SiliSleevs & DuroSleevs.

We've added a new 1.25" diameter SiliStretcher which is the sweet spot for men that don't fully fit in the 1.5" version or find the 1.1" too small. This new 1.25" version will be the perfect fit for most men.

Best of all, if you are a Current SIliStretcher owner and are currently posting updates in this thread, you are eligible for a complimentary 2.0 version (shipping rates apply). Email [email protected] with your name and email that you used on your original order.
Click to expand...
This is awesome!
 
I just saw the 2.0 is out I'm very excited as I was getting a lot of pinching w the original which wouldn't even be that bad if I could take it off right away but I'd usually be at work or something and not be able to get away and just have to suck it up for a while
So I can't wait to try it out n see how it works bc I am pretty much across the waist wearer
 
85ray said:
I just saw the 2.0 is out I'm very excited as I was getting a lot of pinching w the original which wouldn't even be that bad if I could take it off right away but I'd usually be at work or something and not be able to get away and just have to suck it up for a while
So I can't wait to try it out n see how it works bc I am pretty much across the waist wearer
Click to expand...
I'm just unsure which 2.0 to get the original size I use 1.5 or the new smaller 1.25
 
This sounds like it’s a welcome improvement for everybody so I’m very excited.
 
DLD said:
This sounds like it’s a welcome improvement for everybody so I’m very excited.
Click to expand...

It surely is
giphy.gif
 
This is the new SiliPad2 that will start shipping with the SiliStretcher2. As you will see in the comparison to the original SiliPad, the SiliPad2 comfort pad is now deeper and softer to conform to the glans of the penis. The new SiliPad2 was designed to minimized fluid retention and add more control for gripping. You may no longer need a SiliCap when using these (ymmv).

The SiliPad2 will start shipping in two weeks and will be available for the 1.25" (3.2cm) and 1.5" (3.8cm) SiliStretcher2.

View attachment 1822069
View attachment 1822070
 
Last edited:
Lightning said:
This is the new SiliPad2 that will start shipping with the SiliStretcher2. As you will see in the comparison to the original SiliPad, the SiliPad2 comfort pad is now deeper and softer to conform to the glans of the penis. The new SiliPad2 was designed to minimized fluid retention and add more control for gripping. You may no longer need a SiliCap when using these (ymmv).

The SiliPad2 will start shipping in two weeks and will be available for the 1.25" (3.2cm) and 1.5" (3.8cm) SiliStretcher2.

View attachment 1822069
View attachment 1822070
Click to expand...

Loving it this is so awesome!
 
85ray said:
I'm just unsure which 2.0 to get the original size I use 1.5 or the new smaller 1.25
Click to expand...
@85ray That is a good question, but I guess you have to see how close you are to the edge of the existing one you have.
I thought about the same thing when the 1.25 came out, but I stuck with the 1.5 because fits just right for me right now with a slight room for growth.
 
DLD said:
This sounds like it’s a welcome improvement for everybody so I’m very excited.
Click to expand...
This is awesome @DLD how you guys will continue to make improvements. The fact that there is feedback and you really consider the information for changes for better product is amazing to me. Some may ask for feedback, but wouldn’t really consider change, but you guys are perfecting it for the brotherhood! (clap)
 
Lightning said:
This is the new SiliPad2 that will start shipping with the SiliStretcher2. As you will see in the comparison to the original SiliPad, the SiliPad2 comfort pad is now deeper and softer to conform to the glans of the penis. The new SiliPad2 was designed to minimized fluid retention and add more control for gripping. You may no longer need a SiliCap when using these (ymmv).

The SiliPad2 will start shipping in two weeks and will be available for the 1.25" (3.2cm) and 1.5" (3.8cm) SiliStretcher2.

View attachment 1822069
View attachment 1822070
Click to expand...
I received my Silistretcher2 and the Vacuum bell is more heavy duty.
Mine came in with two short Duros.
I am really digging the shorter Duro sleeve.

I had posted before that the long wider blue sleeve was the sweet spot for me because the long duro was a little harder for me to put on, but this short duro is great!
The grip is great!

Once I get the Silipad2 I will give an update.
Just seeing how it is built I think this will help in comfort and any brothers that may have been having any glans tip fluid issues.

Until you get the new Silicap2 remember small pinhole on the tip of the Cap to minimize fluid build up. I didn’t come up with the pinhole idea, but it does help.

The more and more you put on the Silistretcher it gets easier to get into a routine.

It’s grow time!
 
JustGrow said:
I received my Silistretcher2 and the Vacuum bell is more heavy duty.
Mine came in with two short Duros.
I am really digging the shorter Duro sleeve.

I had posted before that the long wider blue sleeve was the sweet spot for me because the long duro was a little harder for me to put on, but this short duro is great!
The grip is great!

Once I get the Silipad2 I will give an update.
Just seeing how it is built I think this will help in comfort and any brothers that may have been having any glans tip fluid issues.

Until you get the new Silicap2 remember small pinhole on the tip of the Cap to minimize fluid build up. I didn’t come up with the pinhole idea, but it does help.

The more and more you put on the Silistretcher it gets easier to get into a routine.

It’s grow time!
Click to expand...


Very positive review.
 
JustGrow said:
This is awesome @DLD how you guys will continue to make improvements. The fact that there is feedback and you really consider the information for changes for better product is amazing to me. Some may ask for feedback, but wouldn’t really consider change, but you guys are perfecting it for the brotherhood! (clap)
Click to expand...

Probably because we do is PE 24/7 365! ?We’re not looking to make a fast buck we’re looking to put out the best possible line of PE equipment. To do this we need to get feedback, listen to it, and evaluate it and if it makes sense implement it at any cost. We are also interested in creating unique tools that have not been thought of yet. So you’re correct, we use so you’re correct, we use feedback as a way to improve our product line to be the best equipment available.
 
JustGrow said:
@85ray That is a good question, but I guess you have to see how close you are to the edge of the existing one you have.
I thought about the same thing when the 1.25 came out, but I stuck with the 1.5 because fits just right for me right now with a slight room for growth.
Click to expand...
I'm just wondering if my glad will still get enlarged the same as the original if so I'd probably stick w 1.5
 
85ray said:
I'm just wondering if my glad will still get enlarged the same as the original if so I'd probably stick w 1.5
Click to expand...
@85ray I’ve been using the Silistretcher2 today for a couple of hours split in 1 hour sessions and every time I took it off there is definitely a swell. I think if you were using the 1.5 Vacuum bell and it wasn’t an issue for you then I would stick with that size.

I had the 1.5 and decided to stay with the same size and it is good to go.
 
JustGrow said:
@85ray I’ve been using the Silistretcher2 today for a couple of hours split in 1 hour sessions and every time I took it off there is definitely a swell. I think if you were using the 1.5 Vacuum bell and it wasn’t an issue for you then I would stick with that size.

I had the 1.5 and decided to stay with the same size and it is good to go.
Click to expand...
Only issue I had was pinching on side after few hrs
 
BCquest said:
Got the new SiliStretcher 2.0. Tested it with the DuroSleeve. I was able to hang 10lbs no problems at all. I could see the glans and see any issues. The pull was down the whole length not just behind the glans. Had some color change in the glans but only slight.
Click to expand...

I’m so happy that you’re pleased with your SiliStetcher! If you leave a review in the store you’ll receive some bonus products. I’m looking forward to your review.
 
BCquest said:
Got the new SiliStretcher 2.0. Tested it with the DuroSleeve. I was able to hang 10lbs no problems at all. I could see the glans and see any issues. The pull was down the whole length not just behind the glans. Had some color change in the glans but only slight.
Click to expand...
@BCquest Did you work up to 10lbs or were you already an avid weight hanger?

I use the Silistretcher more as an ADS, but eventually I should give hanging a try and see how it works out for me.

Silistretcher with new short duro sleeve is definitely a plus.
 
JustGrow said:
@BCquest Did you work up to 10lbs or were you already an avid weight hanger?

I use the Silistretcher more as an ADS, but eventually I should give hanging a try and see how it works out for me.

Silistretcher with new short duro sleeve is definitely a plus.
Click to expand...
I started with the 2.5 that came with it originally. Worked through the issues with the silisleeves not made for the heavier weights. Went ahead and got the Length Master. Worked up to 7.5lbs using the reverse pyramid program. Took me about 3weeks to get comfortable but couldn't go above 7.5lbs without deep purple glans. The color would come back immediately when the weight was removed. So when I hooked up the Sillisleeve 2.0 I just went straight for the 10lbs to test. It worked great. Felt a good tug/stretch and it was the whole length of the shaft not concentrated behind the glans. So, very pleased with the results!!!
 
My new SiliStretcher 2.0 is out for delivery today.I really want to see how the 2.0 version compares to the original.The Big thing is I went up to the "Middle Size" one this time where before I had the "Smaller One". With the smaller one all of my Glans were not inside the SS when Hanging and the bottom part of my glans extended outside the SS at the bottom.This is where I was getting a little puffiness/swelling.Cant wait to test it out ! Will post results later..Also,any ideas on when the new longer SiliCaps will be out.I definatly have to get me some.
 
NIK1 said:
My new SiliStretcher 2.0 is out for delivery today.I really want to see how the 2.0 version compares to the original.The Big thing is I went up to the "Middle Size" one this time where before I had the "Smaller One". With the smaller one all of my Glans were not inside the SS when Hanging and the bottom part of my glans extended outside the SS at the bottom.This is where I was getting a little puffiness/swelling.Cant wait to test it out ! Will post results later..Also,any ideas on when the new longer SiliCaps will be out.I definatly have to get me some.
Click to expand...
Me2! Out For Delivery. Kudos on that Enhanced grip soon To Be!
 
fraternize said:
Damn 8-)Right. Posted my review of the Duro & now its time for the *SS*.
Not Hitler's regime! (slap)But MOS all over the PE game: Who's gonna win? The Pioneers.
Click to expand...

There is no battle, in every scenario we are ahead of the competition (if you wanna call it that). The quality of our products is untouchable, the effectiveness of our products is untouchable, with everything we sell there is a lifetime warranty with the exception of sleeves. And we make all of our own equipment so we can make changes on the fly.
 
MOS takes care of product quality, and listens to customers feedback.

Rather then going half arsed at it, like some companies do, using poor quality molds, materials that break easy, and then concentrating on apps to use alongside said product doesn't make much sense when the product is shit to begin with.

MOS would rather have a solid product, then sometime in the future offer an app to build upon the already solid foundation.
 
REDZULU2003 said:
MOS takes care of product quality, and listens to customers feedback.

Rather then going half arsed at it, like some companies do, using poor quality molds, materials that break easy, and then concentrating on apps to use alongside said product doesn't make much sense when the product is shit to begin with.

MOS would rather have a solid product, then sometime in the future offer an app to build upon the already solid foundation.
Click to expand...

I can say say these words better! ❤️
 
Minceydice said:
Whichever would give me the fastest results after a lengthmaster session. Should I be at a tension that actively causes fatigue on it own while wearing the ss, or just below the tension that causes that?
Click to expand...

If you are using the length master as the primary length tool then you will want to wear your silly stretcher at a passive weight resistance for the remainder of the day or as much as possible.
 
You must log in or register to reply here.
Back
Top