Big Schwanz Acht;754781 said:I'll compare as soon as my replacement arrives
Awesome, I am hoping it work like a charm!
Big Schwanz Acht;754781 said:I'll compare as soon as my replacement arrives
Lookn4girth;754796 said:I don't think it will change the way it works. Once you get the valve out, the VV cork was a tight fit and would not fall out.
Big Schwanz Acht;754856 said:I described an optional (less intrusive) way to connect your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to the Vacuvin and it keeps The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] fully intact. I took a section of 1.125" inside diameter plastic tubing and pressed it over the top of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]...the VV pump fits perfectly inside the tube (very tight) and you're free to pump-away to your hearts content. One note, I would keep the length of the tubing to around 3"-4" because you'll nee to be able to reach down into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] valve in order to release the pressure and remove.
Big Schwanz Acht;754856 said:I described an optional (less intrusive) way to connect your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to the Vacuvin and it keeps The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] fully intact. I took a section of 1.125" inside diameter plastic tubing and pressed it over the top of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]...the VV pump fits perfectly inside the tube (very tight) and you're free to pump-away to your hearts content. One note, I would keep the length of the tubing to around 3"-4" because you'll nee to be able to reach down into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] valve in order to release the pressure and remove.
Big Schwanz Acht;754900 said:I've been curious how The VV mod compared to The XX [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], (in my mind [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] would have to limit the power just for legality-sakes)
Randolpho;754901 said:I have an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words] and can verify that you can (and will) definitely hurt yourself if you don't use some common sense as well as practice listening to your body. I believe one way [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] protects themselves is that you'll notice that they always tell you to enter the tube in a completely flaccid state in their instruction manual. It would be very difficult to cause an injury if you use it in this manner. They could always argue this point in a court of law.
Lookn4girth;754951 said:4/17/18
Morning:
Cock ring while doing kegels during morning shower
[words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] for 8 hours followed by 2 hours in the sleeve
Evening:
Warm up for 10 minutes during hot bath
150 wet jelqs
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session 1st set @ 8 minutes, 2nd set @ 7 minutes and 3rd set @ 6 minutes. 50 wet jelqs between each set
CR for 1 hour
Big Schwanz Acht;754983 said:late one last night? (cock ring) lol
Big Schwanz Acht;754983 said:late one last night? (cock ring) lol
Lookn4girth;755006 said:BSA, I need your expert opinion on something. I am trying to get the hang of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] with the VV mod but I am having an issue with the cork. When I go in the tube and pump up the pressure, everything is fine. If I try to put the pump back on and take the pressure up some more, it loses pressure as soon as I put the pump back on the cork. Is there something I am doing wrong.
doublelongdaddy;755019 said:Is there a difference in these valves and the technique in using the vin vac? Meaning is there two different methods of the attachment because of valves?
Big Schwanz Acht;755041 said:The VV cork is a 'one-way' valve and very simple. To determine if it's a defective cork or a sealing issue, take you [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] to your countertop and start pumping. You should be able to compress the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] fully, if it's not strong enough or loses power then it's the cork...if not, it's possible the additional pressure is causing the seal against your body isn't tight enough.
Lookn4girth;755044 said:I will try that out and see how it works. I am leaning towards the cork because the pressure loss is at the cork and not my body. I actually don't have a problem getting the seal initially it is only when I put the pump back on the cork that it loses the pressure. It is almost like you have hit the pip on top of the cork but there is nothing there to hit it
Big Schwanz Acht;755059 said:Interesting. You can also test the cork on what it was designed for, lol
doublelongdaddy;755106 said:Red wine?![]()
Big Schwanz Acht;755059 said:Interesting. You can also test the cork on what it was designed for, lol
Lookn4girth;755130 said:Can you imagine the look on your wine drinking guests faces when they find out where that cork had been, lol
Big Schwanz Acht;755117 said:preferably (but I guess it'd work the same for white/rose)
Big Schwanz Acht;755136 said:you wouldn't dare tell them, would you?
Lookn4girth;755169 said:4/23/18
Not sure what I did different during this session but the expansion after this set was the best I have seen yet. I thought it looked large and the tailor tape confirmed it. I measured 5.5 mid shaft.
Lookn4girth;755169 said:4/23/18
Morning:
Bundled stretches during hot morning shower
[words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] for 8 hours and sleeve for 1 hour
Evening:
Warm up for 10 minutes in hot bath
100 wet jelqs
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session 1st set @ 8 minutes, 2nd set @ 7 minutes and 3rd set @ 6 minutes. Kegels during 1st & 2nd set and 50 wet jelqs between sets
CR for 1 hour
Not sure what I did different during this session but the expansion after this set was the best I have seen yet. I thought it looked large and the tailor tape confirmed it. I measured 5.5 mid shaft.
doublelongdaddy;755190 said:That is great news, now just repeat that process and gains should come that much faster.
Lookn4girth;755215 said:Warm up for 10 minutes during hot bath
100 wet jelqs
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session 1st set @ 8 minutes, 2nd set @ 7 minutes and 3rd set @ 6 minutes. I did kegels during the 1st and 2nd set and 50 wet jelqs between each set
CR for 1 hour
Big Schwanz Acht;755177 said:Not sure what you did?? You've been working your ass off and it sounds like your dick is succumbing to your will.
BTW, did you get your 'leakage' issue resolved?
doublelongdaddy;755236 said:What kind of temporary expansion are you seeing post girth?
Lookn4girth;755280 said:It varies but on average I am seeing from 1/2 to 1".
Big Schwanz Acht;755293 said:I experiment with partially filling the cylinder vs. fully (and all points in-between), just searching for that 'sweet-spot' and perfect seal...for some reason it's never 100% the same each time. I have noticed w/my new set-up (on my original [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]) that I lose a bit of pressure if not pumped to my max...not sure why at this point, but when/if I figure it out I'll let you know
doublelongdaddy;755309 said:That is awesome! This is going to translate to some serious gains! Thanks for letting me know.
Lookn4girth;757090 said:5/1/18
Morning:
Bundled stretches during morning shower
[words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] for 8 hours followed by silicone sleeve for 1.5 hours
Evening:
Warm up for 10 minutes in hot bath
100 wet jelqs
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session 1st set @ 10 minutes, 2nd set @ 9 minutes and 3rd set 8 minutes. Kegels during 1st set. 50 wet jelqs between each set
CR for 1 hour
doublelongdaddy;757098 said:
Lookn4girth;757114 said:5/2/18
Morning:
Warm up during morning shower
[words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] for 8 hours followed by silicone sleeve for 2 hours
I was not able to get in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session as we had guests drop in.