My Journey to 7+

[Lookn4girth]

EZPZ...you'll see on the side of The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] valve a small slot where you can pry the valve completely off, then you'll see The VV cork fills that void almost perfectly. The only thing you have to add is some material (I used a washer, but a rubberband would probably suffice) to wedge the cork in place so when it's being filled with water it won't dislodge...once you've created a seal, the cork won't budge, unless you walk into a wall (yes, I've made that mistake a few times, lol)

Thanks Big, I am going to work on it this evening. I am going to test the sleeve in the tube as soon as I get the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] going

 

[DLD]

Thanks Big, I am going to work on it this evening. I am going to test the sleeve in the tube as soon as I get the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] going

Take pictures if you can. You are going to be blown away by this modification. It takes the awesome [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] and makes it 10 times better for a few bucks!

 

[Lookn4girth]

4/11/18

Morning:

Cock ring while doing kegels during morning shower
[words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] for 8 hours followed by 2 hours in the anti turtle sleeve

I was not able to get to my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session as I was trying to do the mod on my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words]. I followed the advice of BSA and had a hell of a time trying to get the valve out to replace it with the VV. I finally got pissed and broke out the 20v Dewalt with a drill bit and after a couple of minutes, it was done. The valve was destroyed but it was out and the VV cork went right in its place. I also found that the VV cork went right in and stayed in place with no need for any other parts

 

[Big Schwanz Acht]

I finally got pissed and broke out the 20v Dewalt with a drill bit and after a couple of minutes, it was done. The valve was destroyed but it was out and the VV cork went right in its place. I also found that the VV cork went right in and stayed in place with no need for any other parts

[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] must have done a redesign, cuz my valve popped-off by prying w/a mini flat-tipped screwdriver...way to go 'All Caveman' on it. (If it doesn't fit, get a bigger hammer, lol)

 

[DLD]

BM must have done a redesign, cuz my valve popped-off by prying w/a mini flat-tipped screwdriver...way to go 'All Caveman' on it. (If it doesn't fit, get a bigger hammer, lol)

Does this change the way we use the vin vac?

 

[Big Schwanz Acht]

Does this change the way we use the vin vac?

I'll compare as soon as my replacement arrives

 

[Lookn4girth]

BM must have done a redesign, cuz my valve popped-off by prying w/a mini flat-tipped screwdriver...way to go 'All Caveman' on it. (If it doesn't fit, get a bigger hammer, lol)

Thanks B. I am not sure if they redesigned it or not but that damn valve would not move with a screwdriver. I was worried I would crack the pump at the top. I did try out the VV mod last night and all I can say is holy crap. It may be me but the VV mod seemed a lot more powerful than the hand pump was on my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x30[/words]. I will have to get use to the larger cylinder of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] but the expansion was something to see. I even got a "damn" from the wife. I plan to test out the sleeve over the weekend and will let you know how it works

 

[Lookn4girth]

Does this change the way we use the vin vac?

I don't think it will change the way it works. Once you get the valve out, the VV cork was a tight fit and would not fall out.

 

[Lookn4girth]

4/12/18

Cock ring while doing kegels during morning shower
[words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] for 8 hours followed by anti turtle sleeve for 1 hour

Evening:

Warm up for 10 minutes during hot bath
100 wet jelqs
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session 1st set @ 8 minutes, 2nd set @ 7 minutes and 3rd set @ 6 minutes. 25 wet jelqs between sets
CR for 1 hour

 

[Lookn4girth]

4/13/18

Morning:

Manual stretches during morning shower
[words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] for 4.5 hours

I was not able to do my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session this day as I had a lot going on. The past week was pretty hectic and I missed 2 days of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session. Hoping the next week will be better.

4/14/18

Rest day

4/15/18

Got in some light stretching during morning shower and used the anti turtle sleeve for 1 hour

 

[DLD]

I'll compare as soon as my replacement arrives

Awesome, I am hoping it work like a charm!

 

[DLD]

I don't think it will change the way it works. Once you get the valve out, the VV cork was a tight fit and would not fall out.

Lets see how it goes for BSA.

 

[Big Schwanz Acht]

I described an optional (less intrusive) way to connect your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to the Vacuvin and it keeps The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] fully intact. I took a section of 1.125" inside diameter plastic tubing and pressed it over the top of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]...the VV pump fits perfectly inside the tube (very tight) and you're free to pump-away to your hearts content. One note, I would keep the length of the tubing to around 3"-4" because you'll nee to be able to reach down into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] valve in order to release the pressure and remove.

 

[Lookn4girth]

I described an optional (less intrusive) way to connect your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to the Vacuvin and it keeps The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] fully intact. I took a section of 1.125" inside diameter plastic tubing and pressed it over the top of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]...the VV pump fits perfectly inside the tube (very tight) and you're free to pump-away to your hearts content. One note, I would keep the length of the tubing to around 3"-4" because you'll nee to be able to reach down into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] valve in order to release the pressure and remove.

I read that in another one of your post. It was a little late for me but it sounds like a good idea.

 

[DLD]

I described an optional (less intrusive) way to connect your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to the Vacuvin and it keeps The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] fully intact. I took a section of 1.125" inside diameter plastic tubing and pressed it over the top of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]...the VV pump fits perfectly inside the tube (very tight) and you're free to pump-away to your hearts content. One note, I would keep the length of the tubing to around 3"-4" because you'll nee to be able to reach down into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] valve in order to release the pressure and remove.

I saw that yesterday and thought it was brilliant. it may be a bit cumbersome but that is easy to work around. All and all I think it is pretty smart!

 

[Big Schwanz Acht]

I've been curious how The VV mod compared to The XX [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], (in my mind [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] would have to limit the power just for legality-sakes)

 

[Randolpho]

I've been curious how The VV mod compared to The XX [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], (in my mind [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] would have to limit the power just for legality-sakes)

I have an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words] and can verify that you can (and will) definitely hurt yourself if you don't use some common sense as well as practice listening to your body. I believe one way [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] protects themselves is that you'll notice that they always tell you to enter the tube in a completely flaccid state in their instruction manual. It would be very difficult to cause an injury if you use it in this manner. They could always argue this point in a court of law.

 

[Lookn4girth]

I have an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words] and can verify that you can (and will) definitely hurt yourself if you don't use some common sense as well as practice listening to your body. I believe one way [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] protects themselves is that you'll notice that they always tell you to enter the tube in a completely flaccid state in their instruction manual. It would be very difficult to cause an injury if you use it in this manner. They could always argue this point in a court of law.

Good point Randolpho. I can see where the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] could cause injury. I have used mine some and found that it is easier for your testicles to get sucked in. I think I fall in the category of being between the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x30[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] so I have to be more careful with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words].

 

[Lookn4girth]

4/16/18

Morning:

Bundled manual stretches during morning shower
[words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] for 8 hours followed by anti turtle sleeve for 1 hour

Evening:

Warm up for 10 minutes in hot bath
150 wet jelqs
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BM[/words] session 1st set @ 8 minutes, 2nd set @ 7 minutes and 3rd set @ 6 minutes. 50 wet jelqs between sets
CR for 1 hour

 

[DLD]

Thank you to the Brothers who are supporting other Brothers routine logs. This is one of the most important places we need to support each other. Please Brothers, start supporting one another progress!