Hey guys, I have hair growing all the way up my shaft to the head of my penis. I suspect its from a overly tight circumsicism and from Penis Enlargement.

It's extremely annoying when trying to Penis Enlargement and it's not particular pleasant during sex. I used to have a daily shave but it leaves my skin a little raw sometimes and it's long winded.

Is there anything I can do that's more permanent? Perhaps hair removal cream? Anyone else had this problem, if so any remedies.

Thank you
 
Hey!

I have hair myself too ... I wouldn't suggest removal creams, it's about the same as shaving, it can be even more irritant on the skin. And most of them are not suggested for use on your private parts.

Plucking is semi-permanent, takes a whole lot of time though. But it's the most inexpensive way you can in my opinion.
I shave daily and my skin is alright though. But then again, I've shaved my down under since I was teenager.

Shave or pluck. If you're loaded you could opt for laser hair removal, but I haven't heard / read anything about it, but it's one way to go I think.
 
hepcat;509663 said:
That's why I was asking. I didn't think you could grow on the circumcision line, but for all I know you could be some mutant like the Toxic Avenger.:P Is it just a stray hair here and there right before the circumcision line, or is it just as thick, or almost as thick as the base of your penis??:(

It's not like a full bush haha thinking about it that would be funny. I just have hair pours (if that's how you spell it) all up my shaft and underneath. It's obviously where the skin has been brought up from the base when I had my circum as a kid.

Hmmm plucking sounds painful...
 
Get used to shaving, plucking or waxing. It is one of the side effects of Penis Enlargement, skin becomes displaced and when the penis becomes longer the hair line changes. Not a big deal really, after you get used to shaving it takes two seconds in the shower and it keeps you looking good all around. Most men have an unruly pubic region!
 
Since I have started to use [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] a year ago, I have started to shave regularly as you get the best suction with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] when you are shaved well. I have just made a routine out of it, I shave every 2-3 days, usually before bed after a jelq session, so the skin can get a bit of rest after shaving. I do it in the shower, make sure to use a good razor, personally I like the ones from gillette power fusion with vibrating option. I would not pluck hair on there, I have tried once, hurts like hell!! waxing too!! Your penis has very sensitive skin, so take a good care of it. Shaving right after a jelq session, in the shower goes really smoothly as your skin is warm upped pretty well. And really those gillette razors can last "almost" forever if you only use it to shave your private parts, so it's not really expensive either.
 
Lighthearted but still serious, I thought someone on here was going to zap their dick&balls with a Tria so we would finally know whether it works. There was a 100 page thread on here, which I read many times, but I don't recall anyone having actually tried it on their junk yet.
 
toucHydromaxyjunk;510430 said:
Lighthearted but still serious, I thought someone on here was going to zap their dick&balls with a Tria so we would finally know whether it works. There was a 100 page thread on here, which I read many times, but I don't recall anyone having actually tried it on their junk yet.

I've heard good and bad about the Tria, the general arguement that it's harder to get rid of thicker hair and that it takes a long time for the removal to become permanent. Of course these people only talked about using it on the legs or other basic areas, I haven't heard of it being used on the genitals.
 
I did some web searches and I didn't come up with any horror stories regarding male genitals, at least with light skin and dark hair. However, I am having a heck of a time figuring out which safety glasses to get. I know they claim you don't need them but nonetheless I want them. As near as I can tell it is ~ 810nm Infrared, and yet I often see others purchasing safety glasses for green/blue lasers which makes no sense at all.
 
toucHydromaxyjunk;510437 said:
I did some web searches and I didn't come up with any horror stories regarding male genitals, at least with light skin and dark hair. However, I am having a heck of a time figuring out which safety glasses to get. I know they claim you don't need them but nonetheless I want them. As near as I can tell it is ~ 810nm Infrared, and yet I often see others purchasing safety glasses for green/blue lasers which makes no sense at all.

Are you going to try the Tria?
 
Jaronimo;510463 said:
Are you going to try the Tria?
Well I ordered one a few hours ago. Can't say that I look forward to using it on the pee-pee, but I have some irritating back hair to get rid of anyways LOL. It still disturbs me that so many have ordered the wrong glasses based on the ebay and amazon related purchases. I wound up ordering some safety glasses which shield the Infrared among other spectrum. $40 >:(
 
toucHydromaxyjunk;510473 said:
Well I ordered one a few hours ago. Can't say that I look forward to using it on the pee-pee, but I have some irritating back hair to get rid of anyways LOL. It still disturbs me that so many have ordered the wrong glasses based on the ebay and amazon related purchases. I wound up ordering some safety glasses which shield the Infrared among other spectrum. $40 >:(

Well, if you wind up getting experimentive with the Tria and your junk, let me know. lol
 
Jaronimo;510542 said:
It's a hand held laser hair removal device, check it out on amazon.com.


*wonders if they private label it at a discount:)


The new [words=http://www.mattersofsize.com/join-now.html]MOS[/words] Laser! Sounds very cool if it actually works:)
 
Forget that! Damn they are like $350! That is expensive. I bet we could make our own model for under $100!
 
doublelongdaddy;510553 said:
Forget that! Damn they are like $350! That is expensive. I bet we could make our own model for under $100!

Wow I think the price actually went up fifty bucks since I last looked at it maybe almost a year ago, that's some ridiculous cash to gamble for something that may not work.
 
Jaronimo;510591 said:
Wow I think the price actually went up fifty bucks since I last looked at it maybe almost a year ago, that's some ridiculous cash to gamble for something that may not work.

Yeah, but if it did work and I could get it manufactured cheap we could have a nice little money maker and save people $100's of dollars.
 
doublelongdaddy;510734 said:
Yeah, but if it did work and I could get it manufactured cheap we could have a nice little money maker and save people $100's of dollars.

If you're serious about it I am extremely interested.
 
Jaronimo;510751 said:
If you're serious about it I am extremely interested.

It is something I will discuss in our next meeting. I checked for affiliate discounts but they are only giving 8%! That is not even enough to give you guys a discount! Usually, when I make a deal with a affiliate I will forfeit a large part of my commission to make the price as low as possible but 8%? That is a joke. They really have no competition and the device, from what i see, could be made for less than $100, probably closer to $50 (my cost) after all the set up. Set up is where it gets expensive, mainly for plastic molds and tooling, but in this case we may be able to find those parts off the shelf. I would need to investigate further but I think it could be doable.
 
doublelongdaddy;510761 said:
It is something I will discuss in our next meeting. I checked for affiliate discounts but they are only giving 8%! That is not even enough to give you guys a discount! Usually, when I make a deal with a affiliate I will forfeit a large part of my commission to make the price as low as possible but 8%? That is a joke. They really have no competition and the device, from what i see, could be made for less than $100, probably closer to $50 (my cost) after all the set up. Set up is where it gets expensive, mainly for plastic molds and tooling, but in this case we may be able to find those parts off the shelf. I would need to investigate further but I think it could be doable.

It's badass that you're looking to accept/create more challenges for us members to benefit from even when you have a pretty busy time already revamping the site and everything, you're the man, DLD.
 
Well, there are other brands, but frankly I was inclined to go with the industry leader being that it has the capability of burning a hole in things.
 
My amazon Tria order wound up getting canceled because they ran out of stock and/or had a shipment of damaged goods. I'll have to reorder but I think I will do a little more research into competing products or maybe try to get one locally. I'm concerned that there may be reliability issues with these things and I'd rather pay a little more to be able to swap it out at a store.
 
Jaronimo;511371 said:
That's some serious fucking cash, bro.
Well so far there is the Tria laser @ $350, and then there are some IPL models such as the Philips Lumea @ $579 (hard to find in USA). There are also a number of cheaper IPL such as the Remington IPL6000 @ $250. But I am concerned about power level (lack of) and the need to purchase additional cartridges.

I am kinda leaning towards the Remington because it is a plug in versus battery based, and you can replace the 1500 flash cartridges for about $25. I worry about battery based stuff because it just wouldn't survive as an appliance. The downside is that I hear that it really doesn't last 1500 flashes and it takes more application than the stronger Tria would.
 
Last edited:
I bet you'd end up wasting more money owning the tria, I'd rather try the Remington if I were to purchase such a device just because I'd rather waste more time and less money.
 
Jaronimo;511378 said:
I bet you'd end up wasting more money owning the tria, I'd rather try the Remington if I were to purchase such a device just because I'd rather waste more time and less money.
I think that the power level of the Tria is like BAM and it really kills the follicle. The current crop of IPL models is likely not enough energy to permanently kill the follicles, but they do claim to "stun" them for maybe 6 months at a time. Perhaps that is the better way, at least I would be happy with not having to shave the area daily.

I do see that the Remington is available in some dept stores so my plan is to pick one up at Walmart or Target.
 
toucHydromaxyjunk;511381 said:
I think that the power level of the Tria is like BAM and it really kills the follicle. The current crop of IPL models is likely not enough energy to permanently kill the follicles, but they do claim to "stun" them for maybe 6 months at a time. Perhaps that is the better way, at least I would be happy with not having to shave the area daily.

I do see that the Remington is available in some dept stores so my plan is to pick one up at Walmart or Target.

Well eventually the hair follicle should die after a while don't you think?
 
Jaronimo;511389 said:
Well eventually the hair follicle should die after a while don't you think?
I'm thinking no, but it may be of little consequence whether it dies or stops growing for six months at a time.
 
I really don't mind shaving, it becomes as easy as the face once you get it down.
 
Well, after my Tria order got canceled (some problem with damaged goods from the supplier) all of the cheap places pretty much dried up. So that's back up to $400. I checked for other devices, and nothing is sold in any local stores so I placed another order. I decided to go with a Silk'n Flash & Go for $300. It's an IPL and also not as powerful as a Tria would be (Tria is considerably stronger that most every other home system), but I like the lack of battery and also that it has replaceable bulbs.
 
Got my device in the mail today. A Silk'n Flash & Go.

Penis EnlargementW! Penis EnlargementW! Penis EnlargementW!

Did some test areas before I hit the sack.
 
toucHydromaxyjunk, I hope you'll share with us your findings. It's looking really interesting. At this point I'm sticking to shaving, but it would be interesting especially for a bit of my facial hair that I would like to get rid of permanently.
 
Well, I shaved and did about 10 flashes around the base and under the sack. At max strength it's a bit of a poke, like doorknob static pop. It's enough energy to singe hairs at that level, because the test spots on my leg I didn't bother shaving first and they smoked up a bit.

Instructions are to treat at two week intervals for a few times, then four weeks, then as needed.

I'm going to wait a little while to check for reactions, then I will probably hit some areas along the shaft and then call it quits for a couple of weeks.
 
toucHydromaxyjunk;512914 said:
Well, I shaved and did about 10 flashes around the base and under the sack. At max strength it's a bit of a poke, like doorknob static pop. It's enough energy to singe hairs at that level, because the test spots on my leg I didn't bother shaving first and they smoked up a bit.

Instructions are to treat at two week intervals for a few times, then four weeks, then as needed.

I'm going to wait a little while to check for reactions, then I will probably hit some areas along the shaft and then call it quits for a couple of weeks.

How's your skin doing so far?
 
Jaronimo;512969 said:
How's your skin doing so far?
Nothing bad to speak of. Yesterday after I posted I did the shaft, probably six flashes. Most flashes are just a small thump and some warmth, though a couple gave a bit of a jolt. Be strong man, be strong LOL. These were all at max strength (5).

So I'm just leaving it until a couple of weeks and then I will flash them again. Hard to tell if growth is stunned or whatnot at this point. It's only been 24hrs. I have a little bit of stubble right now but I didn't shave really close yesterday so it could just be that. Obviously over the next few days I will be able to take a better inventory.
 
Jaronimo;513222 said:
So the hair never fell out after you zapped 'em?
No. Perhaps in the future, but no nothing fell out. Looks/feels the same.

It's only be 24hr but I'm not feeling any stubble in many areas. Not sure if I will wait a full two weeks. I think if I start to notice some growth in a few days I will shave again and flash. I didn't really hit all areas. I will have to check what is safe.
 
I make my living with aesthetic lasers, which includes laser hair removal. Im sorry to tell you guys those small systems will never permantly remove or reduce your hair. They MIGHT temporarily remove hair for a couple weeks but that is all. The hair will always grow back %100. They are a better option than shaving and waxing especially for people with light colored hair(grey, white, red, or blonde). If you don't want to spend the expense of real lasers like an alexandrite or diode, then try Nair, and save the money you were going to spend on those $400 [words=http://fleshlight.sjv.io/c/348327/302851/4702]FleshLights[/words] on a quality Penis Enlargement device.
 
Chas79;513262 said:
I make my living with aesthetic lasers, which includes laser hair removal. Im sorry to tell you guys those small systems will never permantly remove or reduce your hair. They MIGHT temporarily remove hair for a couple weeks but that is all. The hair will always grow back %100. They are a better option than shaving and waxing especially for people with light colored hair(grey, white, red, or blonde). If you don't want to spend the expense of real lasers like an alexandrite or diode, then try Nair, and save the money you were going to spend on those $400 [words=http://fleshlight.sjv.io/c/348327/302851/4702]FleshLights[/words] on a quality Penis Enlargement device.

Can you elaborate on alexandrites and diodes?
 
Good discussion.

I was reading some articles yesterday and though there are many opinions, I personally came to a conclusion that a stronger laser might not be the best choice for genitals and that IPL was ideally suited for the penis and scrotum because the follicles are shallow. I'm thinking it is overkill. We think they are stubborn because they are thick hairs, but the opposite may in fact be true as I have read some success stories about no regrowth. However, I cannot say yet if my IPL is working for me. Seems smoother than I would normally expect after two days without shaving. I barely see any growth and I only flashed one pass.
 
toucHydromaxyjunk;513328 said:
Good discussion.

I was reading some articles yesterday and though there are many opinions, I personally came to a conclusion that a stronger laser might not be the best choice for genitals and that IPL was ideally suited for the penis and scrotum because the follicles are shallow. I'm thinking it is overkill. We think they are stubborn because they are thick hairs, but the opposite may in fact be true as I have read some success stories about no regrowth. However, I cannot say yet if my IPL is working for me. Seems smoother than I would normally expect after two days without shaving. I barely see any growth and I only flashed one pass.

I believe they are talking about a low level laser, one that would not burn.
 
doublelongdaddy;513369 said:
I believe they are talking about a low level laser, one that would not burn.
The Tria laser is supposedly 7 to 20 joules per cm2, and the IPL which I have maxes out at around 5 joules per cm2. Professional systems are going to support much more energy.

From what I read, 7 is about the minimum for killing a follicle. But my opinion, as weak as it is, is that penis/scrotum doesn't need as much energy because they are shallow follicles. I would have tried the Tria had my order not gotten screwed up and the discounted price lost. But I was always kinda worried about the battery and probably that it would die in a year or two, so I wanted a plug-in unit.

The other thing, I dunno but I feel a personal system is warranted here. For one thing, I do it with a hard-on because I do not think it can be effective flashing a wrinkled package.
 
Jaronimo;513306 said:
Can you elaborate on alexandrites and diodes?

Alexandrites and diodes are mediums inside the laser that produce the wavelength of light. Alexandrite has a wavelength of 755nm and a the diodes are 810nm( I think). The energy of these devices are adjustable and that determines by skin typed and then hair typed. My lasers require a 220V wall outlet and can produce a lot of power.
 
Chas79;513396 said:
Alexandrites and diodes are mediums inside the laser that produce the wavelength of light. Alexandrite has a wavelength of 755nm and a the diodes are 810nm( I think). The energy of these devices are adjustable and that determines by skin typed and then hair typed. My lasers require a 220V wall outlet and can produce a lot of power.

What kind if at home products use this and about how much do they run?
 
Do I hear the future hum of the [words=http://www.mattersofsize.com/join-now.html]MOS[/words] Laser Removal Gun?:):):)
 
Jaronimo;513420 said:
What kind if at home products use this and about how much do they run?

I don't think any of the at home systems are actual lasers. A true laser is a pure monochromatic colomnated wavelength of light. Ipl( intense pulsed light) is a flash lamp bulb and the light is then filtered to a broad range of wavelengths. So instead of exactly 755nm and ipl might be 640nm to 1300nm. Ipl systems are great units for photo facials that improve redness and dyschromia(brown discoloration). Ipl's also are effective for hair removal. Remember gentleman there is no device on earth that will permanently remove hair. Permanent REDUCTION is the end goal. The at home system are basically shaving with light. Less irritation and no more accidental cuts.
 
Back
Top