finally found a way to fix the bend

P

pogzee

Active member
this is masterminds idea mainly..........then templnite stepped in and then DLD made the "D" shape idea....then i used my brain..lol and incorporated everyones thinking into this.
i purchased the dissasembling pump as told and found by mastermind and i always had faith in his method to fix if u see in my posts...
see the picss first

my bend




inside the pump




this is the adjustment i made..



method
as u can see the yellow thing is a stress ball cut out in 'D' shape to push against the bend
the purple thing on top left is theraband and it is in many layers and thick so more pressure is there to push the penis
the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap at below left is to provide support at base so the base of penis stays in place and doesnt get pushed to the left....

anyone who wants to fix or create a curve ,they DEFINITELY have to try this as it is the cheapest and very effective method....

did 20-30 mins session today....it felt GOOOOOD !!!!

so thanks to the guys who helped me out through this....will post results in a month
 
Looks good man :) And your bend is not that serious in a couple of months it should be gone.
 
I have same left bend as you except in additional l also have a 30 degree down curve. I love to try this vs using a tight tube to pack it straight. Nice creatively! What kind of cylinder is that? And how did you get the band in???
 
Last edited:
pogzee;658734 said:
this is masterminds idea mainly..........then templnite stepped in and then DLD made the "D" shape idea....then i used my brain..lol and incorporated everyones thinking into this.
i purchased the dissasembling pump as told and found by mastermind and i always had faith in his method to fix if u see in my posts...
see the picss first

my bend




inside the pump




this is the adjustment i made..



method
as u can see the yellow thing is a stress ball cut out in 'D' shape to push against the bend
the purple thing on top left is theraband and it is in many layers and thick so more pressure is there to push the penis
the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap at below left is to provide support at base so the base of penis stays in place and doesnt get pushed to the left....

anyone who wants to fix or create a curve ,they DEFINITELY have to try this as it is the cheapest and very effective method....

did 20-30 mins session today....it felt GOOOOOD !!!!

so thanks to the guys who helped me out through this....will post results in a month
Click to expand...
perfect it's not about d shape. Just use anything to create an opposition curve. Just is you do this daily without fail in 10 days you will see the result.

To the fact I corrected my curve in 10 days. I wrote on purpose one month for nobody would believe me. Now for more quick results buy a heating pad and wrap around your cylinder. But be careful with the temperature adjustments.
 
Woah dude ten days:O ? I'm going to buy some fun tak to gimmme a upward curve!!!!
 
master_mind;658750 said:
perfect it's not about d shape. Just use anything to create an opposition curve. Just is you do this daily without fail in 10 days you will see the result.

To the fact I corrected my curve in 10 days. I wrote on purpose one month for nobody would believe me. Now for more quick results buy a heating pad and wrap around your cylinder. But be careful with the temperature adjustments.
Click to expand...

what will the heat pad do mastermind ????
infact mastermind..i can already feel the changes a little....usually after my girth work when i wear the cockring my penis still curves to the left....today its a bit straighter:blush:
 
kofandy2001;658747 said:
I have same left bend as you except in additional l also have a 30 degree down curve. I love to try this vs using a tight tube to pack it straight. Nice creatively! What kind of cylinder is that? And how did you get the band in???
Click to expand...

if u see the pump clearly...u can see it can be separated in 3 peices....so it makes it easier to make adjustments and put something inside.....
plus dont u think this is much cheaper than the one you had advised and effective ??? lol

here is the link to the pump
Buy Sell Medigold Penis Enlargement Pump Imported Online | Best Prices in India: Rediff Shopping
 
Well keep us posted on your result. I love to see pictures again when its straight. I will keep my routine for now! Mine is slightly straighter too since last picture taken on june. 2 more months and l will snap some pictures.
 
Funny enough, I have similar bend including an upward one but I'm not bothered at all.
 
Be blessed that it dosent effect you! Mine bother the shit out of my wife. It eithers hurts her or it dosent feel good. It never bother me tho......
 
pogzee;658734 said:
this is masterminds idea mainly..........then templnite stepped in and then DLD made the "D" shape idea....then i used my brain..lol and incorporated everyones thinking into this.
i purchased the dissasembling pump as told and found by mastermind and i always had faith in his method to fix if u see in my posts...
see the picss first

my bend




inside the pump




this is the adjustment i made..



method
as u can see the yellow thing is a stress ball cut out in 'D' shape to push against the bend
the purple thing on top left is theraband and it is in many layers and thick so more pressure is there to push the penis
the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap at below left is to provide support at base so the base of penis stays in place and doesnt get pushed to the left....

anyone who wants to fix or create a curve ,they DEFINITELY have to try this as it is the cheapest and very effective method....

did 20-30 mins session today....it felt GOOOOOD !!!!

so thanks to the guys who helped me out through this....will post results in a month
Click to expand...


Ignore my pother post, I see what you are doing now. I hope this really works out!
 
There will be nothing as D shape . Just have to fill the gaps in the pump to create an opposite bend. We have to use soft material to fill the gaps so the penis does not hurt.
 
master_mind;658882 said:
There will be nothing as D shape . Just have to fill the gaps in the pump to create an opposite bend. We have to use soft material to fill the gaps so the penis does not hurt.
Click to expand...

How do you fill in this gaps? The material in the pump is held in place but...how? Because if it moves, it isn't in the right position to correct the bend.
 
thoughtfulgold;672505 said:
How do you fill in this gaps? The material in the pump is held in place but...how? Because if it moves, it isn't in the right position to correct the bend.
Click to expand...

nope there is no right position or exact place where u can put it....cuz the size of penis will change from time to time........so u need to focus that the bend is getting pushed the other way.....no one can be so acccurate to focus at a exact point

try this method and u will figure it out its very simple.....
i remmeber how i used to be freaking out...ask these guys hahhaa
 
Is there an ideal bend direction that one could call desirable? I'm just curious because I recall a few discussions on it in the past. Figured there's a consensus by now.
 
Probably either up or down as it has a function, and looks sort of right. When it goes to either side people feel deformed I guess. I have mine straight, and I think thats just fine :cool:
 
templnite;672568 said:
Probably either up or down as it has a function, and looks sort of right. When it goes to either side people feel deformed I guess. I have mine straight, and I think thats just fine :cool:
Click to expand...

Function being just better for targeting the g spot. Kinda gotta figure massive girth just means you can't miss though.
 
Has this worked for you MasterMind (or anyone else who is using this method)?
 
I'm pretty sure it worked for mastermind, but pogzee I don't remember
 
Longth;672556 said:
Is there an ideal bend direction that one could call desirable? I'm just curious because I recall a few discussions on it in the past. Figured there's a consensus by now.
Click to expand...

i guess upwards for the g spot
 
templnite;672608 said:
I'm pretty sure it worked for mastermind, but pogzee I don't remember
Click to expand...

that was the time i used for like 5 days and then i had my dark days so....after that i wanished and did no pe for 3 months...
so im getting back into it....dam these small small injuries can take up so much time...lol
 
Damn I guess just mastermind who it worked for, also who invented it. I wish he was still around (crying), but no he abandoned me <:( like a baby in the trash. Who will I practice my spells on
 
templnite;672746 said:
Damn I guess just mastermind who it worked for, also who invented it. I wish he was still around (crying), but no he abandoned me <:( like a baby in the trash. Who will I practice my spells on
Click to expand...

lol :)
 
Longth;672820 said:
Why not just push her butt back so it's just angled that way. Seems to work for me so far.
Click to expand...

well...its not me trying to create a curve....i already have a bend which i need to fix...lol
 
pogzee;672863 said:
well...its not me trying to create a curve....i already have a bend which i need to fix...lol
Click to expand...

It takes time and consistent effort but many have corrected and created curves.
 
doublelongdaddy;672931 said:
It takes time and consistent effort but many have corrected and created curves.
Click to expand...

I'm guessing this could be applied to tilts?

Sounds like a pretty good maintenance routine to persue. Like a year of jelqing to cement and correct my tilt. How long of a jelqing session were you doing to make the curve happen?
 
Not that type of tilt. It's kinda like a twist. So the urethra is like "/". Not a huge issue but it would be great to fix it inherently with a year of cementing with jelqs. Just use a grip that twists it back or something.
 
DLD i was beginning this bend routine again....

now in the thread as u can see the pictures....i had pumped flaccid and thats why ur seeing a bend the opposite way in the pump.....
now if i pump erect then my penis is rather straight compared to the flaccid pump where the bend created in opposite direction against the actual bend....

what do u suggest.....erect or flaccid ?
 
pogzee;700519 said:
DLD i was beginning this bend routine again....

now in the thread as u can see the pictures....i had pumped flaccid and thats why ur seeing a bend the opposite way in the pump.....
now if i pump erect then my penis is rather straight compared to the flaccid pump where the bend created in opposite direction against the actual bend....

what do u suggest.....erect or flaccid ?
Click to expand...

As close to erect as possible.
 
doublelongdaddy;700553 said:
As close to erect as possible.
Click to expand...

but i try to stay erect...it becomes impossible after 2-3 mins inspite of watching adult entertainment...then what to do ????
mmostly i dont even know if i am erect in the pump or no

isnt it possible for me to pump flaccid or what is the difference ????
my main purpose is the bend... not expansion
 
pogzee;700639 said:
but i try to stay erect...it becomes impossible after 2-3 mins inspite of watching adult entertainment...then what to do ????
mmostly i dont even know if i am erect in the pump or no

isnt it possible for me to pump flaccid or what is the difference ????
my main purpose is the bend... not expansion
Click to expand...

...........anyone ?
 
pogzee;700908 said:
...........anyone ?
Click to expand...

If you want to bend you still have to be erect, semi erect better than nothing. If you're having trouble staying up try to edge to get hard again OR just try to rub yourself til you get hard again. Also very importantly KEGEL
 
kyomoto;700951 said:
If you want to bend you still have to be erect, semi erect better than nothing. If you're having trouble staying up try to edge to get hard again OR just try to rub yourself til you get hard again. Also very importantly KEGEL
Click to expand...

Inspite of edging and trying to keep it up ......my erectiion subsides very quickly .....by the time I set up the pump with my erectiion ....it goes away ....now what to do ?
I still try to get erect but it takes time
 
pogzee;700976 said:
Inspite of edging and trying to keep it up ......my erectiion subsides very quickly .....by the time I set up the pump with my erectiion ....it goes away ....now what to do ?
I still try to get erect but it takes time
Click to expand...

have you tried kegeling frequently
 
kyomoto;700978 said:
have you tried kegeling frequently
Click to expand...

Kegels are vital to good erection quality. If we grow without strengthening the pelvic floor muscles we will have difficulty attaining a 100% erection as these muscle are responsible for the increase of blood flow needed.
 
pogzee said:
this is masterminds idea mainly..........then templnite stepped in and then DLD made the "D" shape idea....then i used my brain..LOL and incorporated everyones thinking into this.
i purchased the dissasembling pump as told and found by mastermind and i always had faith in his method to fix if u see in my posts...
see the picss first

my bend




inside the pump




this is the adjustment i made..



method
as u can see the yellow thing is a stress ball cut out in 'D' shape to push against the bend
the purple thing on top left is theraband and it is in many layers and thick so more pressure is there to push the penis
the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap at below left is to provide support at base so the base of penis stays in place and doesnt get pushed to the left....

anyone who wants to fix or create a curve ,they DEFINITELY have to try this as it is the cheapest and very effective method....

did 20-30 mins session today....it felt GOOOOOD !!!!

so thanks to the guys who helped me out through this....will post results in a month
Click to expand...

I remember this post and the photo. You placed something inside the pump at the side where the bend is located. It will never be well with Threak-X wherever he is.
 
You must log in or register to reply here.
Back
Top