Bigger pump more expansion?

[Krt919]

I am curious to know if anyone has automatically had bigger expansion inside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] when going to a bigger model. I have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] and I think my expansion in girth is blocking me from going past 6.5" mark while pumping. I come out with gaitor bite and was wondering if I were to goto a bigger model I could pass 6.5" first time using it. I am looking at the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] as the next step up.

 

[Zambrodom3]

Now I pump, but I am not a pumper (someone that has knowledge and has used over 2-3 pumps for years). I am a proud owner of an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and that only. As much as I have read around the site, when I was wondering on what pump to buy, pumpers have wholeheartedly advised me to pick a smaller pump. The more your penis fills the pump- the better the expansion will be. But you should always have AT LEAST 0,5 inches above your girth as pump size.

 

[Krt919]

Now I pump, but I am not a pumper (someone that has knowledge and has used over 2-3 pumps for years). I am a proud owner of an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and that only. As much as I have read around the site, when I was wondering on what pump to buy, pumpers have wholeheartedly advised me to pick a smaller pump. The more your penis fills the pump- the better the expansion will be. But you should always have AT LEAST 0,5 inches above your girth as pump size.

I like the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] a lot and I should have been more clear in my post stating I cant pass 6.5" in length while in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. My girth after pumping is a solid 6" as I typically gain a half inch girth while pumping.
So would my girth restricting my penis hitting higher lengths in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]?

Also would the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] allow me to get farther in length since the girth will have more room to expand first time using It?

 

[Iwannabig1]

If my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] gets here this week I'll be able to tell you.

 

[Krt919]

If my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] gets here this week I'll be able to tell you.

I would love to know how you made out with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. Keep me posted.

 

[runningignus]

Pumping is more for girth than to surpass a new length goal. You would need a skinnier tube to get more for length. Try doing a full set or 2 of stretches before going into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. That usually gives me my longest record. When I get a good stretch before going into my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words], I easily get past the 7 inch mark. My second time around, I get past the final line on the top. I also have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. I get the same length, just no gaitor bite. I get gaitor marks whether I do long or short sets with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and sleeve inserts, and I'm only 5.5 inches girth. That tells you the expansion is there. I'm stopping today to get the vacuvin or rabbit to increase the vacuum and try to max the tube out this time around. You can see my size and with no other tools, I can almost max the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words], length and girth wise. With the wine vac mod, I believe I can max it out. It's all in how you approach the situation. I have some pics of me in my thread so you can see. Good luck with your endeavor.

 

[runningignus]

Also, you can do shorter sets and still get the expansion you want. Check out DanClizer's for more info and DLD's girth blasters routine. For length, your gonna have to do stretches before going into the tube. Length is length and girth is girth, they don't intertwine unless You know how to properly execute exercises before and after your sessions. Good luck.

 

[Iwannabig1]

I would love to know how you made out with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. Keep me posted.

Hey my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] came today. Will not get home till tomorrow and I hit it hard on the weekends and on the weekdays I do 10 min session in the shower and another 20 min later on.
Can not wait to se how much power the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] has. I've definitely gained length in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] over the past two years so well see with the slightly bigger [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words].

 

[DLD]

Bigger the tank the bigger the shark will grow I would not suggest a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] but if any man plans on breaking the 8 x 6 barrier he should prepare early and pick up a pump that he will not outgrow after a month. The mid size choices, which will bring you to the 9.5 x 6.5" area, are the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words], the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and the Extreme with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] as the only XL size which can handle just about a foot of length and 8.5 inches of girth. Going too big of a tube can cause a lack of good enough pressure. This can be solved by using the ball fix I put forth a while ago, where a rubber ball is put into the tube first to take up much of the negative space, leaving the penis nice and pumped.

 

[GirthGains]

Bigger the tank the bigger the shark will grow I would not suggest a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] but if any man plans on breaking the 8 x 6 barrier he should prepare early and pick up a pump that he will not outgrow after a month. The mid size choices, which will bring you to the 9.5 x 6.5" area, are the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words], the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and the Extreme with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] as the only XL size which can handle just about a foot of length and 8.5 inches of girth. Going too big of a tube can cause a lack of good enough pressure. This can be solved by using the ball fix I put forth a while ago, where a rubber ball is put into the tube first to take up much of the negative space, leaving the penis nice and pumped.

wow that sounds amazing DLD you just put a rubber ball in and fill with water and pump with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]? I'm 6.5 inch's at the base with a full erection and I can fill the base of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] so that's 2 inch's of expansion feels good to get the ring marks of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] because you know you are getting big expansion .

 

[runningignus]

Intertwine that with a wine vac or air pump like I do to get the max expansion, and you'll be complaining about the rings, not just talking about them. Lol. Got my rabbit wine vac today, so gonna try it when the kiddies leave me be. Whenever that is. That's awesome to hear though. Great work.

 

[DLD]

Intertwine that with a wine vac or air pump like I do to get the max expansion, and you'll be complaining about the rings, not just talking about them. Lol. Got my rabbit wine vac today, so gonna try it when the kiddies leave me be. Whenever that is. That's awesome to hear though. Great work.

Looking forward to your response.

 

[DLD]

Intertwine that with a wine vac or air pump like I do to get the max expansion, and you'll be complaining about the rings, not just talking about them. Lol. Got my rabbit wine vac today, so gonna try it when the kiddies leave me be. Whenever that is. That's awesome to hear though. Great work.

Looking forward to your response.

 

[Zambrodom3]

Looking forward to your response.

Do you recommend doing the rubber ball thingy for better expansion?

 

[Iwannabig1]

I have to say the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] has twice the volume as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words]! need like an x35 or something haha. Im going to need time to figure out how to get it on comfortably the first try. I much prefer the way the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] is setup as far as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] goes. The new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] seems to grip a bit much. Also notice some fluid build up with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]. I do love the new locking valve though. May have to go to the 5x5x3 on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words], going to order a sleeve for my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] also and alternate tools like runinggignus said I think the lenght is suffering in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] but its getting rid of those rings and chaffing!