What's up with my bathmate?

habban

habban

0
Registered
Joined
Oct 16, 2015
Messages
569
Hello!

So today i was going to use the bathmate in the shower as i have been doing for like 20 workouts now in my routine.
I did everything as i usually do but to my concern as i was pushing on the bathmate to get the pump and was ready
to get good suction i didn't get suction at all! Out came water from the top like a cough and the stick you pull sideways
to close and open was sticking out further than usual. The suction was like anti-suction instead, it was like it wanted to pull
itself off of my pubic bone rather than just falling down because of no suction. Kinda similar to when you pull on the top of
the bathmate to release pressure.

It happend mostly when water was inside the bathmate. I tryed sometimes to put it on my stomach and sometimes
same thing happend but sometimes it got good suction on my stomach. But as soon as i worked my penis to the pump state
and pumped on my dick it just fall off and water came out drastically on the front, and what i recognized was that the stick on top
pointed out more. What happend? It didn't let me to do my session today. Is it broken?

I also realized you can spin this "top" part around.

Thanks!
 
>doesn't understand vacuum
😝
> Buys pump out side of brotherhood and now it needs workaround
🍤
 
Last edited:
Like Big said.

You could also try to align the valve as in "pumping" a solid surface, it's a trick that's been around for a longer time. The valve system might be mis-aligned, so that should re-align it.

There are several other possibilities that the suction doesn't hold. There could be a leak in the cylinder or something wrong with the gaiter.

Anyhow, hot water, some soap, rinse it well, the align trick ... I hope you can get it to work! There are ways to fix it though, I'm one of several members here who have modded their Bathmates. I had and still have the Hercules which has been through a lot, but currently I'm using the X30 Extreme, getting a bit of gaiter bite nowadays though.
All the best habban!
 
arkailija;709615 said:
Like Big said.

You could also try to align the valve as in "pumping" a solid surface, it's a trick that's been around for a longer time. The valve system might be mis-aligned, so that should re-align it.

There are several other possibilities that the suction doesn't hold. There could be a leak in the cylinder or something wrong with the gaiter.

Anyhow, hot water, some soap, rinse it well, the align trick ... I hope you can get it to work! There are ways to fix it though, I'm one of several members here who have modded their Bathmates. I had and still have the Hercules which has been through a lot, but currently I'm using the X30 Extreme, getting a bit of gaiter bite nowadays though.
All the best habban!
Click to expand...

Very great information! I will clean my bathmate and try the trick!
I will come back to you on this thread if i still dont get it to work.

Thank you very much!
 
First try to take the pump and place it on a flat surface and push down with force, this will help dislodge anything that may be interrupting the vacuum. I would also suggest that you remove the valve and clean it at least once every 2 weeks. This video below will explain how to clean. Always be sure pubic hair is trimmed to 1/4" or less. Use a smear of Vaseline around the bottom lip.

<iframe width="560" height="315" src="https://www.youtube.com/embed/LG4lZdrAGzw" frameborder="0" allowfullscreen></iframe>
 
Big Schwanz Acht;709663 said:
or ditch the valve-assembly altogether and mod it w/the VV
Click to expand...

Superb modification. Easier to clean as well with the top missing.
 
I cleaned the bathmate, put the valve apart and cleaned that too, pumped my bathmate against a flat surface and voila, the bathmate worked for the session. Expect it to work next session aswell ;)
Thanks guys. :)
 
I'm sorry to inform you guys that on my next pumping session here the same proble occured :/
I think it has something to do with the valve and/or the black pin on the top of the valve.

Firstly, the black adjuster to open/shut the bathmate is loose, especially in the middle position. As soon as i pump excessive amount of water fires out very fast from the top and the adjuster pops out. It doesn't fall to the ground ofcourse, but it sticks out more than ususal, like a pinocchio nose.
It shouldn't shoot that much water in my experience. Seems the valve is somehow broken?
 
What a shame to hear! I'd suggest contacting the Bathmate help team; it wouldn't be the first time there's a problem with the valve. That doesn't mean it would be a bad product, but sometimes things need spare parts.
Take good pictures!

I mean, of course you can do what you did the first time, but the unit shouldn't need re-aligning after every session. Considering you just rinse it out and let it dry out before the next session.
 
Lets say i quit the bathmate for a while. I don't know if i feel like going the way to buy spare parts or a new bathmate for now.

What would be considered a good manual girth workout that can compare with the 5x5x3 bathmate+ssj workout?
In my current routine i just used the bathmate for 5minutes as a warm down actually. Guess i just need something to replace it for now.
 
habban;710316 said:
I'm sorry to inform you guys that on my next pumping session here the same proble occured :/
I think it has something to do with the valve and/or the black pin on the top of the valve.

Firstly, the black adjuster to open/shut the bathmate is loose, especially in the middle position. As soon as i pump excessive amount of water fires out very fast from the top and the adjuster pops out. It doesn't fall to the ground ofcourse, but it sticks out more than ususal, like a pinocchio nose.
It shouldn't shoot that much water in my experience. Seems the valve is somehow broken?
Click to expand...

You are completely covered if you bought your BathMate here, we will send you the replacement parts free. Simply send an email to support@mattersofsize.com and give your order number/or name and they will get you are new valve. We will never leave you with a broken piece of equipment here, we cover you completely.
 
doublelongdaddy;710363 said:
You are completely covered if you bought your BathMate here, we will send you the replacement parts free. Simply send an email to support@mattersofsize.com and give your order number/or name and they will get you are new valve. We will never leave you with a broken piece of equipment here, we cover you completely.
Click to expand...

Yeah, unfortunately i bought mine here where i live. I'm sorry.
I'm starting to think that next time i should buy from you guys. The only problem is that i live very far away from you, and i'm not that confident about how the actual transfer is going to happen!
I certainly don't want the package to look suspicious. Here where i live they always ask: "Who is the provider?" No way i'm gonna say it's from the bathmate company or a local sex store! x)

DLD, what girth routine would you recommend that works as good as the 5x5x3, but manual? :)
 
habban;710410 said:
Yeah, unfortunately i bought mine here where i live. I'm sorry.
I'm starting to think that next time i should buy from you guys. The only problem is that i live very far away from you, and i'm not that confident about how the actual transfer is going to happen!
I certainly don't want the package to look suspicious. Here where i live they always ask: "Who is the provider?" No way i'm gonna say it's from the bathmate company or a local sex store! x)

DLD, what girth routine would you recommend that works as good as the 5x5x3, but manual? :)
Click to expand...

I can only speak for the LM - the delivery was very discreet.

Probably a mixture of SSJs, DLD-Bends, erect Jelqs and a cock-ring would be very effective.
 
Go onto Amazon and order The VacuVin from them...completely discreet and you'll have full deniability, (just say you're an Oenophile)
 
Big Schwanz Acht;710423 said:
Go onto Amazon and order The VacuVin from them...completely discreet and you'll have full deniability, (just say you're an Oenophile)
Click to expand...

Could you link me specifically what i need to buy? The cheapest & safest possible please.

So this is used for opening wine bottles usually? x)
 
It is for sucking out the air from wine bottles, to preserve the taste. Of course Vacu-vin has different tools available as well. But it should be easy to find it from a local super market, alcohol store or then order it online from Amazon.
Depending where you live, the price from your local store compared to online might be about the same, from a local store you'd get it go with you instantly.

On another note about girth work-outs; I am not sure if you've done any clamping, but clamping is serious stuff when it comes to girth! Had a nice session last night utilizing a halved cockcage as cushion and Cableclamp as the clamp.
So, take a look in the clamping section!
 
You must log in or register to reply here.

Similar threads

O
  • Sticky
Equipment modification Modification to Bathmate HydroXtreme 7 with a pressure gauge
2
Replies
21
Views
830
T
trustr1
T
M
Bathmate Discrepancies Q&A's
Replies
4
Views
590
DLD
DLD
DLD
squirt_inducer_man
Experience with Bathmate pumps.
Replies
10
Views
1K
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
B
So I receive my Mityvac
Replies
7
Views
350
H
huge-girth
H
MosMaster
What you think of my routine?
2
Replies
22
Views
2K
DLD
DLD
DLD
Back
Top Bottom