Dashdeming

Well-known member
Gentlemen,
I have been using a blakoe ring, which is known as a ROP (ring of power) here, for almost two years. Here is my story:

I used to be a specialist contractor in the defense industry. In 1999 I was on assignment and was involved in a hostile action in a third world type country. The long and the short of it is that the plane I was riding in had to ditch and I was injured. Don't feel too bad because some good men were killed that day. I get tears in my eyes every time I think about it.

My injuries involved broken ribs, torn pecs, dislocated shoulders, broken wrists, hamburgered breast tissue, hamburgered fat pad area, and the big one, damaged penis and right testicle. My body immediately began going through hormonal changes due to reduced testosterone production. By 2002 I had gained weight, began loosing hair, lost my sex drive and could hardly get an erection. My right testicle shrank to the size of a large peanut. I felt so bad. I could no longer maintain the muscle mass that I had been so used to for years.

I went through several penis repair procedures and I was able to get somewhat of an erection but have never been able to get the head hard again. I am still working on this and looking for a doctor or a method that might help this condition. Anyway, I eventually found Penis Enlargement. Penis Enlargement has done absolute wonders for my penis to not only recover lost size and use but to also get even bigger. I bow to the likes of the greats such as DLD, RedZulu, StillWantMore and I could go on.

Anyway, I ran across Tom Hubbard's web site and decided to try the zinc/copper device on for size. I have to say that I belive the device has helped me. The doctors have been tracking my chemistry since the accident and they noticed a step change in several constituents. I didn't tell them but this coincided with the exact time I began wearin the Blakoe device. I was thrilled to say the least. Testosterone went up, cortisol went down and estrodiol went down as well. I have slowly been able to gain some of my muscle mass back and I have very good erections now. And due to DLD, Red, Still and others I now have a bigger penis to boot.

So what do I have to offer besides a little of my history?? Well, after several weeks of struggling to get the Zinc/Copper device on and off, I decided I really had to develop a modification. And so I did.

I have built a modified Blakoe type device that you can put on and take off in seconds with ease. The device is so comfortable and convenient to use compared to the simple design.

I will build you one for $50. This device is of the highest quality and you can easily custom fit per my enclosed instructions. What must I do? Simply send me a PM or send me an email to dashring@yahoo.com and I will reply with instructions.


Email me at dashring@yahoo.com

Or PM me on [words=http://www.mattersofsize.com/join-now.html]MOS[/words]

Good luck on your Penis Enlargement adventure guys!!
 
I'd also like to see a pic of this "new, convenient" ROP. Not that I don't believe you, but I'd still like to have picture proof to judge if it's worth a purchase, or if I should keep the same ROP I currently have.
 
oopapercutoo said:
I'd also like to see a pic of this "new, convenient" ROP. Not that I don't believe you, but I'd still like to have picture proof to judge if it's worth a purchase, or if I should keep the same ROP I currently have.

seconded :)
 
Here is a picture of the new Dash Ring guys. This thing is way convenient to use with the quick disconnect feature!
 
Very good Dash, nice to hear that you've got over that tragedy in the past and got yourself up again.
I'm also going to stick this on behalf of Ancient China.
 
Thanks Red, It is really good to have support from guys like you. It hasn't been easy but it sure feels good to be able to make gains. I can't believe how much raising testosterone helps with the body leaning and muscle building. It has been really hard on me to gain weight and loose definition. I am feeling almost like a youngster again!!
 
I like Dashring the best imo.

What do I get if I order from you Dashdeming? Supra includes spare parts, so basically I get 2 ROP's from him.

Also, where is the best place to put this ring? Around your nuts or the base of the penis?
 
You won't need any spare hard parts but I do include extra tubing and also you get a disconnect device that makes using the sucker way more convenient. Because of the quick disconnect you will use the device more. I recommend placing it around your whole package and I don't think you get very much out of putting it around your pwnis only.

Good names guys. I wonder which one will stick?
 
Sorry fore your accident.

You write you lost hair and get fat.

After you start with the ROP,did you get your hair back and lost fat?

Any Buddy who have experiences like that?
 
Um, maybe I am missing something here as nobody has mentioned this, but didn't Supra come up with this EXACT same idea about 8 months ago?
 
I don't really see how this can be all THAT much more convenient to use than the standard ROP. It only takes me about 5 seconds to put the ROP on and the same amount of time to take it off. And the shape of the Dashring doesn't look like it would be very comfortable, all triangular and stuff. But whatever.
 
Gandolf said:
Um, maybe I am missing something here as nobody has mentioned this, but didn't Supra come up with this EXACT same idea about 8 months ago?


Well after reading over this once I was kinda at a loss for words but didnt really care. But then reading it again I have to call some things out. First I got bashed to no end by people and even by dash about the ROP's, then I leave for three weeks and come back and there is a new "Dash ROP". I really am at a loss for words, its the exact thing that I made, and the "quick dissconect is really no biggie, the ROP come apart just as fast by pulling the tube off the metal. Besides this "quick dissconect" as its called is not a big deal to make people buy a whole new ROP or sell them instructions for the same thing with a minute diffence. I dont even know why you need a quick dissconnect. You never really have to take the thing off minus some cleaning.

But I would hate to see people spending there money for the same thing thats already out there and can be made for free by going here
http://tomsnewsite.Thund3rs Pl@ce.com/sperm.htm or if they already bought one from me spending it again, or by reading the directions that I posted, God knows I got bashed to no end by losts of people about this and now one of the people that bashed me is copying it and doing it himself. I never have seen dash made one post saying that he was worn the ROP or Blakoe ring or whever for 2 years, and then I leave for three weeks, and bam comes the Caddy Shack of New ROP's. Im kinda apalled at the whole stiuation. Not that I have competition, im kinda outa the game, and moved on but I think that this is kinda a bad situation to begin with. With trying to copy what I already did and then make up a whole story. I really dont have anything else to say. Im not going to get into a price war on who can make the cheapest ROP and trun into some used car sales man like this has tunred into. People were all bashing me and I stuck it out, and now they're basically admitting that I was right the whole time because they're doing the same thing. If people still want me to make there rings for them Ill do it for sure. I know that what materials I use are better than anything else out there but as far as this "war of the rings" kinda redundant and silly and a complete copy and on the same board which really makes it even worse. Thats all I have to say man
 
Last edited:
I don't want to call anyone out, but Dasheming wasn't really a supporter of the ROP, and yea, I've never had a problem getting it on or off. I don't like to start shit on the internet, and I tend to try to be friends with everyone, but selling this quick release idea without telling people out to make it for themselves is kind of a sham. I mean Supra explained everything about how to create an ROP, but there's no instructions on how to make this quick-release ROP? Kinda sounds like you just want a quick profit *shrug*. I kinda like this community because for the most part it gives you the option of working for it, or taking the easy way out if you have money, and buying it. I know I could probably sell my lucid dreaming technique, and if anyone would like to pay me for it, they can, and I'll teach them, hell, for the right price, I'll teach them in person, but rather, I outlined it in 2 threads, and I tracked my progress and let everyone know what they could expect. I think you (Dasheming) should tell people how to make your detachable ROP as an alternative to selling it yourself. Just a suggestion.
 
Supra said:
Well after reading over this once I was kinda at a loss for words but didnt really care. But then reading it again I have to call some things out. First I got bashed to no end by people and even by dash about the ROP's, then I leave for three weeks and come back and there is a new "Dash ROP". I really am at a loss for words, its the exact thing that I made, and the "quick dissconect is really no biggie, the ROP come apart just as fast by pulling the tube off the metal. Besides this "quick dissconect" as its called is not a big deal to make people buy a whole new ROP or sell them instructions for the same thing with a minute diffence. I dont even know why you need a quick dissconnect. You never really have to take the thing off minus some cleaning.

But I would hate to see people spending there money for the same thing thats already out there and can be made for free by going here
http://tomsnewsite.Thund3rs Pl@ce.com/sperm.htm or if they already bought one from me spending it again, or by reading the directions that I posted, God knows I got bashed to no end by losts of people about this and now one of the people that bashed me is copying it and doing it himself. I never have seen dash made one post saying that he was worn the ROP or Blakoe ring or whever for 2 years, and then I leave for three weeks, and bam comes the Caddy Shack of New ROP's. Im kinda apalled at the whole stiuation. Not that I have competition, im kinda outa the game, and moved on but I think that this is kinda a bad situation to begin with. With trying to copy what I already did and then make up a whole story. I really dont have anything else to say. Im not going to get into a price war on who can make the cheapest ROP and trun into some used car sales man like this has tunred into. People were all bashing me and I stuck it out, and now they're basically admitting that I was right the whole time because they're doing the same thing. If people still want me to make there rings for them Ill do it for sure. I know that what materials I use are better than anything else out there but as far as this "war of the rings" kinda redundant and silly and a complete copy and on the same board which really makes it even worse. Thats all I have to say man

Supra, I never bashed the ROP but I did have problems with you along with others and this led to you being demoded by admin. The fact is that I, along with many others, learned about the Blakoe Ring years before you came along and claimed the exact same idea with a new name. You did this for profit so get off of your high horse marine. I am offering a Blakoe Ring with a disconnect that I have developed. Yes, the disconnect is unique and not really something the average guy could make. I am working on one though that might use common items off the shelf and this one could be assembled with instructions. Also, no instructions are for sale and never were. If you buy one it comes with instructions. If someone wants to build one then they should go to Tom Hubbard's site and copy the instructions there as you did. The shape of the device that I build is completely dependent upon how long the user makes each segment and can be square rectangular and I have even shaped the zinc and copper to make a round device. I did this over two years ago and that one was VERY comfortable. Additionally, I will make a ring for those guys that don't want a quick disconnect. It's really not rocket science and it was not your or my idea. It was well before us. I do have a unique idea and it is the quick disconnect. You are missing the point as to why it is better. It is better because it is more secure. You see I actually put a shapped finish on the ends of the copper and zinc so that the tubing is much more secure. Many Blakoe Ring users over the years have complained about the device coming apart during use. With the secure ends and a disconnect, it will never come apart. This is unique and not just a copy of another man's idea. I encourage everyone to go out and build their own Blakoe Ring as it is not rocket science. For those that want to buy one or don't have access to the supplies then I offer a unique alternative and can also deliver the exact Blakoe Ring as described on Hubbard's site. It would actually prefer that you build the devices if you are available because my time is actually worth more. I will do it in the name of Penis Enlargement and I will do it better as well. I simply do not need the money but I will do it as a hobby along with several of my inventions. Hey, I don't appreciate you inferring that I made up a story to sell a freaking ring. That was very insensitive and I would think you, of all people, would be better than that. In closing, you will be in my prayers for a safe tour for you in Afgan. I know you will come back a better and much more mature person. God Speed.
 
Last edited:
Dashdeming said:
It would actually prefer that you build the devices if you are available because my time is actually worth more. I will do it in the name of Penis Enlargement and I will do it better as well. I simply do not need the money but I will do it as a hobby along with several of my inventions.
Hey come on man, this really gets to me. If you didn't wish to make these rings and it was only for the common good you wouldn't charge the exorbitant price of 50 bucks. We didn't let Supra off the hook for making this exact claim and I don't think you should make it either. If you weren't profitting, you wouldn't be selling these things. Period. Selling stuff here is OK, but this kind of marketing tactic is really a bunch of shit.
 
Dashdeming said:
Supra, I never bashed the ROP but I did have problems with you along with others and this led to you being demoded by admin. The fact is that I, along with many others, learned about the Blakoe Ring years before you came along and claimed the exact same idea with a new name. You did this for profit so get off of your high horse marine. I am offering a Blakoe Ring with a disconnect that I have developed. Yes, the disconnect is unique and not really something the average guy could make. I am working on one though that might use common items off the shelf and this one could be assembled with instructions. Also, no instructions are for sale and never were. If you buy one it comes with instructions. If someone wants to build one then they should go to Tom Hubbard's site and copy the instructions there as you did. The shape of the device that I build is completely dependent upon how long the user makes each segment and can be square rectangular and I have even shaped the zinc and copper to make a round device. I did this over two years ago and that one was VERY comfortable. Additionally, I will make a ring for those guys that don't want a quick disconnect. It's really not rocket science and it was not your or my idea. It was well before us. I do have a unique idea and it is the quick disconnect. You are missing the point as to why it is better. It is better because it is more secure. You see I actually put a shapped finish on the ends of the copper and zinc so that the tubing is much more secure. Many Blakoe Ring users over the years have complained about the device coming apart during use. With the secure ends and a disconnect, it will never come apart. This is unique and not just a copy of another man's idea. I encourage everyone to go out and build their own Blakoe Ring as it is not rocket science. For those that want to buy one or don't have access to the supplies then I offer a unique alternative and can also deliver the exact Blakoe Ring as described on Hubbard's site. It would actually prefer that you build the devices if you are available because my time is actually worth more. I will do it in the name of Penis Enlargement and I will do it better as well. I simply do not need the money but I will do it as a hobby along with several of my inventions. Hey, I don't appreciate you inferring that I made up a story to sell a freaking ring. That was very insensitive and I would think you, of all people, would be better than that. In closing, you will be in my prayers for a safe tour for you in Afgan. I know you will come back a better and much more mature person. God Speed.

I just think that selling them without telling people how to make them for free is totally wrong, and im not being immature and on a high horse, everyone will agree with me on that, if your gonna do something, help people do it for free, then if they still want you to make them one, thats fine, When I first posted about the ROP I never had intetions on selling it, I did not even think it would be allowed, but them after so many saying they wanted them, I asked DLD and he said it was ok. Then you come out with this and right of the bad start charging people for it, that is wrong. Even DLD Myself and Bib and everyone else, gives out how to make there goods for free, you are not, Dont try to make me look like the bad guy on this one buy stuping to calling names, im just pointing out the obvious as others have already said.
 
Gandolf said:
Hey come on man, this really gets to me. If you didn't wish to make these rings and it was only for the common good you wouldn't charge the exorbitant price of 50 bucks. We didn't let Supra off the hook for making this exact claim and I don't think you should make it either. If you weren't profitting, you wouldn't be selling these things. Period. Selling stuff here is OK, but this kind of marketing tactic is really a bunch of shit.

Where did you ever get the idea that there is no profit at 50 bucks? Hell yes there is a profit and that is why I charge 50 bucks. I didn't get to be worth in excess of $12 million buy doing things for free! No joke, what I said was that my time is worth more and I truly would like to see someone else build the devices and of course make a profit (which is not a bad thing). I have ideas and I apply some of them. These things won't make you rich but making something a little better does give me satisfaction. I would REALLY like to see someone like Levista take on the task!! That guys is really dedicated to the whole ring thing as evidenced by his most awesome thread.
 
Supra said:
Well after reading over this once I was kinda at a loss for words but didnt really care. But then reading it again I have to call some things out. First I got bashed to no end by people and even by dash about the ROP's, then I leave for three weeks and come back and there is a new "Dash ROP". I really am at a loss for words, its the exact thing that I made, and the "quick dissconect is really no biggie, the ROP come apart just as fast by pulling the tube off the metal. Besides this "quick dissconect" as its called is not a big deal to make people buy a whole new ROP or sell them instructions for the same thing with a minute diffence. I dont even know why you need a quick dissconnect. You never really have to take the thing off minus some cleaning.

But I would hate to see people spending there money for the same thing thats already out there and can be made for free by going here
http://tomsnewsite.Thund3rs Pl@ce.com/sperm.htm or if they already bought one from me spending it again, or by reading the directions that I posted, God knows I got bashed to no end by losts of people about this and now one of the people that bashed me is copying it and doing it himself. I never have seen dash made one post saying that he was worn the ROP or Blakoe ring or whever for 2 years, and then I leave for three weeks, and bam comes the Caddy Shack of New ROP's. Im kinda apalled at the whole stiuation. Not that I have competition, im kinda outa the game, and moved on but I think that this is kinda a bad situation to begin with. With trying to copy what I already did and then make up a whole story. I really dont have anything else to say. Im not going to get into a price war on who can make the cheapest ROP and trun into some used car sales man like this has tunred into. People were all bashing me and I stuck it out, and now they're basically admitting that I was right the whole time because they're doing the same thing. If people still want me to make there rings for them Ill do it for sure. I know that what materials I use are better than anything else out there but as far as this "war of the rings" kinda redundant and silly and a complete copy and on the same board which really makes it even worse. Thats all I have to say man

I certainly don't recall ever bashing you about the ROP. It would be very good for you to now post the link to the the thread where I did this, I mean to remain credible this would be a perfect opportunity for you to back up your comment.

I have been using a Blakoe Ring for over two years now and I have nothing but positive comments. I certainly wouldn't rate the ring above Penis Enlargement exercises but I think it does help a few guys are are suffering from lowered testosterone levels. By far though, Penis Enlargement exercises are where where it is at for both penile health and a man's confidence.
 
Hey Supra,

Just look at it as a big compliment when people are copying the ROP idea. It would even be a bigger compliment when they had mentioned the source of the idea.
I always quoted your name when using the zinc / copper formula.
BTW; you mentioned the Blakoe Ring as a source of the idea.

Peace,
Yves
 
Don't you mean copying the Blakoe Ring idea from Tom Hubbard? Penis Enlargement vets will tell you that this idea was around way before Supra and many people have been using it, including me. Supra has credit for copying it and changing the name and promoting it here on [words=http://www.mattersofsize.com/join-now.html]MOS[/words]. I appluade him for that and have never had a bone to pick with him about this. Research a little on other Penis Enlargement websites and you will find the true source. I actually first heard of the device from Red on the PenisPride forum way before [words=http://www.mattersofsize.com/join-now.html]MOS[/words] existed. Penis Enlargement has been around a little longer than you may realize Yves.
 
Dashdeming said:
Don't you mean copying the Blakoe Ring idea from Tom Hubbard? Penis Enlargement vets will tell you that this idea was around way before Supra and many people have been using it, including me. Supra has credit for copying it and changing the name and promoting it here on [words=http://www.mattersofsize.com/join-now.html]MOS[/words]. I appluade him for that and have never had a bone to pick with him about this. Research a little on other Penis Enlargement websites and you will find the true source. I actually first heard of the device from Red on the PenisPride forum way before [words=http://www.mattersofsize.com/join-now.html]MOS[/words] existed. Penis Enlargement has been around a little longer than you may realize Yves.

Well thats true, I really thing think that you should at least tell people how to make it and make it on there own without charging them. That is the right thing to do man, thats my only beef.
 
Here we go again, more drama.
All I have to say is this, the Blakoe Ring has been out for ages way before any Dash or ROP ring came about and that it has been the main source for both your ideas.
No one is copying anyone and even if they do at times, in Penis Enlargement it cant be avoided cos theres always someone saying it was his or its his, who cares.
At the end of the day Supra you have said that Penis Enlargement for you has ended and that you wouldnt have the time to really make the ROPs as much so Dash has kinda in a way took over, and in the same thread in the deep thoughts section you also wished Dash well on this venture so why this has all been dragged up in here yet again and not a PM is typical you, but doesnt surprise me.I'm not arsed what Ring is sold, but I dont like this Drama that springs up here everytime you come here, no offense you've had to clear some things up but couldnt you have PMed Dash and not started more unrest, especially between the mods yet again, theres already a line between the mods as it is.

Anyways, thats all.
 
REDZULU2003 said:
Here we go again, more drama.
All I have to say is this, the Blakoe Ring has been out for ages way before any Dash or ROP ring came about and that it has been the main source for both your ideas.
No one is copying anyone and even if they do at times, in Penis Enlargement it cant be avoided cos theres always someone saying it was his or its his, who cares.
At the end of the day Supra you have said that Penis Enlargement for you has ended and that you wouldnt have the time to really make the ROPs as much so Dash has kinda in a way took over, and in the same thread in the deep thoughts section you also wished Dash well on this venture so why this has all been dragged up in here yet again and not a PM is typical you, but doesnt surprise me.I'm not arsed what Ring is sold, but I dont like this Drama that springs up here everytime you come here, no offense you've had to clear some things up but couldnt you have PMed Dash and not started more unrest, especially between the mods yet again, theres already a line between the mods as it is.

Anyways, thats all.

Dramas over man, me and Das are fine now, was not really that worried, just wondering back what some of the reasons for the desicsions that were made, and why not tell people how to do it for free as I did, its cool though, sorry to cause some drama.
 
Well the construction of the ring is the same and has absolutely no difference as the original that is shown on Tom Hubbard's site. The only thing that I have added is the quick disconnect and I machined that out of SST in my shop and this is not something most can do unless they have a fine CNC lathe. I am working on one though that uses a key chain disconnect and anyone can make that one. I will have info as soon as I get the specs.
 
Everyone ripped everyone off. Big deal.


This is only a Penis Enlargement online internet message forum. There are many Penis Enlargementrs who gain great gains from Penis Enlargement and don't even post on any Penis Enlargement forums. There are people who Penis Enlargement but only lurk Penis Enlargement forums and some of them gain more than the vets at Penis Enlargement forums.



I am basically trying to say that this is only a Penis Enlargement forum and that Dash is ripping everyone off.
 
Last edited:
Actually no, I have sold 1 ring and I have donated $50 to the forum this month alone. You must be thinking of the other guy that actually pumped and sold the ROP here for months?? Do yourself a favor and read back a bit. You can use the search function and search "ROP" and get the real story if you take the time to look.
 
Last edited:
Dude, the instructions are the same as was posted her buy another member. Supra deleted that thread and then made his own thread with the Blakoe ring instructions that he got from Tom Hubbard. I will say it again for you, it is the same instructions. I have only added a quick disconnect.

I will not be delivering rings to anyone as soon as you get permission from DLD and start delivering. I am impressed that you will actually deliver a $10 quality ring to the members. I do hope that you help financially support the forum and also do not prove to be full of shit. You have a few folks here behind you including one mod. Best not make you and them look foolish. Either way, I am for anything that is good for the forum and the members. Go for it bro!
 
Im sorry for coming hard on you.


It seems like if everyone wants to buy rings from me. I hope DLD gies me the permission to start selling them.


I need to get the materials in the mean time.
 
Well yesterday I got my testosterone checked. Should get the results in a week or so. Before wearing the ROP (which I started wearing in April) my test was 871. Top end of the chart is 825 I believe. But I figure more will still be better. Im excited to find out. I will post when I get the results.
 
General chit-chat
Help Users
  • MoS Notifier MoS Notifier:
    jayzdaro is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    trade is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    solomanp is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    cavv is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    STJ69 is our newest member. Welcome!
  • S @ STJ69:
    hEY AL
    Quote
  • S @ STJ69:
    chaty room for sure
    Quote
  • Quote
  • MoS Notifier MoS Notifier:
    barxwasu is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Rodun is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    alexstevens is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Hardup4luck is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    wolfywoo is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Dan6average is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    here2grow is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    kauzchag is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    ThickForeverHard is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    saynow is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Zebigger is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    madmck1 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Marlon is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    wolf211330 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Plancket is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    wasynopa is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Tickman10 is our newest member. Welcome!
      MoS Notifier MoS Notifier: Tickman10 is our newest member. Welcome!
      Back
      Top