REDZULU2003
Well-known member
Hell Yeah
NEW - SiliStretcher All Day Stealth Penis Vacuum Stretcher and Hanger
Hell Yeah
I have to agree that the Silistretcher is really comfortable and you almost forget its even on except for the nice stretch you feel.
I did notice one thing over the weekend I didn’t notice much before, probably because I usually wear an undershirt and I place the Silistretcher belt over the shirt.
The Velcro on the belt kept scratching on my waist enough that I noticed it when I would walk or adjust the belt.
The belt is about 3 inches wide and the Velcro goes the full width, so when the belt stretches out some the Velcro overlaps the belt and catches the skin a bit.
Any thoughts on tapering down the end of the belt to like 2 or 2.5 inches wide for like the last 3 or 4 inches and put velcro on the full length of the tapered end.
This way if the belt stretches then the velcro will not overlap and you will forget the Silistretcher is even there.
I did notice one thing over the weekend I didn’t notice much before, probably because I usually wear an undershirt and I place the Silistretcher belt over the shirt.
The Velcro on the belt kept scratching on my waist enough that I noticed it when I would walk or adjust the belt.
The belt is about 3 inches wide and the Velcro goes the full width, so when the belt stretches out some the Velcro overlaps the belt and catches the skin a bit.
Any thoughts on tapering down the end of the belt to like 2 or 2.5 inches wide for like the last 3 or 4 inches and put velcro on the full length of the tapered end.
This way if the belt stretches then the velcro will not overlap and you will forget the Silistretcher is even there.
You can cut it down with scissors or use an ace bandage/gauze or theraband underneath for to accommodate your needs. Everyone wears it differently to meet their needs.
Thanks for the tip!
We have two variations of the SiliPads coming. One is a pre-contoured silicone insert that fills the voids and elimintes fluid retention without using the SiliCap.
The other is a Gel Memory insert that countours to the shape of your glans and is to be used with the SiliCap.
These are not a necessity but can help improve comfort and reduce fluid retention from excessive use or weights.
The other is a Gel Memory insert that countours to the shape of your glans and is to be used with the SiliCap.
These are not a necessity but can help improve comfort and reduce fluid retention from excessive use or weights.
When are these things available and how much is the price? Are these modifications exchangeable?
@Lightning
Good news! I received the SiliScale...I put in the battery and held the on button. Nothing is happening. I tried to hang a weight to see if the weight would activate the scale. Still nothing. I see a little light flashing yet nothing is happening.
I wonder if changing the battery may help
Same here...@Lightning
Good news! I received the SiliScale...I put in the battery and held the on button. Nothing is happening. I tried to hang a weight to see if the weight would activate the scale. Still nothing. I see a little light flashing yet nothing is happening.
I was having a hard time hanging 5 lbs with the Silistretcher because part of the sleeve would come out, creating an inward bubble. I PM'd Lighting and he gave me the following advice that worked great:
Try retracting the piston 3 full turns then put your penis inside the SiliStretcher and SiliSleev and then do another full turn.
Try retracting the piston 3 full turns then put your penis inside the SiliStretcher and SiliSleev and then do another full turn.
Yep that’s exactly how it goes. I can imagine were frustrated before so I’m glad that this is been resolved.
View attachment 1821418finally got to start using SiliStretcher today feels good no pain so far only prob was after the first 1 hr I went to switch to other side and saw this looks like starting to rip
I’m so happy that you’re getting along well with the SiliStretcher and I apologize for the sleeve, we try our best with quality control but every once in a while something slips through. Simply send a message to the @Lightning requesting another sleeve. In the meantime you can take a hot knife or a hot scissors and cut right to the point of the rip and you’ll be able to use the sleeve again without it ripping until the new one arrives. We stand by our products 100% say never worry. ?
That is a moulding point that got caught too deep while demoulding. That should be fine until we get you a new one. You should have other SiliSleevs as well to hold you over.
Shoot me a PM with your order number or email and we will ship a replacement in the morning.
Haursen
The Godly PE Journeyman
@Lightning
Good news! I received the SiliScale...I put in the battery and held the on button. Nothing is happening. I tried to hang a weight to see if the weight would activate the scale. Still nothing. I see a little light flashing yet nothing is happening.
Is any word about why the SiliScales are not working @Lightning ? See above quotes...
SiliScale & Battery Package
Rated to hang weights and tension up to 55lbs. (25Kg)
View attachment 1821424
View attachment 1821425
View attachment 1821427
Slide back cover off for battery
View attachment 1821428
Insert CR2032 battery with Plus (+) face up
View attachment 1821429
Screen automatically comes on
View attachment 1821430
Hold button down for 2 seconds to power off.
Then push (not hold) to power on.
As screen is blinking, quickly push power button to cycle between pounds and kilograms.
After selected, SiliScale will Tare to Zero.
Apply tension or weights to get measurement.
To reset to Zero, push power button once.
Whenever you push power button, blue backlight will come on.
To power off, hold power button for 2 seconds.
Pictures below are demonstrated with the 1.1" SiliStretcher.
View attachment 1821431
Attach titanium ring to Silistretcher.
The titanium ring is really strong, you may want a flathead screw-driver to spread it.
View attachment 1821432
View attachment 1821433
Rated to hang weights and tension up to 55lbs. (25Kg)
View attachment 1821424
View attachment 1821425
View attachment 1821427
Slide back cover off for battery
View attachment 1821428
Insert CR2032 battery with Plus (+) face up
View attachment 1821429
Screen automatically comes on
View attachment 1821430
Hold button down for 2 seconds to power off.
Then push (not hold) to power on.
As screen is blinking, quickly push power button to cycle between pounds and kilograms.
After selected, SiliScale will Tare to Zero.
Apply tension or weights to get measurement.
To reset to Zero, push power button once.
Whenever you push power button, blue backlight will come on.
To power off, hold power button for 2 seconds.
Pictures below are demonstrated with the 1.1" SiliStretcher.
View attachment 1821431
Attach titanium ring to Silistretcher.
The titanium ring is really strong, you may want a flathead screw-driver to spread it.
View attachment 1821432
View attachment 1821433
Last edited:
We updated the SiliStretcher in the shop so the 2.5lb weights are now a free selectable option and no weights is the default option.
We did this to help reduce shipping costs for international orders who don't want incure extra shipping expenses due to extra weight.
So if you are about to purchase the SiliStretcher and want the Free 2.5lbs weights, make sure you select that option from the drop down menu. Otherwise, your package will arrive with no weights.
We did this to help reduce shipping costs for international orders who don't want incure extra shipping expenses due to extra weight.
So if you are about to purchase the SiliStretcher and want the Free 2.5lbs weights, make sure you select that option from the drop down menu. Otherwise, your package will arrive with no weights.
Last edited:
Haursen
The Godly PE Journeyman
I did exactly as noted above...screen did not automatically come on. I think either the battery is dead or I have a bum unit.
Wouldn't be the first time the battery is dead. Those CR2032 type are easily available though, I keep them at hand as I have few things that use those batteries. (Such as my scale, electronic tuner, few watches etc..)I did exactly as noted above...screen did not automatically come on. I think either the battery is dead or I have a bum unit.
I hope you can get it working!
Try changing the battery. Not sure why they would be dead. You can get the CR2032 battery at any store, pharmacy, supermarket, etc. that sells batteries for $1-2 here in the US. It's a standard watch battery.
We are now shipping them with the battery installed and unit tested.
We are now shipping them with the battery installed and unit tested.
Last edited:
Boom that did it for me. 5lbs no problem anymore!!!!
I recal that you have to send it back and cover the shipping costs, they will attach the ring on your SiliStretcher and send it back.
@Lightning , correct me if i’m wrong.
Yea I live in Europe so I can’t miss my SiliStretcher for two weeks ?
I have to hang every single day, so that’s a problem.
I’d love to know how one could attach it by himself.... @Lightning @DLD
For the few first run SiliStretcher owners that are participating in this thread and want the new version, we will send you a complimentary upgraded SiliStretcher. We will also send the SiliScale (if you do not have yet) and our first run SiliPads. Just cover shipping.
PM me your email and we will invoice you for shipping.
PM me your email and we will invoice you for shipping.
Last edited:
This is awesome.
There is no other customer service out there for PE like MOS.
Every question I have asked regarding the Silistretcher has been answered and all the brothers on the forum providing feedback is great. (clap)
DiDo. . (clap)
Yes Lightning has provided some of the best customer service ever. The silistretcher and the Mitty Vac are superb build quality - extremely comfortable.
I stopped using my bathmate and phallosan. The Mitty Vac, Sillistretcher, and Lengthmaster are the greatest PE tools ever - made by the pioneers here who have been in the game for a long time. The support is incredible and lifetime warranty on the products... no need to say anymore...
Thank you Lightning and DLD for your support and guidance.
I stopped using my bathmate and phallosan. The Mitty Vac, Sillistretcher, and Lengthmaster are the greatest PE tools ever - made by the pioneers here who have been in the game for a long time. The support is incredible and lifetime warranty on the products... no need to say anymore...
Thank you Lightning and DLD for your support and guidance.
You aren't lying. I hit it for two days last week and had to take a bunch of days off. Noticeably more plump after a little stretching and the mityvac. Skin was also peeling(I guess it was peeling) Used silisleeve as much as possible during the day. I am trying to get myself into a routine. privacy is limited half the time.
Wore SiliStretcher to work for second day with no problems or anyone noticing
For those that want to hang heavier weight with the current standard SiliSleevs and SiliStretcher until the SiliSleev Duros arrive, we've edited this thread below...
StonerWithABoner
Active member
The suggestion i found for the phallosan when i first got that years ago was to switch sides every 2 days. But what I came to realize is that the better my junk feels, the better stretch it's going to get, so every single time I put it on, I strap it whichever direction feels better at that moment. I would personally apply that same approach to the silistretcher
Personally I've switched from my right hip to left hip couple of times. Sometimes I seem to get better stretch on my right hip and I'll be able to wear it easily for more than hour.
Bathroom breaks aside, I usually get several hours of stretch on either side. It's also a personal preference thing, try it out differently.
You might find a best way for yourself like StonerWithABoner did!
Bathroom breaks aside, I usually get several hours of stretch on either side. It's also a personal preference thing, try it out differently.
You might find a best way for yourself like StonerWithABoner did!REDZULU2003
Well-known member
You can, its not a must, more a personal preference. I would do it myself, just to change it up.
Yeah I agree as well that it is a personal preference. I go about an hour or so and then I like to check things out, but glad to see some are taking it further with time which I may also do in the future.
I just finished with a 2 hrs on each side..The first two hrs was good. My second 2 hrs I had a bit of Puffiness and Swelling..I think I used too much pressure for just stretching for the second 2 hrs..I am Hanging also 2/30 min sets of 10 lbs in the morning and the same in the evening with the SS and sometimes if I turn it in too much I get the same effect..Have to remember 1 full turn is suffice for 10 lbs, I might go 1 and a half turns or a tad more is where I get the swelling,especially underneath the glans and the urethra opening. I have been using Tape for the Glans for the past week and it works dam good. Nexcare absolute waterproof Ruban tape on the whole glans area the same length as what the cap covers instead of the glans cap..The glans cap on me seems to pull off a bit when I hang and it leaves a air pocket at the tip which causes urethra swelling. For my evening hang I will put the Cap on and secure it all around at the bottom tape to keep it from slipping off and see if this works. "Anyone else having the Glans Cap "Slip Off" a bit when hanging". First, I will try some MosGrip on the Glans without the tape and see it keeps the Cap from pulling up 1/4 inch when hanging..That Grip stuff really keeps the Silisleeve nice and secure for hanging 10 lbs. I was getting some slippage before at 9/10 lbs without the Grip and now that I use it on the shaft, it's Snug as a Bug in a Rug. Dam good stuff....I think I just never put enough on the glans area to keep the cap from moving, just concentrating it on the shaft. Will test it out tonight and report back !
That’s great to hear you were able to go that long with no issues.
How many turns of the knob do you use?
I’ve been using about a half turn lately with no problems going for about an hour or so.
To help keep track of the turns, get a permanent marker and mark a line on one of the four wings on the SiliStretcher knob.
Before I enter the SiliStretcher I turn it so its just a little under half way turned up the glass(that my gland can just about fully enter the SiliStretcher) before I roll the silisleeve down my shaft and then turn the device 2 knobs to lock it in. I found this works best for me and I have just done 4 1/2hrs straight no slippage.
Marking it with a permanent marker really does help keep track, so you do not perform too many turns.
This is really good to read everyones posts with all the positive feedback. It was a bit rough in the beginning getting the proper formula together due to there being many different penis shapes and sizes but I think we got this down to a science now.
You guys have been great and I appreciate all your feedback. This is why we want to keep your Silistretchers updated with the latest mods.
Any suggestions you have to help improve the SiliStretcher, please share with me in here. This is how we continue making the best get better by listening to you.
You guys have been great and I appreciate all your feedback. This is why we want to keep your Silistretchers updated with the latest mods.
Any suggestions you have to help improve the SiliStretcher, please share with me in here. This is how we continue making the best get better by listening to you.