NEW - SiliStretcher All Day Stealth Penis Vacuum Stretcher and Hanger
Haursen
The Godly PE Journeyman
I will definitely be getting some of these silipads.
When will they be available for ordering?
Here’s my update on fluid retention at the tip of the glans.
So of course you begin to notice the details the more you try something.
What I noticed yesterday after removing the the silistretcher with an hour use at half a turn is that when I have the silistretcher to the right on the belt the right side of glans tip has more fluid when I remove the silistretcher and when to the left the left tip has more fluid.
The pressure was somehow being concentrated in this area and I think it is why I had fluid build up.
Another thing I noticed is that the cup would be angled in a bit, instead of straight, where the glans meets the silistretcher cup/ piston, when applied to belt, so I think this is how the pressure was being concentrated on the tip of my glans.
I thought how do I even out the pressure on the glans and prevent the angling of the silistretcher cup when wearing it?
This may have already been mentioned not sure.
I waited about an hour, so that all the fluid was gone from before, even though it usually goes away after about 5 minutes with light massage.
What I did was put the silicap on by rolling the edges so that it was like a condom and rolled it onto the glans, then I twisted the piston all the way in on the silistretcher cup and let it down 1 full turn, so I can get pressure when I apply the silistretcher.
Now I know the recommended position is for the glans not to be in the cup that far in, but I had to try this to see if it would help with fluid.
So I put the glans in pretty much inside the cup with silicap on, pulled the sleeve over, and applied half a turn. The grip on the shaft felt better than before also, mind you I was using the short sleeves.
I used it for about an hour and when I removed it this time I had no fluid at all at the tip of the glans.
I am going to try this again and report back to make sure it wasn’t just a one time thing.
When will they be available for ordering?
Here’s my update on fluid retention at the tip of the glans.
So of course you begin to notice the details the more you try something.
What I noticed yesterday after removing the the silistretcher with an hour use at half a turn is that when I have the silistretcher to the right on the belt the right side of glans tip has more fluid when I remove the silistretcher and when to the left the left tip has more fluid.
The pressure was somehow being concentrated in this area and I think it is why I had fluid build up.
Another thing I noticed is that the cup would be angled in a bit, instead of straight, where the glans meets the silistretcher cup/ piston, when applied to belt, so I think this is how the pressure was being concentrated on the tip of my glans.
I thought how do I even out the pressure on the glans and prevent the angling of the silistretcher cup when wearing it?
This may have already been mentioned not sure.
I waited about an hour, so that all the fluid was gone from before, even though it usually goes away after about 5 minutes with light massage.
What I did was put the silicap on by rolling the edges so that it was like a condom and rolled it onto the glans, then I twisted the piston all the way in on the silistretcher cup and let it down 1 full turn, so I can get pressure when I apply the silistretcher.
Now I know the recommended position is for the glans not to be in the cup that far in, but I had to try this to see if it would help with fluid.
So I put the glans in pretty much inside the cup with silicap on, pulled the sleeve over, and applied half a turn. The grip on the shaft felt better than before also, mind you I was using the short sleeves.
I used it for about an hour and when I removed it this time I had no fluid at all at the tip of the glans.
I am going to try this again and report back to make sure it wasn’t just a one time thing.
I will definitely be getting some of these silipads.
When will they be available for ordering?
Here’s my update on fluid retention at the tip of the glans.
So of course you begin to notice the details the more you try something.
What I noticed yesterday after removing the the silistretcher with an hour use at half a turn is that when I have the silistretcher to the right on the belt the right side of glans tip has more fluid when I remove the silistretcher and when to the left the left tip has more fluid.
The pressure was somehow being concentrated in this area and I think it is why I had fluid build up.
Another thing I noticed is that the cup would be angled in a bit, instead of straight, where the glans meets the silistretcher cup/ piston, when applied to belt, so I think this is how the pressure was being concentrated on the tip of my glans.
I thought how do I even out the pressure on the glans and prevent the angling of the silistretcher cup when wearing it?
This may have already been mentioned not sure.
I waited about an hour, so that all the fluid was gone from before, even though it usually goes away after about 5 minutes with light massage.
What I did was put the silicap on by rolling the edges so that it was like a condom and rolled it onto the glans, then I twisted the piston all the way in on the silistretcher cup and let it down 1 full turn, so I can get pressure when I apply the silistretcher.
Now I know the recommended position is for the glans not to be in the cup that far in, but I had to try this to see if it would help with fluid.
So I put the glans in pretty much inside the cup with silicap on, pulled the sleeve over, and applied half a turn. The grip on the shaft felt better than before also, mind you I was using the short sleeves.
I used it for about an hour and when I removed it this time I had no fluid at all at the tip of the glans.
I am going to try this again and report back to make sure it wasn’t just a one time thing.
Awesome!
It's completely fine to put the top end of your penis into the SiliStretcher as long as the piston is retracted into the SiliStretcher (3 full turns or so) before you apply vacuum.
The problem is, when people have the piston fully extracted and apply SIliSleev to the penis and then retract the piston and penis into the SiliStretcher. They are then sucking the SiliSleev inside as well which pinches and weakens the SIliSleev and creates pin holes.
The SiliPad is built Into the piston on the new SiliStretchers shipping this week. So current owners would have to simply replace the piston for the new version.
?? How much do you imagine it could handle? 40-50 pounds?
Is there any pics of the new contoured Silicone SIliPad..I defiantly want one for my SiliStretcher..How do we go about getting one..
No pictures yet, very soon ?
I already have the SiliStretcher how do I get the silipad?
The SiliPad piston will be a free upgrade for current SiliStretcher owners as long as you wrote a review on the SiliStretcher. You will will be required to pay shipping (about $3.00 in the US).
What about international shipping ?
I will be picking one of these up, nice work guys
Awesome let me know when it comes in and all help you with incorporating it into your routine. You’re gonna love your awesome let me know when it comes in and all help you with incorporating it into your routine. You’re gonna love your SiliStretcher!
We are due to have the new mold ready in 2-3 weeks. Hang in there
(fire)(clap)(fire)
I have a routine already to go! The second I get my sleeves and give this a go I have another routine that will blow your mind. I’m hoping that I can exceed 50 pounds to create a hard-core version of Reverse Pyramid Hanging.
Haursen
The Godly PE Journeyman
Haursen's Review of The SiliStretcher
Is the SiliStretcher (SSR) right for you? Does it live up to all the hype surrounding it? Will investing your money in this device pay off in the end?
These are all great questions any discerning man will need to ask if you are considering investing in this device.
I will do my best to give an honest review of the device from a perspective of a PE veteran (since 2014) and my third real PE device (the first being Cable Clamps and the second being Stealth Innerwear) after using the SSR for over a week.
I will review using categories such as:
I will also use a star rating from 1 (worst) to 5 stars (world-class)
Let’s start with investment.
Investment/Warranty
The SSR claims to be an All-Day Stretcher (ADS). This is my first stretching device so I did not have anything to compare it to. However, when I researched further, Lightning (one of the owners of the site) stated that the SSR is affordable compared to the popular Phallosan.
Phallosan’s investment is $339.00 (minus shipping) while the SSR has an investment of $199.00 (minus shipping). You would save $140 off the top.
Phallosan’s Package includes:
SSR’s Package includes:
While you may get more equipment with the Phallosan, you will find out that the SSR is more versatile as a PE device. You can use the SSR not only as ADS, but you can also use the SSR as a penis hanger (you would start off with lightweight). Matters of Size (MOS) Research and Development is introducing the option to hang heavier weight in the future.
In addition, MOS gifts you with four silicone penis sleeves that can function as a healing device to wear all day and sleep in (which I have done both successfully) and the various sizes can help you depending on your goal is either length or girth. MOS doesn’t stop there...they also give you the unique MOS gripping powder so you can say goodbye to using clothes or tissue paper to use as a grip for PE exercises.
Recently, MOS has added an inline tension scale to help you determine the correct pulling strength of your SSR. What forward thinking this is!
The biggest factor in investing in SSR is the warranty. While Phallosan offers an equipment warranty for a two-year warranty on all parts excluding vacuum condoms and protector caps. MOS offers an unheard of warranty in the male enhancement business...a lifetime guarantee. This impressive guarantee gave me the assurance that I wasn’t a number to them...I was a client who is valued for investing in their product and they stand behind their products and to me, this makes MOS untouchable.
Investment/Warranty Final Score: 5 out 5
Ease of Use
When you invest in the SSR, you will receive in the carrying bag a slip of paper with a bit.ly hyperlink address to their product page. The page will display videos to help you in fitting the SSR properly.
You may need to watch them a few times in order to make sure you understand the concept of vacuuming properly. If you get stuck, the MOS forums are available for questions and the moderators/admin are fast to answer your concerns.
After I spent time with the videos, I was able to fit the SSR. The downside is that I had little girth so the SSR would slip off. I learned that I had to squeeze the air out of the SSR’s sleeve and then fit it. The suction is doable yet will still slip off if I put too much tension. Other users may have had success in high tension...unfortunately, I wasn’t one of them.
I came up with the solution to use a self-adhesive wrap around the SSR and now I can use high tension with no issue. I still have to wrap which is the only downside.
Ease of Use Rating: 4 out of 5
Quality of The Materials & Innovation
The parts of the SSR are durable and sturdy. The vacuum compartment is well-designed and fool-proof to where if you were to accidentally pop-out the piston, you can fix it easily by placing it back in.
The straps are solid in their design although the one strap that has the clip on it (at least the one I had) wasn’t threaded on completely so I have to be careful when removing it from the padding. The velcro holds snuggly when placed and does not yield at all.
The 4 silicone sleeves (SiliSleeves) are admittedly my favorites because you can use them for other uses such as a version of the Uncle Jim’s Wrap or as noted above to sleep with them on. There is a silicone cap (SiliCap) that you can wear during hanging to prevent fluid retention. You will need to be careful though...the cap is thin and will tear easily. Mine has a small tear so I will need to trim it.
MOS makes the claim that the SSR has taken 15 years to create and there is a reason why...the innovative option to stretch in six-directions. Thus far, I have stretched (with the waist belt on) on the left and the right. I have also stretched going down on my left leg and my right leg.
To my knowledge and my research, Phallosan cannot do this option. Bravo to MOS.
Quality of the Materials & Innovation: 4 out of 5
Comfort Level
When I wear wrapped SSR, I do not feel any pain whatsoever. Even before I started to wrap, there was no pain or pinching. Now bear in mind, if you decide you want strong vacuum suction and suck your glans into the vacuum, you may experience pain. I have read of others who have done this. For me though, I am not going to go that extreme.
Comfort Level: 5 out of 5
Shopping Experience
You can tell a lot about a company by their customer service and MOS is spectacular in this department. When I ordered the SSR on MOS store page, a chat agent was available to answer any questions I had. I had the option to have MOS text me to follow my order through the mail.
I would receive frequent updates on the status of shipment all the way until when the package was delivered. MOS even admitted they had a mistake when they did not include an extra SiliSleeve and sent it to me free of charge.
MOS also offers upgrades to their products (I do not know if they will be free to us as clients) however if they do, this would be another way of setting them apart from other PE device companies. I have been very pleased with their customer and shopping experience.
Shopping Experience: 5 out of 5
Final Thoughts
Because this is an honest review, I need to give full disclosure that MOS is offering us as clients the incline tension scale if I write a review. While this is a great incentive, you as a reader still deserve the truth about the experience of the SSR and to see if this would be a product worth investing in.
I hope I have answered the lingering concerns you may have as a shopper/investor. I invite you to join the MOS forums to ask questions that this review did not answer and do your own due diligence as I did...I do not regret investing in the SSR and this is what it is...an investment...I want to be the very best version of myself in my sexual development and the SSR is helping me to do that.
Final Score: 4.8 out of 5.0
Is the SiliStretcher (SSR) right for you? Does it live up to all the hype surrounding it? Will investing your money in this device pay off in the end?
These are all great questions any discerning man will need to ask if you are considering investing in this device.
I will do my best to give an honest review of the device from a perspective of a PE veteran (since 2014) and my third real PE device (the first being Cable Clamps and the second being Stealth Innerwear) after using the SSR for over a week.
I will review using categories such as:
- Investment/Warranty
- Ease of Use
- Quality of The Materials & Innovation
- Comfort Level
- Shopping Experience
I will also use a star rating from 1 (worst) to 5 stars (world-class)
Let’s start with investment.
Investment/Warranty
The SSR claims to be an All-Day Stretcher (ADS). This is my first stretching device so I did not have anything to compare it to. However, when I researched further, Lightning (one of the owners of the site) stated that the SSR is affordable compared to the popular Phallosan.
Phallosan’s investment is $339.00 (minus shipping) while the SSR has an investment of $199.00 (minus shipping). You would save $140 off the top.
Phallosan’s Package includes:
- Elastic belt
- Suction bell in size L with L-sleeve condom
- Suction bell in size M with M-sleeve condom and assembled tension clip
- Suction bell in size L with S-sleeve condom
- 4 sleeve-condoms (1x S, 2x M, 1x L)
- 2x protector caps
- Tension clip
- Suction ball with 3-way valve
- Instructions for use
- Measuring template
- Travel bag
SSR’s Package includes:
- 2.5 lb. (1.3kg) starter weight set and hanging arbor
- All-Day-Stretching belt for six-way stretching
- Four SiliSleeves (Two Long and Two Short) and one SiliCap
- MOS Grip gripping powder
- Silicone lube for maintenance
- Discrete carrying bag
- Optional inline tension scale for monitoring ADS tension.
While you may get more equipment with the Phallosan, you will find out that the SSR is more versatile as a PE device. You can use the SSR not only as ADS, but you can also use the SSR as a penis hanger (you would start off with lightweight). Matters of Size (MOS) Research and Development is introducing the option to hang heavier weight in the future.
In addition, MOS gifts you with four silicone penis sleeves that can function as a healing device to wear all day and sleep in (which I have done both successfully) and the various sizes can help you depending on your goal is either length or girth. MOS doesn’t stop there...they also give you the unique MOS gripping powder so you can say goodbye to using clothes or tissue paper to use as a grip for PE exercises.
Recently, MOS has added an inline tension scale to help you determine the correct pulling strength of your SSR. What forward thinking this is!
The biggest factor in investing in SSR is the warranty. While Phallosan offers an equipment warranty for a two-year warranty on all parts excluding vacuum condoms and protector caps. MOS offers an unheard of warranty in the male enhancement business...a lifetime guarantee. This impressive guarantee gave me the assurance that I wasn’t a number to them...I was a client who is valued for investing in their product and they stand behind their products and to me, this makes MOS untouchable.
Investment/Warranty Final Score: 5 out 5
Ease of Use
When you invest in the SSR, you will receive in the carrying bag a slip of paper with a bit.ly hyperlink address to their product page. The page will display videos to help you in fitting the SSR properly.
You may need to watch them a few times in order to make sure you understand the concept of vacuuming properly. If you get stuck, the MOS forums are available for questions and the moderators/admin are fast to answer your concerns.
After I spent time with the videos, I was able to fit the SSR. The downside is that I had little girth so the SSR would slip off. I learned that I had to squeeze the air out of the SSR’s sleeve and then fit it. The suction is doable yet will still slip off if I put too much tension. Other users may have had success in high tension...unfortunately, I wasn’t one of them.
I came up with the solution to use a self-adhesive wrap around the SSR and now I can use high tension with no issue. I still have to wrap which is the only downside.
Ease of Use Rating: 4 out of 5
Quality of The Materials & Innovation
The parts of the SSR are durable and sturdy. The vacuum compartment is well-designed and fool-proof to where if you were to accidentally pop-out the piston, you can fix it easily by placing it back in.
The straps are solid in their design although the one strap that has the clip on it (at least the one I had) wasn’t threaded on completely so I have to be careful when removing it from the padding. The velcro holds snuggly when placed and does not yield at all.
The 4 silicone sleeves (SiliSleeves) are admittedly my favorites because you can use them for other uses such as a version of the Uncle Jim’s Wrap or as noted above to sleep with them on. There is a silicone cap (SiliCap) that you can wear during hanging to prevent fluid retention. You will need to be careful though...the cap is thin and will tear easily. Mine has a small tear so I will need to trim it.
MOS makes the claim that the SSR has taken 15 years to create and there is a reason why...the innovative option to stretch in six-directions. Thus far, I have stretched (with the waist belt on) on the left and the right. I have also stretched going down on my left leg and my right leg.
To my knowledge and my research, Phallosan cannot do this option. Bravo to MOS.
Quality of the Materials & Innovation: 4 out of 5
Comfort Level
When I wear wrapped SSR, I do not feel any pain whatsoever. Even before I started to wrap, there was no pain or pinching. Now bear in mind, if you decide you want strong vacuum suction and suck your glans into the vacuum, you may experience pain. I have read of others who have done this. For me though, I am not going to go that extreme.
Comfort Level: 5 out of 5
Shopping Experience
You can tell a lot about a company by their customer service and MOS is spectacular in this department. When I ordered the SSR on MOS store page, a chat agent was available to answer any questions I had. I had the option to have MOS text me to follow my order through the mail.
I would receive frequent updates on the status of shipment all the way until when the package was delivered. MOS even admitted they had a mistake when they did not include an extra SiliSleeve and sent it to me free of charge.
MOS also offers upgrades to their products (I do not know if they will be free to us as clients) however if they do, this would be another way of setting them apart from other PE device companies. I have been very pleased with their customer and shopping experience.
Shopping Experience: 5 out of 5
Final Thoughts
Because this is an honest review, I need to give full disclosure that MOS is offering us as clients the incline tension scale if I write a review. While this is a great incentive, you as a reader still deserve the truth about the experience of the SSR and to see if this would be a product worth investing in.
I hope I have answered the lingering concerns you may have as a shopper/investor. I invite you to join the MOS forums to ask questions that this review did not answer and do your own due diligence as I did...I do not regret investing in the SSR and this is what it is...an investment...I want to be the very best version of myself in my sexual development and the SSR is helping me to do that.
Final Score: 4.8 out of 5.0
What an incredible an in-depth review. I am so happy that we almost came to five stars.
Especially since it our first release of the SiliStretcher. From this point forward if just gets better and better.
The scale as an incentive to make the review takes nothing away from the effectiveness of the SiliStretcher. Your honesty far exceeds the inexpensive gift we are offering. And we’ve had many reviews already to the greatness that the SiliStretcher is.
I hope many people see review and read through it and taking every bit of text in so they can see just how valuable the SiliStretcher is.
I’m holding off of my review until I get the new Deuro sleeve so I can test out much heavier weight. But so far all I have is good things to say. Thanks again for your review.
Especially since it our first release of the SiliStretcher. From this point forward if just gets better and better. The scale as an incentive to make the review takes nothing away from the effectiveness of the SiliStretcher. Your honesty far exceeds the inexpensive gift we are offering. And we’ve had many reviews already to the greatness that the SiliStretcher is.
I hope many people see review and read through it and taking every bit of text in so they can see just how valuable the SiliStretcher is.
I’m holding off of my review until I get the new Deuro sleeve so I can test out much heavier weight. But so far all I have is good things to say. Thanks again for your review.
Haursen
The Godly PE Journeyman
Maybe as you come up with different upgrades (similar to Windows Operating Systems like Windows ME, Windows XP, Windows 8)...You can name the different SiliStretcher versions like:
Sharon, Olivia, Jesse...This would be a fun way to introduce new versions of the Stretcher.
Linux Mint Operating System does this too whenever they release a new version...You can check that out below:
But of course! We need data from many users in order to get a great understanding of the platform were using and if there’s any kind of improvements we can make. The more people that review this honestly help us to make a much better product. So I hope others will follow your queue and start to make reviews so other users have confidence
@Haursen
Incredible! Thank you for your in depth review. When you mentioned you were working on a comprehensive review, I wasn't expecting this much detail. This gives me so much inspiration to keep taking our products to the next level.
As far as future upgrades, if you are a member of MOS and follow this thread, we will honor upgrades as long as you cover shipping until we release a new package.
Incredible! Thank you for your in depth review. When you mentioned you were working on a comprehensive review, I wasn't expecting this much detail. This gives me so much inspiration to keep taking our products to the next level.
As far as future upgrades, if you are a member of MOS and follow this thread, we will honor upgrades as long as you cover shipping until we release a new package.
Last edited:
StonerWithABoner
Active member
New SiliStretcher update. We have sourced a new hanger attachment to minimize the size of the SiliStretcher for the SiliScale and beef it up for robust hanging with the new SiliSleev Duros.
There is nothing wrong with the first version, this update just minimizes the overall length when adding the SiliScale inline.
We will also have first run SiliPads by this weekend.
View attachment 1821374
View attachment 1821373
There is nothing wrong with the first version, this update just minimizes the overall length when adding the SiliScale inline.
We will also have first run SiliPads by this weekend.
View attachment 1821374
View attachment 1821373
Last edited:
That’s what’s up! This is going to take the SiliStretcher into hardcore habging territory! I can’t wait to test!!! That is begging for 50 pounds! All I can think of when I see it is
View attachment 1821385
View attachment 1821385
Even though the SiliStretcher is capable of hanging heavier weights, the SiliSleev is the determining factor here. This is primarily a robust ADS system with hanging capabilities and wasn't intended for hardcore heavy hanging.
For people looking to hang 50lbs, get the LengthMaster or Bundle /Hanger Attachment..
For people looking to hang 50lbs, get the LengthMaster or Bundle /Hanger Attachment..
Last edited:
What do you think the SiliStretcher will hold with the Duro Dura Sleeves and with the contoured silicone SIliPad..Any ideas ! Also will the shorter weight attachment be available to put on the older models of the SS. With the stock long weight cable my weights are 1 inch from the floor now when I Hang from my computer chair..A firm pillow cushion helped raised me up a tad but I do like the short cable indeed,especially if I get the SiliScale..Also,are the Silicone SIliPads almost ready for the store..I Defiantly would like one of those for shure.
I hope so too! I like the way the silisleeve feels when hanging compared to the length master. Also easier to not be shifting around a bunch of tools....
Both incredible tool and serve their very own purpose while sharing other functions. I think, in SRT, the version I like best is when the SiliStretcher and the Lengthmaster are used together. Another wonderful thing about the SiliStretcher is it’s ability to heal in a passive mode. Even to bed for some.
The ultimate routine, I like that. 10 pounds is a great amount of weight but believe me you can go higher and higher. I got the 70 pounds on the Lengthmaster. I’m hoping to get 50 pounds with a SiliStretcher. I just had him so much fun putting routines together especially when I have new equipment to work with.
Here you go my Brother. Very powerful choice indeed!
Would you be able to mod our existing 1st gen cable connector to this new one if we send our silistretcher in.
Just wondering cuz you guys are making this thing more and more awesome.
Yes, we are going to offer that to all our members as long as shipping is covered both ways.
Last edited:
Since my last update I have put on Silistretcher 5 times, wearing at 1 hour increments with no fluid retention on glans tip after I remove Silistretcher.
One thing I am doing different than in the beginning is I am rolling up the silicap like a condom and then rolling it down on the glans instead of stretching over the glans.
Also starting further in the Silistretcher cup and only using a half turn as I am using more in ADS mode. I am yet to try the weights, but I will be sure to update if I use them.
When Lightning reported how much pressure per turn that was an eye opener on how much pressure the Silistretcher can produce.
Yes, it is amazing how much vacuum the SiliStretcher can produce.
In all honesty, I don't see any other ADS that can topping this for comfort, ease of use, stretch tensity, price and minimal footprint. And the fact its self contained is just(fire)
So simple but yet so effective.
In all honesty, I don't see any other ADS that can topping this for comfort, ease of use, stretch tensity, price and minimal footprint. And the fact its self contained is just(fire)
So simple but yet so effective.
New SiliStretcher ADBS All Day Bundle Stretch attachment in development!
As many of you know, bundle stretches are very effective for gaining size. With our new SiliStretcher bundle attachment you will now have the ability to stay in All Day Bundle Stretch (ADBS) while in ADS mode or do manual bundle stretches just like the LengthMaster but in a stealth state.
We are aiming to have these available early May.
As many of you know, bundle stretches are very effective for gaining size. With our new SiliStretcher bundle attachment you will now have the ability to stay in All Day Bundle Stretch (ADBS) while in ADS mode or do manual bundle stretches just like the LengthMaster but in a stealth state.
We are aiming to have these available early May.
Last edited:
@Lightning, so how soon can we send Silistretchers back for new connector.
I would wait for the SiliPads to be ready this week and we can do them both in one shot. It would ship back out the same day it comes in.
@Lightning any pictures/info on the bundled stretch attachment?