So i finally cracked this [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] extreme and went to go grab my other [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] that i had stashed for just such an emergency, and i noticed that it had somehow cracked as well... I have been completely packing the tube girthwise every day for a while now and i thought that i could gain some length in the process of cementing girth gains. Well, even though i use a lot of coconut oil and shave properly and do everything right i have been suffering from bleeding at the urethra on and off for a while. it is, as DLD has said before, from when the head of your dick gets roughed up. i cant really stop it from happening and i think i need to get a bigger tube anyways. Unfortunately they are very expensive... i guess i am just going to bite the bullet and buy the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x50[/words] extreme, but if it is too big i will be in trouble because i will have to buy another [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]...
forced to upgrade? (warning: graphic details)
ok, i just bought the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x50[/words] extreme with express shipping. hopefully this is good.
I'm curious to know what could be the cause of the bleeding
huge-girth;761544 said:
When the dick head gets smashed along the ridge of the tube I’m pretty sure while I start to pump. It causes no pain but it must be causing a small cut or Knick. Also it looks fucking scary obviously
Now i understand. With the new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] extreme, you are on your way to 8 inches girth.
huge-girth;761549 said:
I hope so.
I just called every sex store in my city, the biggest diameter tube they sell is 2.5 inches. Wtf
Get yourself a single mother. They have the big pussy you seek.
super depressed right now, i guess pumping was the only thing keeping me sane... the only pumps i have left are a duct taped 2.75 and the long johnny. i will try to figure something out, waiting for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x50[/words] is going to be grueling. yes i know i sound like i have mental problems.
I have the Long Jonny 12x4" and I still have the Thickwall Deluxe 10x3" which I don't use anymore (both can be used with water). Already quite a step from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Goliath[/words] diameter. I don't think anybody can pack tubes that are sized as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words], maybe at the base but not midshaft. So once you have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] you should be safe forever.
cladre60;761557 said:
Shorty mac is up to 8 inches girth. It's usable
acromegaly;761562 said:
Do you have any idea what caused the crack on both pumps?
acromegaly;761562 said:
No mental problem acro, this stuff is just addictive. Packing the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] is not a bad problem to have although I can't say I know how you feel, rofl. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x50[/words] should keep you for a good while
Big Schwanz Acht
@Big Schwanz Acht
it's just plastic, so depending upon where it cracked it shouldn't be too tough to repair. I know I'd miss my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and I only use my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Goliath[/words] about 10% of the time
The valve part between the end cap and the pump cracks eventually from everyday pumping and pressure. It happens to all pumps not just [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]bath mate[/words]huge-girth;761575 said:
- - - Updated - - -
I’m doing longjonny cock only right now it’s really weird but getting the job done for now I guessChaoskampf;761633 said:From left to right: Thickwall Long Jonny 12x4", [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Goliath[/words] 10x2.75", Thickwall Deluxe 10x3", Utimi 8x2.5"
Big Schwanz Acht
@Big Schwanz Acht
acromegaly;761643 said:
so here's a 'quick-fix' to get you through the delay until your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] arrives...remove the entire valve assembly so all you're left with is the cylinder and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words]. Take your VacuVin cork and squeeze it in the opening, once you begin pumping, it'll seal-up due to the pressure
acromegaly;761643 said:
That sounds tough. A cylinder of this size and then pumping only shaft. I tend to believe that this causes large increase in base girth.
If I remember correctly Big Schwanz Acht asked in the past how to create a tapered shaft - by making use of oversized cylinders would be my suggestion.
Big Schwanz Acht
@Big Schwanz Acht
Chaoskampf;761649 said:
not me, but I do recall someone posing that question (I have a slight baseball bat shape)
Big Schwanz Acht;761634 said:
Why would the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] be better?
Big Schwanz Acht
@Big Schwanz Acht
Big Schwanz Acht;761652 said:
Nice to see your use of German words. Do you have a German background or where does this come from?
I never really packed anything but just went up in cylinder diameter because I felt the need to give the base more space once just the base packed the bottom of the cylinder.
But in general I don't think anyone will ever pack the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Goliath[/words] midshaft.
Big Schwanz Acht
@Big Schwanz Acht
1/4 German (my username is a slight homage to that)
try packing a smaller tube and see if you like it (it does take a bit of getting used to, tho)
try packing a smaller tube and see if you like it (it does take a bit of getting used to, tho)
Big Schwanz Acht;761654 said:
Nice bro.
The funny thing is that I don't even pack the smallest cylinder I have (the Utimi to the right of my picture that I uploaded earlier in this thread).
I don't know how this works but I went up in cylinder sizes throughout my pumping career but when I go back to the Utimi the expansion looks the same as during my very first pumping session. Let's me doubt my supposed gains of course. Maybe the entry diameter of that cylinder is just too small to allow the base to fully spread. Anyway the Utimi is just too uncomfortable due to the small cross section of the flange. I pump shaft only with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Goliath[/words] and full package with the Long Jonny. The 'sack' / scrotum is about to blow up afterwards though. I don't know what is expanding inside, can't be the balls.
Big Schwanz Acht;761654 said:
20 Zentimeter - Frenzy Blitz (official music video) - originally from Möhre
https://www.youtube.com/watch?v=iVqoQW3svx8
Translation:
20 cm - 8 inches
that is never 20 cm
never ever little peter
in reality 20 cm are much larger
forget it
really you must have measured the wrong way
plain and simple
from shortys I will run
20 cm
not now nor later
admit it
it is easy to overlook
brevity is the soul of wit
but I like it long and girthy
you however fell short
no chance for a flirt
just forget it
you must have measured wrongly
I know it is mean
it is small and it is yours
if you turn up with miss boner
at my door at nighttime
then we take your ruler
and measure once more
17 are okay (6.75")
18 don't hurt (7")
19 I find beautiful (7.5")
20 if they stand strong (8")
Last edited:
Chaoskampf;761653 said:
The last few times I used the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words], I was having [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite. Do you think it's wise for me to move to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] extreme?
acromegaly;761643 said:
But my pumps are not currently in use at the moment. Should I expect a life expectancy of 2 years for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]?
Chaoskampf;761656 said:
Oh, 6.75" is just okay? I'm currently 6.375" and I'd have her choking and begging me to stop with that. Dumb hoe probably has an 8" dildo and doesn't take into account that she's holding on to 3-4" of it while fucking herself.
Maybe that's what the song is about, an homage to her dildo collection. Any chick listening to that song and believing it is in for a big shock if she ever comes across an 8" dick.
Chaoskampf;761655 said:
How long have you been pumping? When you say your scrotum is about to blow up, do you mean you put your balls inside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Goliath[/words] while pumping?
huge-girth;761677 said:
Pumping for roughly one year. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Goliath[/words] is too small to pump both shaft and balls. Works but too painful. But if I put both in I will reach until the 22cm mark. When the balls are outside I usually stop at the 21cm marking.
As you can imagine if you have a cylinder that is 4" wide you can insert both shaft and balls. Now the scrotum expands to 31.7cm diameter.
Circumference of a circle = pi * diameter = 3.142 * 4" = 12.5" = 31.7cm
Last edited:
cladre60;761675 said:
No man. It is more of a provocation. In the metric system the 20cm is the best of the best. Unfortunately nobody has this size. 20cm is the unthinkable for normal people.
This song is used on traditional binge drinking festivals.
huge-girth;761673 said:
Yes sir.
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] is 7.06" circumference
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] is 7.85" circumference
Yes abouthuge-girth;761674 said:
Chaoskampf;761706 said:
Interesting, so maxing out the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] in girth will take me to 7.5 inches mid shaft? Or is it more than that?
acromegaly;761708 said:
I've decided to just upgrade to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] without wasting time. I will start using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] from January no doubt about that.
huge-girth;761739 said:
Yes. Even more would be possible. 7.85" the absolute limit. However maybe your base girth increases faster and then you might get a problem with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite again. But I have never seen anybody packing the XXL Bathmates midshaft.
Chaoskampf;761844 said:Yes. Even more would be possible. 7.85" the absolute limit. However maybe your base girth increases faster and then you might get a problem with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite again. But I have never seen anybody packing the XXL Bathmates midshaft.
But even if I get [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] I can still continue using it until my midshaft max out the tube right? And same applies for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] right?
doublelongdaddy;761781 said:
I need to make the best use of this remaining 7 months. I really don't know how I can increase intensity with my length routine. I need to get to at least 8.5 inches in length. Hopefully my July 14th measurement will be encouraging and revealing too.
huge-girth;761859 said:
Yes. As long as you are fine with the pressure (and maybe pain) on your base.
Chaoskampf;761844 said:Yes. Even more would be possible. 7.85" the absolute limit. However maybe your base girth increases faster and then you might get a problem with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite again. But I have never seen anybody packing the XXL Bathmates midshaft.
Holy mother of God are you just about filling that tube with girth?!?
cladre60;761946 said:
I found this picture online. But this guys has a superb length. His girth looks a bit odd. A little bit like a sponge again. Never happened to me while pumping.
huge-girth;761860 said:
I know you have goals and I hope you reach them in the timeframe you've set but PE isn't a sprint. Don't increase your intensity to the point of injury. You'll get where you want in time. I'll be really happy to add 5/8" length by the end if the year bringing me to 7" but if I'm shy of that I'll just keep going.
cladre60;761960 said:
I doubt that the testicles would climb that high.
Chaoskampf;761895 said:
I'm fine with the pressure/pain at the base. But I will be buying 2 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] extreme in my next purchase hopefully before Christmas. The thoughts of having those massive expansion is all in my head.
Chaoskampf;761844 said:Yes. Even more would be possible. 7.85" the absolute limit. However maybe your base girth increases faster and then you might get a problem with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite again. But I have never seen anybody packing the XXL Bathmates midshaft.
What do you think is the length of this guy in reality?