Girth work NEW - MOS MityVac HydroVac Penis Pump Line - L@@K

huge-girth said:
Will this pump give me the same big temporary expansion just like the bathmate?
Click to expand...

Yes, that is what I wrote in the last sentence in my post above. Many ���� studs use vacuum pumping before scenes to expand their girth to the maximum fullness.
 
Lightning said:
Yes, that is what I wrote in the last sentence in my post above. Many ���� studs use vacuum pumping before scenes to expand their girth to the maximum fullness.
Click to expand...


Thanks for the heads up.
 
Lightning said:
I personally like vacuum for quick easy pump sessions anywhere that water is not available. Most people use Bathmates in the shower. Bathmates usually require a shower strap because if you move the pump too much in one direction, you break the seal between your body and the comfort seal. The MityVac doesn't have that issue because there is a detachable sleeve built in to the cylinder that is attached to the base of your penis, not your body.

Hydro pumping reduces fluid build up in your penis by the water acting as a hydro sleeve. With the silisleev, there is really no need for water. You have four options with the MityVacs, you can hydro pump with or without the silisleev and you can dry vacuum pump with or without the silisleev. This system allows you to practice pumping to it's full potential.

I tend to see quicker results with vacuum pumping over hydro pumping myself and don't like the clean up of water messes (lazy me). Allot of ���� studs do vaccum pumping before a scene to add instant fullness to the penis.
Click to expand...
Huh. Okay. I haven't had a problem with my bathmate losing suction from movement and I never use a shower strap but I definitely DO get fluid build up so my experience is a little different from yours.

And I actually like the shower aspect. I can pump while I'm getting cleaned up, usually right before sex. But I am tired of the fluid build up and the ridges digging in to my penis when I use my x30. So I gotta switch something up. I'm too big for the x30 now anyway. I think that's part of the problem.

The mityvac definitely looks cool. This is a toughie, as Weasel from Deadpool would say. Lol.
 
Last edited:
JB007 said:
Huh. Okay. I haven't had a problem with my bathmate losing suction from movement and I never use a shower strap but I definitely DO get fluid build up so my experience is a little different from yours.

And I actually like the shower aspect. I can pump while I'm getting cleaned up, usually right before sex. But I am tired of the fluid build up and the ridges digging in to my penis when I use my x30. So I gotta switch something up. The mityvac definitely looks cool. This is a toughie, as Weasel from Deadpool would say. Lol.
Click to expand...

Hmm, you able to let your Bathmate hang down loosely and freely move around and not lose suction? As far as fluid build up, It is quite less with the Bathmate than dry vacuum pumping without a sleeve. Dry vacuum pumping without a sleeve will cause a deformed penis (the donut effect or baseball bat shape).
 
Lightning said:
Hmm, you able to let your Bathmate hang down loosely and freely move around and not lose suction? As far as fluid build up, It is quite less with the Bathmate than dry vacuum pumping without a sleeve. Dry vacuum pumping without a sleeve will cause a deformed penis (the donut effect or baseball bat shape).
Click to expand...
No, it doesn't really hang down, more like slightly below parallel. I do kinda have to support it with one hand though so it doesn't start to hang like you mentioned. But that fucker is on there. I couldn't lose suction if I tried. But like I said, I do get build up and deep ass ridges. Tired of it.
 
You guys come up with good stuff!!!!
I tried sleeping with the sleeves and its like you never wore them?!?!?!?!
It would be great to have a tutorial on how this works, im out of money but in the future for sure ill get it!!
1819779
 
JB007 said:
No, it doesn't really hang down, more like slightly below parallel. I do kinda have to support it with one hand though so it doesn't start to hang like you mentioned. But that fucker is on there. I couldn't lose suction if I tried. But like I said, I do get build up and deep ass ridges. Tired of it.
Click to expand...

Think about getting the silisleeves, because they reduce fluid retention for the session when pumping.

Those deep ridges are a sad side effect of the bathmate when you start to pack it fully, which is why on new models they have inner sleeves.

A silisleeve would prevent your penis from being pressed, and hence forming a ridge.

Your call ... can try wearing a condom if your skeptical, this will help reduce FR to some extent.

From the sounds of it, you need a larger sized pump.

Do you go all in by any chance? balls included?
 
No i used the bathmate for a bit but i would feel alot of my skin been pulled in to it.As well i have alot of turkey neck and i havent been constant with it so i dont know if im just doing it wrong
So im thinking about getting a new device
 
okay questions about the mityvac.
I know it is a new product, but are there or are there going to be any studies on the impacts over a period of time compared to the bathmate or other competitiors?

also, would wearing a sleeve during the session hinder gains in anyway? would it be okay or safe to not use the sleeve during the session then apply the sleeve after? im still a little confused to the effects of a silisleeve besides the healing elongated part.

also, the shipping box is it super discreet? my wife tends too read company names and i havent talked about pumping to her or really want to yet she just thinks im doing manual stuff lol
 
@ ifight145mma

I ordered the sleeves and it just says its from MOS, in a white package and thats it super discreet
As long your wife doesnt open them it should be good (no offense)
 
also last question it says 2" diameter and up, would i just measure my width or should i get a size bigger to accomodate gains??
 
WEll to be honest they can stretch
I was playing with them for a while in order to put them
I honestly ordered the large kit im not that big but it already see the lenght work with these babys
 
REDZULU2003 said:
Think about getting the silisleeves, because they reduce fluid retention for the session when pumping.

Those deep ridges are a sad side effect of the bathmate when you start to pack it fully, which is why on new models they have inner sleeves.

A silisleeve would prevent your penis from being pressed, and hence forming a ridge.

Your call ... can try wearing a condom if your skeptical, this will help reduce FR to some extent.

From the sounds of it, you need a larger sized pump.

Do you go all in by any chance? balls included?
Click to expand...
No. Not a fan of that. It seems really pointless to me and also kind of dangerous.

But yes, you're right. I do need a new size but I'm afraid if I got the hydromax9 it would be too big and that very thing would start happening- my balls getting sucked in. So I gotta figure something out.
 
ifight145mma said:
okay questions about the mityvac.
I know it is a new product, but are there or are there going to be any studies on the impacts over a period of time compared to the bathmate or other competitiors?

also, would wearing a sleeve during the session hinder gains in anyway? would it be okay or safe to not use the sleeve during the session then apply the sleeve after? im still a little confused to the effects of a silisleeve besides the healing elongated part.

also, the shipping box is it super discreet? my wife tends too read company names and i havent talked about pumping to her or really want to yet she just thinks im doing manual stuff LOL
Click to expand...

I'm sure there will be plenty reviews soon. This isn't anything new, we just took existing technology, combined two practices of it into one pump system and perfected it.

The packaging is completely discrete. Here is the actual packing of the MityVac. No labels, nothing on the lables indicates anything about PE or Pumps. We specifically do this because everyone wants privacy.

1819786
1819787

ifight145mma said:
also last question it says 2" diameter and up, would i just measure my width or should i get a size bigger to accomodate gains??
Click to expand...

To gain length, you want a cylinder that is close to your same size erect girth. This allows the penis to expand in on direction only, upward. To gain girth and length, you want a cylinder that is a quarter inch (.25") bigger than your erect girth. This allows the penis to expand In both directions.

Don't get a 4" wide pump cylinder thinking your going to get a 4" wide penis, it dont work like that. You will just get a big deformed mess.

The common sizes we sell are 2" and 2.25" wide. Occasionally someone gets a 2.5". The bigger diameters of for full package pumping (penis and balls together).

Wearing a silisleev while pumping reduces fluid retention. This practice has been around for years. Your penis tissue still expands but keeps excess fluid out of your penis that causes deformities.
 
Last edited:
Lightning said:
I'm sure there will be plenty reviews soon. This isn't anything new, we just took existing technology, combined two practices of it into one pump system and perfected it.

The packaging is completely discrete. Here is the actual packing of the MityVac. No labels, nothing on the lables indicates anything about PE or Pumps. We specifically do this because everyone wants privacy.

View attachment 1819786
View attachment 1819787



To gain length, you want a cylinder that is close to your same size erect girth. This allows the penis to expand in on direction only, upward. To gain girth and length, you want a cylinder that is a quarter inch (.25") bigger than your erect girth. This allows the penis to expand In both directions.

Don't get a 4" wide pump cylinder thinking your going to get a 4" wide penis, it dont work like that. You will just get a big deformed mess.

The common sizes we sell are 2" and 2.25" wide. Occasionally someone gets a 2.5". The bigger diameters of for full package pumping (penis and balls together).

Wearing a silisleev while pumping reduces fluid retention. This practice has been around for years. Your penis tissue still expands but keeps excess fluid out of your penis that causes deformities.
Click to expand...
awesome thanks so much definitely cleared up all of my questions, so considering i have a 5in girth, i should definitely go with the 2in dia cylinder then work my way up from there. im for sure gonna have to try this product out!
 
huge-girth said:
Will this pump give me the same big temporary expansion just like the bathmate?
Click to expand...

Indeed it will. Lightning took all things into account when making this system. If we are going to build something it’s going to be the best.
 
DLD said:
Indeed it will. Lightning took all things into account when making this system. If we are going to build something it’s going to be the best.
Click to expand...


I'm going to buy one before the end of the year.
 
  • Like
Reactions: DLD
You must log in or register to reply here.

Similar threads

squirt_inducer_man
  • Sticky
Video thread MITYVAC - WET AND DRY PENIS VACUUM PUMP SYSTEM
Replies
6
Views
785
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
T
Can't make mityvac hidro pump work
Replies
7
Views
273
DLD
DLD
DLD
H
penis pumping with heat
Replies
16
Views
596
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
P
Should i size up?
Replies
17
Views
644
DLD
DLD
DLD
H
Stage 2 penis pump Cylinders for length
Replies
5
Views
484
DLD
DLD
DLD
Back
Top Bottom