Girth work NEW - MOS MityVac HydroVac Penis Pump Line - L@@K

Our MityVacs come with a Lifetime Warranty, Silisleev Silicone Penis Sleeves for Fluid Reduction, Hydro Water Trap, Pelvic Silicone Comfort Seal, Titan Gel, SiliRings and a Hard Shell Carry Case

Includes

• Six hydro & vacuum cylinder diameter sizes to choose, ranging from 1.75" up to 4".
• Lab grade acrylic vacuum cylinders with flange for comfort. Dimensions 10" (254mm) long with 4mm thick walls and precise measurements in inches and millimeters to track penis gains.
• Quick Release fittings on the cylinder and vac-lines allow pressure to be maintained, without the vacuum pump needing to be attached to the vacuum cylinder.
• Hydro0trap water trap for Hydro Pumping with water.
• High quality ergonomic nylon body vacuum pump and precise vacuum gauge.
• Vacuum range: 0-30 Hg, 0-760 mmHg, with a quick release trigger for safety.
• Two revolutionary designed silicon penis compression silisleevs to reduce fluid buildup and achieve uniform penis gains by eliminating the unwanted baseball bat shape and donut effect deformities caused to the penis.
• One revolutionary designed silicon glans silicap to prevent swelling of the glans.
• Four constriction rings to keep the penis enlarged during and after pumping.
• Soft silicone removable MitySleev pelvic cylinder seal for extra seal and comfort with long term use.
• Russian Titan Gel Penis Lube
• Hard Shell Carry Case
• Lifetime Warranty

What size pump cylinder to order?

To Gain Length
The rule of thumb is if you are focusing on penis length, order a MityVac pump cylinder in a diameter that is closest to the thickest part of your erect penis girth (see measurements below). The idea is to pack your erect penis in the cylinder and pump so your penis only extends in length since it can't expand much in girth.

To Gain Length and Girth
Order a MityVac pump cylinder that is .25" larger in diameter than the thickest part of your erect penis girth. This will allow your penis to expand in girth and length at the same time. Ordering a pump cylinder that is much wider than the girth of your penis is not beneficial and will actually cause you to grow a deformed penis over time. So stick with the recommendations we provide, this is all data collected from pump users over the past 20 years.

How to accurately measure your penis for pump cylinder sizing

Get a piece of string, thread, wire, etc.

Get your penis erect.

Wrap the string around the thickest part of your ERECT shaft or base (whatever is thickest).
For most people, the thickest part of the penis is at the base of the penis by the pelvic bone. In some cases, some men have a thicker upper shaft. If this is the case, measure the thickest part of your shaft.

Mark where the string where it overlaps itself with a pen so that you can see the pen mark on both ends of the string.

Lay the string on a flat surface and measure the distance between the two pen marks with a ruler.

If your erect girth measurement is:

4” to 4.75” Order a 1.75″ diameter pump cylinder
5″ to 5.75” Order a 2″ diameter pump cylinder
6″ to 6.75” Order a 2.25” diameter pump cylinder
7″ to 7.5” Order a 2.5” diameter pump cylinder
7.75” to 8.25” Order a 2.75” diameter pump cylinder

If your measurement is not listed here – Please Contact Us

NOTE: A tailors tape is good to provide accurate measurements. The MityVac standard cylinder length is 9.25 Inches.

How do I Configure my MityVac for Hydro Pumping and Dry Pumping?

How do I use the MityVac Penis Pump?
There are many great routines here in our Penis Pumping Forum. This is a great starters guide below.

Check out more users penis pumping routines in our Penis Pumping Forum

Awedome set up! I love the base ring! This is the newest and hottest out there! Incredible pricing too!

Fuck, you guys are killing it lately. This looks awesome.

So beautiful! But yet so strong! DLD did say about the pricing; as I've been eyeing certain products during the years (even before I started PE), this package is huge bang for the buck.

I feel that my words can't express enough excitement, so I'm just looking forward to Brothers trying it out.
With the included sleeves and that gel, I really don't see excuses for not gaining.
Unless one just buys the tool and puts in on a shelf for display! ?

We always wanted to have our own pump line and finally we are so happy to release this MityVac system.

Personally I've always loved vacuum pumping and understood the benefits of hydro pumping. I own every bathmate model from the Goliath to the Hercules but I really never liked pumping in the shower.

This new MityVac gives you both options now while maintaining a secure seal every time. When you reverse the Silisleev, the contour ridge locks into the silicone pump sleeve creating a foolproof vacuum seal that is next to impossible to lose suction, there is no need to shave the pubes any longer to get a seal. So the silisleev works for three things, its locks you in, eliminates fluid retention while keeping you elongated while pumping.


The MityVac pump sleeve acts as a check-valve or cock ring that traps blood in the penis to keep you expanded while you are pumping, the combination is ingenious.

Another great thing about MityVac line is we have pump cylinders up to 100mm (4") in diameter which trumps Bathmates discontinued Goliath which was 66mm (2.59").



Best thing of all is there is the lifetime warranty. Even if you drop and break it, we will replace it for free, no questions asked! Nobody can beat that!

You may want to grab one now before the regular pricing goes in effect. They are less than the cheapest Bathmate and come with a bunch of extras including a Long Silisleev set, Titan Gel, SiliRings & Carry Case. We are offering at this introductory price to get a buzz started on the forums.

Y'all tryna make my wallet cry!

Must...resist...EENNNNN!

We are now taking all the experience from the 15+ years of MOS, and putting it into these fantastic new products, that are protected by lifetime support + guarantees + 1st class customer support from men who know about not just the products, but penis enlargement incl myself.

MOS isn't just a forum, or a place, its a brand in itself, and these products will take us into the market with such an impact, because they work!

Most other sites that just imitate us, have sub par devices on sale just to make cash without a care for the support of the customer, or service with the product.

You'll see allot simply churn the same information, and merely offer affiliation with products like bathmate, and phallosan.

MOS doesn't need to do this ... we have our own brand, and its the here and now we launch it!

To the competition

If I understand correctly, the silisleeve needs to be worn right before putting the penis inside the pump? If yes, how can I get myself erect and put on the silisleeve?

Secondly, won't the silisleeve work out after some time? Or better still, how durable are the silisleeve since it has to be worn each time I need to use the pump?

You can put on the silisleeve while erect. I've done several sessions now and the sleeves seem to be very durable! And I can be rough-handed at times despite my petite hands. (Does not correlate! )

@Haursen , What animal brutality! :D There is a town, Nara, in Japan that's flooded with deers. Smells like deer shit pretty much everywhere. But it's a lovely place nevertheless.

arkailija said:

@Haursen , What animal brutality! LOL There is a town, Nara, in Japan that's flooded with deers. Smells like deer shit pretty much everywhere. But it's a lovely place nevertheless.

Click to expand...

You have to admit that that suplex was pretty hype though for an old man.

Haursen said:

You have to admit that that suplex was pretty hype though for an old man.

Click to expand...

Oh yes! Actually, the movement has a lot of realistic points to it, he's using his center gravity (stomach) to gain momentum from a heavier object ... Or something. I don't know, but funny gif anyway.

Take a chance on the introduction price. My account or wallet are in torment as well, but they won't care in a while after the gains! That's what the power of a bigger dick can do.

How does the water part work exactly? Can you make a video of some kind? That would be cool.

To my understanding you connect the water "collector" from the cylinder and from the water collector another hose goes to the pumping tool. So it comes to the middle.
@Lightning can correct me if I'm totally of the grid here.

huge-girth said:

If I understand correctly, the silisleeve needs to be worn right before putting the penis inside the pump? If yes, how can I get myself erect and put on the silisleeve?

Secondly, won't the silisleeve work out after some time? Or better still, how durable are the silisleeve since it has to be worn each time I need to use the pump?

Click to expand...

You can be soft or erect when applying the silisleeve, add a little lube to the silisleev or pump sleeve and then vacuum pump yourself right into the cylinder.

JB007 said:

How does the water part work exactly? Can you make a video of some kind? That would be cool.

Click to expand...

A small reservoir slips inline between the MityVac pump handle and cylinder to catch excess water before it gets to the pump handle. It's like a vacuum cleaner, you have an input that sucks and a output that exhausts with a canister inbetween to catch dirt (in this case water). It's simple technology we use everyday.

Then there is a quick disconnect on the pump cylinder to remove the handle once you pumped to the desired pressure.

The great thing about the MityVac pump handle and gauge is that you can monitor your progress as you pump. So every week I would see my tolerance increase before my eyes because I could gauge it. Unlike a Bathmate where you pump and guessimate your pressure.
These pumps are very serious and the vacuum can be set to very extreme pressures with no loss of seal. The precise gauge is an important necessity or you can over pump. It's like driving a brand new caddy, you speed without realizing it.

I will try to get a video of it or at least some pictures.

It is such an awesome thing that we are now completely and absolutely independent from any partner. This sense of freedom is amazing and something that the brotherhood has deserved for a very long time. I think lightning, the moderators for their testing and Helping to perfect the pump. I am not very much into air pump thing but you have that option in the auction is very powerful. But where I am so excited is in the fact that we have our own Hydro pump.

Lightning said:

I will try to get a video of it or at least some pictures.​

Click to expand...

Cool. Do you recommend just using air instead of water? Which is more effective? What are some of the pros and cons of each? Thanks.

JB007 said:

Cool. Do you recommend just using air instead of water? Which is more effective? What are some of the pros and cons of each? Thanks.

Click to expand...

I personally like vacuum for quick easy pump sessions anywhere that water is not available. Most people use Bathmates in the shower. Bathmates usually require a shower strap because if you move the pump too much in one direction, you break the seal between your body and the comfort seal. The MityVac doesn't have that issue because there is a detachable sleeve built in to the cylinder that is attached to the base of your penis, not your body.

Hydro pumping reduces fluid build up in your penis by the water acting as a hydro sleeve. With the silisleev, there is really no need for water. You have four options with the MityVacs, you can hydro pump with or without the silisleev and you can dry vacuum pump with or without the silisleev. This system allows you to practice pumping to it's full potential.

I tend to see quicker results with vacuum pumping over hydro pumping myself and don't like the clean up of water messes (lazy me). Allot of ���� studs do vaccum pumping before a scene to add instant fullness to the penis.

Will this pump give me the same big temporary expansion just like the bathmate?

Please tell me that there will be an MOS electric pump at a decent price....