Using a rubber ball for increased pressure in BathMate

DLD

DLD

Double Long Daddy, The Guru
Staff member
Super Moderator
I was working with a guy who is has a very thick penis but the length is not too long. His measurements were 6" Long x 6.50" in girth. When he used a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] he found it too tight at the base and it caused soreness. He decided to switch up to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] but ran into a problem with pressure. He felt as though he was not getting as much pressure in the tube so I suggested he use a stress ball, one of the small, rubber, squeeze balls, I tol him to put the ball in the pump first, then slip in and PRESTO! Much faster, stronger pressure. This solution worked wonders for him and I thought I would share it here for anyone having similar issues.
 
doublelongdaddy;417285 said:
I was working with a guy who is has a very thick penis but the length is not too long. His measurements were 6" Long x 6.50" in girth. When he used a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] he found it too tight at the base and it caused soreness. He decided to switch up to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] but ran into a problem with pressure. He felt as though he was not getting as much pressure in the tube so I suggested he use a stress ball, one of the small, rubber, squeeze balls, I tol him to put the ball in the pump first, then slip in and PRESTO! Much faster, stronger pressure. This solution worked wonders for him and I thought I would share it here for anyone having similar issues.
Click to expand...

Can you post a picture of the ball?
 
I tried this with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]herc[/words], I usually reach past the 200 mark after about 10 minutes of pumping. I didn't have a small rubber ball so I used something small and football shaped that's half rubber and half plastic. It seemed like I got the most pressure I ever had thanks for the tip.
 
Anything like these guys, the odd shapes are best so the ball does not get trapped in the vacuum.

Promotion-Gift-PU-Stress-Balls-Toys.jpg
 
I ran into a similar problem. My cock is 7.5" X 6.25" in girth. The stress ball method did work for me. I could not figure out why. Anyway, I took a small piece of wood, 1.5" X 1.5" X 3.25" long and sanded it down. This placed in the tube like the stress ball worked. I've now got about the same pressure I had with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].

Dan
 
Dan_Clizer;420039 said:
I ran into a similar problem. My cock is 7.5" X 6.25" in girth. The stress ball method did work for me. I could not figure out why. Anyway, I took a small piece of wood, 1.5" X 1.5" X 3.25" long and sanded it down. This placed in the tube like the stress ball worked. I've now got about the same pressure I had with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].

Dan
Click to expand...


Yes indeed! I am so happy you have tried it and it works for you! Now we gotta get the message out to the rest of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] users who want more pressure.
 
Thanks Mike. I'm really happy about it as well! I appreciate you recommending it. I agree, the more [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] user that know this, the better.

Dan
 
No problem guys, just another mod to make things work better.
 
LOL - you know how hard it is to find one of those fucking things?!?!? The only place I've seen them have been at trade-shows and events like that. WalMart doesn't carry them, nor Target, nor any store like that. HELP!!!
 
MMandingo;422793 said:
LOL - you know how hard it is to find one of those fucking things?!?!? The only place I've seen them have been at trade-shows and events like that. WalMart doesn't carry them, nor Target, nor any store like that. HELP!!!
Click to expand...

Hi MMandingo,

I've tried several things including a small piece of wood that I made to fit. So far, the best thing I've found has been a vitamin supplement bottle. The one I use is: 3.25" long X 2.25" in diameter. If you are longer than 185 in the tube, you will need a shorter bottle though. This has worked well to create very good pressure for me. Fill the vitamin bottle with water as well (and screw the cap on) as this seems to help. Good luck!

Dan
 
Dan_Clizer;422963 said:
Hi MMandingo,

I've tried several things including a small piece of wood that I made to fit. So far, the best thing I've found has been a vitamin supplement bottle. The one I use is: 3.25" long X 2.25" in diameter. If you are longer than 185 in the tube, you will need a shorter bottle though. This has worked well to create very good pressure for me. Fill the vitamin bottle with water as well (and screw the cap on) as this seems to help. Good luck!

Dan
Click to expand...

Great! I'll definitely give it a go!
 
MMandingo;422964 said:
Great! I'll definitely give it a go!
Click to expand...

Yes, give it a shot. Keep trying until you find something that works. The pressure is enormous once you find something that takes up the space. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] just has a "learning curve" and its well worth sticking with it. The results are incredible once you get proper pressure!

Dan
 
Can this work for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] as well? I'm desperate to achieve bigger pressure.
 
It's vacuum not pressure.

If you can get it in there and not have your penis smash up against it, your fine. Make sure you don't touch it because it can hurt you.

If you can't, you still have the wine vac mod. Very easy to do and use, the vacuum will knock your socks off.
 
I'll definitely go with a wine vac, cause it's cheap and available in wine stores, but I was lurking around reading about VacuVin stoppers, and guys are talking about they can't get the stopper on valve on their [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words], it's kinda difficult, and many of them keep writing about [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] Cone instead of stopper, unfortunately I have no such cones and I have [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words], would that be a problem applying it on [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words], or the valves are exactly the same at both [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] types?
 
The valves are the same, I have both the 30 and 40. I can switch them around, the difference is the little switch. The 30 is shorter than the 40. The stopper is always the worst part. You can use the cut piece of tubing as well from any hardware store. You can hold the stopper on the top and just pump, it still works.
 
runningignus;680353 said:
The valves are the same, I have both the 30 and 40. I can switch them around, the difference is the little switch. The 30 is shorter than the 40. The stopper is always the worst part. You can use the cut piece of tubing as well from any hardware store. You can hold the stopper on the top and just pump, it still works.
Click to expand...

Thank you man very much! Golden tips from you. Can't wait to purchase VacuVin, I saw dozens of positive experiences from it. :)
 
Perestroyka;680279 said:
I'll definitely go with a wine vac, cause it's cheap and available in wine stores, but I was lurking around reading about VacuVin stoppers, and guys are talking about they can't get the stopper on valve on their [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words], it's kinda difficult, and many of them keep writing about [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] Cone instead of stopper, unfortunately I have no such cones and I have [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words], would that be a problem applying it on [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words], or the valves are exactly the same at both [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] types?
Click to expand...

Take a look at what I did in the past:

http://www.mattersofsize.com/forum/...se-vacuum-pressure-post630561.html#post630561

Not sure if this is what you're talking about but, popping the valve off the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] and putting the winevac on does wonders. I was having problems fitting mine over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve so, I simply took it off. Once a vacuum is on it, it won't (shouldn't) come off unless you pull it off or release the vacuum. Something worth noting, the winevac I had seemed to fit nice and snug in that hole as well. I can't speak for other brands though.
 
pedud;680500 said:
Take a look at what I did in the past:

http://www.mattersofsize.com/forum/...se-vacuum-pressure-post630561.html#post630561

Not sure if this is what you're talking about but, popping the valve off the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] and putting the winevac on does wonders. I was having problems fitting mine over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve so, I simply took it off. Once a vacuum is on it, it won't (shouldn't) come off unless you pull it off or release the vacuum. Something worth noting, the winevac I had seemed to fit nice and snug in that hole as well. I can't speak for other brands though.
Click to expand...

Thank for the link, I think the visuals are going to help.
 
pedud;680500 said:
Take a look at what I did in the past:

http://www.mattersofsize.com/forum/...se-vacuum-pressure-post630561.html#post630561

Not sure if this is what you're talking about but, popping the valve off the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] and putting the winevac on does wonders. I was having problems fitting mine over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve so, I simply took it off. Once a vacuum is on it, it won't (shouldn't) come off unless you pull it off or release the vacuum. Something worth noting, the winevac I had seemed to fit nice and snug in that hole as well. I can't speak for other brands though.
Click to expand...
How you fill it with water when valve is removed? And how you don't lose vacuum when remove the black latch? I lose vacuum instantly when remove it? This confuses me..
 
Just like normal, just keep your finger pushing the stopper in so it doesn't pop off, fill up and then put on, apply vacuum and your good. Your just replacing the valve with a different valve. That's all.
 
You point it up, and compress the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] once before letting the stopper plug the opening before using the little pump?
 
Your making it seem more complicated lol. Exactly how you normally do it, except there is another valve. My only problem was just to hold the stopper in place while I filled with water. It'll pop off if you just push down, that's why they glued it down. I just used the VacuVin to suck the air out and the vacuum holds it in place. It's hard to explain. That's why I just used my old sleeve on top so I don't need the stopper anymore.
 
Srry bra idk why I even asked that. Hey I was reading up on wine vacs, and not all them have the click. Some of them have bad reviews because the internals separated when over pumping a bottle. Also turns out they don't even work for keeping wine fresher because the oxygen affects it in a way that once you open the bottle its pretty much on a set countdown.

I was thinking about the harbor freight brake bleeder kit which cost the same as some wine vacs, but is industrial quality
 
That's what I used to have. Had the gauge and everything. I got to 19hg a few times for about 10 seconds to see how it was, and yeah, no Bueno lol. Those do work good and last a while. Get one if you can. I'll stick with the wine vac until it breaks and get a hand pump like that again. Just have to rig up a system to use it on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words].
 
runningignus;681540 said:
That's what I used to have. Had the gauge and everything. I got to 19hg a few times for about 10 seconds to see how it was, and yeah, no Bueno lol. Those do work good and last a while. Get one if you can. I'll stick with the wine vac until it breaks and get a hand pump like that again. Just have to rig up a system to use it on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words].
Click to expand...

So you are using the rubber ball now? I guess I am lost here.
 
doublelongdaddy;681541 said:
So you are using the rubber ball now? I guess I am lost here.
Click to expand...

No, templnite has the extreme, I have the regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]. We're talking about the max from the wine vac VS the rubber ball. He's deciding if he wants to get the harbor freight hand pump with gauge.
 
runningignus;681543 said:
No, templnite has the extreme, I have the regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]. We're talking about the max from the wine vac VS the rubber ball. He's deciding if he wants to get the harbor freight hand pump with gauge.
Click to expand...

I got you, sorry for the ignorant question. :)
 
Perestroyka;681483 said:
How you fill it with water when valve is removed? And how you don't lose vacuum when remove the black latch? I lose vacuum instantly when remove it? This confuses me..
Click to expand...

At no point will you ever remove the valve while using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]. In the first pic, the valve from the winevac is attached. Just hold the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] along with the valve in one hand and fill it up with the other. With water in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] and against your body, you can start pumping with the winevac with no problems. Hope that makes sense.
 
You must log in or register to reply here.
Back
Top