I'm really shooting for girth around 1/2 inch I'm currently 5 inches and would like to get to 5.5 MEG. I've seen wearing a cock ring after sessions is good for keeping improving girth I have a few questions...

1) Like the title says is there a recommended cock ring?

2) How long do you wear it for after a session?
 
Rubber o-rings are good for the guy on a budget. If you can spend $20- $30, get a good quality silicone ring. The type I suggest is 1/2" wide, about 1/4" thick.

They last forever, won't tear.

Measuring guides can be found online. The diameter goes by the inside of the ring and is usually in millimeters. Some easy Google searches for mm to inch conversion and you have your ring size. It's best to go slightly smaller than you think you'll need. I also prefer a ring that goes around the whole package vs just the shaft. Stays on better.
 
I personally got several cockrings. (Have been meaning to do a thread on them ...)

Anyhow, Stillwantmore's tip is spot on in my opinion. Silicone ones are good. Definitely look for some width in the cockring.
After a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] session I usually wear a halved Doc Johnson cockcage ring. Mine have lasted quite well.
Other good option is Tantus Super Soft C Ring, also written about on this forum.

I would like to try the Horseshoe cockring, but so far the cost of one has put me down. However, on the pricier range I acquired myself Jnaja by Velv'Or. It's a whole package deal cockring.
There's one problem that's the same with Horseshoe cockring; the sizing. So, get your measurements right if you go for either one of those. (Or cockrings that are metal / non-stretching material.)

Oxballs also offers some nice cockrings, like Powerballs for example.

Lots of choices out there. The O-rings work as well, if you're really on a budget. I actually bought a box of different sized ones. With O-rings, as 2slow mentioned, width is to be taken into consideration. Most of O-rings available are on the thinner side, so they're a bit rough while they do work. Hairbands as mentioned, also work, just be sure to get one without a metal "hook" in the band. That rule should go for all hairbands though, that metal in the bands does damage to the hair.
 
Big Schwanz Acht;721283 said:
I just use a cheapo hair-tie and usually keep it on for a few hours after a session

This very much. It also helps using the same one advised by big schwanz for boa constrictor method in case you want to grow your head.
 
kyomoto;721308 said:
This very much. It also helps using the same one advised by big schwanz for boa constrictor method in case you want to grow your head.[/QUOTE]

Again talking about shit you know nothing about and confirmed by the fact you have the smallest glans in [words=http://www.mattersofsize.com/join-now.html]mos[/words]. You can't even use your [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] because of it.
If you wanna target shaft you cut off the head like in [words=http://www.mattersofsize.com/forum/penis-enlargement-forum/12539-slow-squash-jelq-nothing-give-me-better-expansion.html]ssj[/words], if you want cs/glans growth you leave that part open like in stilly's clamped wall press or ulis ,erect jelqs

Ark make that thread
 
Last edited:
templnite;721315 said:
kyomoto;721308 said:
This very much. It also helps using the same one advised by big schwanz for boa constrictor method in case you want to grow your head.[/QUOTE]

Again talking about shit you know nothing about and confirmed by the fact you have the smallest glans in [words=http://www.mattersofsize.com/join-now.html]mos[/words]. You can't even use your [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] because of it.
If you wanna target shaft you cut off the head like in [words=http://www.mattersofsize.com/forum/penis-enlargement-forum/12539-slow-squash-jelq-nothing-give-me-better-expansion.html]ssj[/words], if you want cs/glans growth you leave that part open like in stilly's clamped wall press or ulis ,erect jelqs

Ark make that thread

I'm still in the testing phase of this :) heard uli's probably best option but dunno about [words=http://www.mattersofsize.com/forum/penis-enlargement-forum/12539-slow-squash-jelq-nothing-give-me-better-expansion.html]ssj[/words]
 
iwant7;721281 said:
I'm really shooting for girth around 1/2 inch I'm currently 5 inches and would like to get to 5.5 MEG. I've seen wearing a cock ring after sessions is good for keeping improving girth I have a few questions...

1) Like the title says is there a recommended cock ring?

2) How long do you wear it for after a session?

I have the Horseshoe cockring. The DuraGage Magnum to be exact. It is the best. I have made alot of gains from it. I usually keep it on for about 10 minutes after a session. Take it off then flex my PC for about 20 min to keep it strong.
 
arkailija;721304 said:
I personally got several cockrings. (Have been meaning to do a thread on them ...)

Anyhow, Stillwantmore's tip is spot on in my opinion. Silicone ones are good. Definitely look for some width in the cockring.
After a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] session I usually wear a halved Doc Johnson cockcage ring. Mine have lasted quite well.
Other good option is Tantus Super Soft C Ring, also written about on this forum.

I would like to try the Horseshoe cockring, but so far the cost of one has put me down. However, on the pricier range I acquired myself Jnaja by Velv'Or. It's a whole package deal cockring.
There's one problem that's the same with Horseshoe cockring; the sizing. So, get your measurements right if you go for either one of those. (Or cockrings that are metal / non-stretching material.)

Oxballs also offers some nice cockrings, like Powerballs for example.

Lots of choices out there. The O-rings work as well, if you're really on a budget. I actually bought a box of different sized ones. With O-rings, as 2slow mentioned, width is to be taken into consideration. Most of O-rings available are on the thinner side, so they're a bit rough while they do work. Hairbands as mentioned, also work, just be sure to get one without a metal "hook" in the band. That rule should go for all hairbands though, that metal in the bands does damage to the hair.

I'm using the Tantus Super Soft C Ring, it is very durable.
 
Bro I'm using this cable tie its good for keeping elongated as well as engorged and can be used with or without [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ujw[/words] and is so fun to play with https://www.walmart.com/ip/NITE-IZE-GT6-2PK-01-Gear-Tie-6-In-Black/40790580 just wrap a few of them around your painus and the scrote and its better than that clunky thing "supras stealth [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]forte[/words]" which costs about a rack

Blus that thing girth said ain't even a thing, ask him for a time stamp before putting your health at risk with imaginary products
 
Last edited:
2slow;721294 said:
Thats why i like the horseshoe ring it goes around your whole pckage. And when you get used to it its like wearing jewelry. 😆. A good one is pricy but worth the money. I believe i paid 75$ for mine.

its a foreign object your body's not supposed to like it. I guess for your freaky body is different though slowex/daniel so I guess all the bullshark testosterone really paid off
 
stillwantmore2;721293 said:
Rubber o-rings are good for the guy on a budget. If you can spend $20- $30, get a good quality silicone ring. The type I suggest is 1/2" wide, about 1/4" thick.

They last forever, won't tear.

Measuring guides can be found online. The diameter goes by the inside of the ring and is usually in millimeters. Some easy Google searches for mm to inch conversion and you have your ring size. It's best to go slightly smaller than you think you'll need. I also prefer a ring that goes around the whole package vs just the shaft. Stays on better.

But did you gain from it?
 
2slow;721555 said:
Wow, your a real clown arnt you! You must really hate yourself..dont ride my dick im not gay and this ride isnt free!

This denotes gay for pay then
 
Ox ball rings are pretty nice! I was looking for my reply on this thread and behold; I actually made a short "review" on some cockrings!
http://www.mattersofsize.com/forum/penis-enlargement-products-and-reviews/89253-my-view-on-several-cockrings.html

I haven't used my Tantus in a while, the cockcage thing is my go-to nowadays, as I usually use that as paddng for cable clamp. Quick and "dirty", not as sophisticated as SWM's clamp, but I'm lazy at times (read; all the time), so getting somekind of a session on is a win.

From Oxballs the Powerballs are quite nice. One of mine is quite ripped, but still holds up. I'd acquire a few if the price isn't an issue. At least they're not horse shoe priced! :-D
I'm still in a process / mindplay of making a ring myself, but I don't have too many tools to work with metal in the finesse it would require to create a nice cockring.
And silicone compounds etc., are so expensive over here, otherwise I would consider sculpting a mold from ceramic, wood or something easily mallable and pouring the silicone mixture in. Truly made-to-fit! But just an idea for now ...
 
$2 for a pack and they work a charm!
b3ddf720-a37d-466e-8f53-558c6dfa7708_1.a576943f86938a38a1475bb1012cba2d.jpeg
 
doublelongdaddy;759485 said:
$2 for a pack and they work a charm!
b3ddf720-a37d-466e-8f53-558c6dfa7708_1.a576943f86938a38a1475bb1012cba2d.jpeg

Well, I've already copied the URL of this thread and saved it in my email until when I'm ready to buy cock rings for girth. I will be buying as much as possible, different brands in packs
 
huge-girth;759551 said:
Well, I've already copied the URL of this thread and saved it in my email until when I'm ready to buy cock rings for girth. I will be buying as much as possible, different brands in packs

One pack should last the rest of your life :) There are 28 in a pack! And a pack costs $2 or less.
 
doublelongdaddy;760374 said:
One pack should last the rest of your life :) There are 28 in a pack! And a pack costs $2 or less.

I hope they are tight enough? I will be needing them
 
huge-girth;760493 said:
I hope they are tight enough? I will be needing them

You can make them as tight as you like by simply doubling them up.
 
I would simply buy from time to time. Some products do have a good shelf-life but others don't, rubber in those bands could deteriorate with time even with proper storage conditions. (Think of an old rubber band that crumbles when stretched!)

Those hair bands and O-rings are simple and effective. For "sexy times" I would probably choose something else. While hairbands and O-rings are effective, they can be quite utilitarian and not so sexy.
Clear silicone O-rings would be the best in my opinion, in the sense of being practical but also not no utilitarian perhaps, as it could pretty much be "invisible." The main concern with a silicone O-ring would be the composition of the ring, as in how ridig and pliable it is, as silicone can rip easily if the composition is very flexible. One could take a TPR cockring in same dimensions and softness as silicone and the silicone might be more prone to ripping. Just a small viewpoint, there are different variety of products out there and some are better, some are not so great.
 
arkailija;760932 said:
I would simply buy from time to time. Some products do have a good shelf-life but others don't, rubber in those bands could deteriorate with time even with proper storage conditions. (Think of an old rubber band that crumbles when stretched!)

Those hair bands and O-rings are simple and effective. For "sexy times" I would probably choose something else. While hairbands and O-rings are effective, they can be quite utilitarian and not so sexy.
Clear silicone O-rings would be the best in my opinion, in the sense of being practical but also not no utilitarian perhaps, as it could pretty much be "invisible." The main concern with a silicone O-ring would be the composition of the ring, as in how ridig and pliable it is, as silicone can rip easily if the composition is very flexible. One could take a TPR cockring in same dimensions and softness as silicone and the silicone might be more prone to ripping. Just a small viewpoint, there are different variety of products out there and some are better, some are not so great.

You do have a point though. I have also noticed that the longer you keep a cock ring, the more likely for it to deteriorate. Can you show me what a clear silicone O-ring looks like?
 
attachment.php


Just a quick Google search. O-ring, but in silicone and clear; always opt for some width and rigidness when getting a silicone rings.
 
arkailija;760977 said:
attachment.php


Just a quick Google search. O-ring, but in silicone and clear; always opt for some width and rigidness when getting a silicone rings.

This one look great. There is one other one recommended by DLD. It's very cheap, I think $2 for a pack.
 
huge-girth;761006 said:
This one look great. There is one other one recommended by DLD. It's very cheap, I think $2 for a pack.

Love these!
 
I'm really shooting for girth around 1/2 inch I'm currently 5 inches and would like to get to 5.5 MEG. I've seen wearing a cock ring after sessions is good for keeping improving girth I have a few questions...

1) Like the title says is there a recommended cock ring?

2) How long do you wear it for after a session?


Longest time brother.
 
Back
Top