Bathmate and Rings at Base

[tcssmos]

Does anyone get white rings or ring indentions after use of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]? If so is it a sign to go up to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]? I read the statement below from a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] manual posted online but wanted to find out if the end statement is something people are abiding by.

NOTE: We recommend using the unit as often as once a day, and no less than 3 times a week for the best results.
You should only use [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]® for a maximum of 15 to 20 minutes per session. When maximum girth growth is reached, ring marks may appear at the base of the penis, indicating a model size increase. Please use this product sensibly.

 

[tcssmos]

Hi,

yes - if you have rings marks and have maxxed out in girth then you need to go up to a bigger size which is currently the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] version

best regards

Tim @ [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] HQ

Thanks Tim. The only issue is I just purchased the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] about 3 weeks ago. When you say "maxed out does that mean I have to fill the tube or does it mean that I am maxed out if I have the rings? The reason I ask is because I currently hit about 195-200mm on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] so there is still room. Concerning girth towards the middle and head of the penis there is still some visible room. My base girth is larger than my middle and head girth.

So would you still say that I've maxed out this model or would you say I still have some growing room and need to fill it up?

Also anyone else with this experience?

 

[sizerp]

I am in the same boat, I've had my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] for about 2 months and now it gets stuck on my dick when I try to release it. It hurts like a bitch for a few seconds when I take it off, like someone glued the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to my cock!

Is there some kind of exchange policy or size upgrade package for guys like us who need the larger version [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]?

 

[tcssmos]

Yeah wondering the same thing. But also wondering if we are supposed to grin and bare it until we actually fill it or if we are supposed to move up in size.

 

[sizerp]

Yeah wondering the same thing. But also wondering if we are supposed to grin and bare it until we actually fill it or if we are supposed to move up in size.

Well, I assumed we already did "fill it" if we're experiencing this. Do you mean like fill it with natural girth? I think that kind of defeats the purpose. We need to expand beyond natural girth to help grow, right?

I am exactly 5.9" when I come out of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], and if I clamp or [words=http://www.mattersofsize.com/forum/penis-enlargement-forum/12539-slow-squash-jelq-nothing-give-me-better-expansion.html]SSJ[/words] afterward I am 6"+ mid-shaft and base-girth. I am excited to see how much I can gain with more room the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] provides.

 

[DLD]

If you are having to pull it off like that you certainly need to move into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. If you fear it will be too large, don't, it will be much more comfortable and you will no longer experience that white ring soreness.

 

[tcssmos]

Well, I assumed we already did "fill it" if we're experiencing this. Do you mean like fill it with natural girth? I think that kind of defeats the purpose. We need to expand beyond natural girth to help grow, right?

I am exactly 5.9" when I come out of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], and if I clamp or [words=http://www.mattersofsize.com/forum/penis-enlargement-forum/12539-slow-squash-jelq-nothing-give-me-better-expansion.html]SSJ[/words] afterward I am 6"+ mid-shaft and base-girth. I am excited to see how much I can gain with more room the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] provides.

You would think right but check out the thread below for what I mean. Take a look at the pictures St. John provided. That's what I mean by filling the tube. No water appears to be left on either any side the whole way up the shaft. When I wear the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] there is still some space left with water mid shaft and to the head, but the base of the shaft hurts like hell and has rings. So what I was asking is if this (the thread below) is the level we need to achieve prior to moving up in size?

http://www.mattersofsize.com/forum/...-Rings-at-Base&p=417739&highlight=#post417739

 

[tcssmos]

If you are having to pull it off like that you certainly need to move into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. If you fear it will be too large, don't, it will be much more comfortable and you will no longer experience that white ring soreness.

Thanks DLD. Probably will just go ahead and get a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] anyway. I posted St. Johns "filling the tube" to see if that's what where we needed to be. I am not there yet but still experience the rings and pain due to base girth. I've been reaching the 195-200mm mark consistently so maybe it's just time anyway.

 

[stretcharmstrng]

hey guys, i gotta tell you- i own the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model and am still experiencing this same issue. and no, i am not at 8" girth, but the skin at the base is the first thing to expand because it is closest to the actual suction mechanism. im beginning to think maybe it IS a design issue, the 'ideas for future [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] releases' thread discusses this very problem.
not sure if some foam rings( cut to fit) can be inserted in between each fold of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] on the inside to prevent the skin from getting sucked in, that might affect the suction or seal. or maybe wrapping the base with a piece of cloth would help, but not too tight, so there is room for expansion.

i've actually been using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] in the bath, as opposed to my usual outside on a chair. i think the hot water helps to keep the skin moist and the testicles loose( to be pulled down and out of the way), i wonder if the other guys experiencing this issue use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] in or out of the bath? Alex? cheers

 

[sizerp]

One thing I need to ask - you said outside on a chair.. you mean outside your bathroom and not on your porch right? hehehe

best regards

Tim @ [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] HQ

Hahaha!

 

[Alex78]

hey guys, i gotta tell you- i own the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model and am still experiencing this same issue. and no, i am not at 8" girth, but the skin at the base is the first thing to expand because it is closest to the actual suction mechanism. im beginning to think maybe it IS a design issue, the 'ideas for future [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] releases' thread discusses this very problem.
not sure if some foam rings( cut to fit) can be inserted in between each fold of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] on the inside to prevent the skin from getting sucked in, that might affect the suction or seal. or maybe wrapping the base with a piece of cloth would help, but not too tight, so there is room for expansion.

i've actually been using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] in the bath, as opposed to my usual outside on a chair. i think the hot water helps to keep the skin moist and the testicles loose( to be pulled down and out of the way), i wonder if the other guys experiencing this issue use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] in or out of the bath? Alex? cheers

can you please measure the size of the opening?
How much cm?

 

[sizerp]

can you please measure the size of the opening?
How much cm?

http://Bathmate.com/X-40.php

 

[tcssmos]

Thanks everyone, I appreciate the feedback. I think I'll stick out out for a bit unless it become unbearable.

 

[kport11]

so yesterday i got some self grip [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words],,i cut a piece as to have enough to lightly wrap around my shaft,,i kinda let the flang up onto my base a little, i then pump as usual,,it actually work for me,,there was very little impreesions if any,,i have done this twice now and so far seems to be working,,i am a bit bumbed though for the design should really have been corrected before the realease of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words],,,just my two cents, i am hoping know one takes to much offense to me saying that but its the truth,,,tks everyone, for all your help

 

[Alex78]

http://Bathmate.com/X-40.php

Width: 24Ø min / 84Ø max 24Ø min / 115Ø max

What is this, i measured my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] opening at 5.6mm, where can i get exact measurements not outside ones?

 

[Alex78]

delete this one...a mistake--

 

[DLD]

Width: 24Ø min / 84Ø max 24Ø min / 115Ø max

What is this, i measured my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] opening at 5.6mm, where can i get exact measurements not outside ones?

Watch THIS VIDEO I made on size differences.

 

[kport11]

Hello there,,i just noticed that Tim is banned,,,Why? What happened? Maybe none of my business...just wondering is all,,