Budget Penimaster Pro Extender option for 1/2 the price

I previously posted that you can buy just the basic parts to the Penimaster Pro for $100 or less to put simple ADS device together. If you want to use it with a rod and spring extender device, that can be done very easily and cheaply too. To order the basic kit from Penimaster will cost you $285. If you are on a budget you can get started for about $140 doing this... Here is the link to my original post to get the basic parts:

http://www.mattersofsize.com/forum/showthread.php?65239-Penimaster-pro&p=469995#post469995

Buy the basic stuff for $100. Then you can get an extender from eBay for $20 to $40. The one shown in the pic is a "Hybrid" $40 extender that uses either the silicone loop or a strap. Add to that an 8" zip tie that goes through the holes for the silicone tube and over the Penimaster and you have a rod and spring type Penimaster Pro extender for 1/2 the price. The PeniMaster extender is going to be much better quality but for those that are short on cash, this is a solution to get you started for less.

Excellent post!

Thanks. This is just the quicky way to get it working. It would not be too hard to make an attachment that connects from the tip as does the factory unit. But I'm short on time now to build that. When I do I'll post the info. Another option is to use a reusable zip tie. I'll probably buy a couple of those so I can quickly take it off the extender base for when I am going to use the PM Pro with an elastic leg strap under my clothes. I'm still experimenting on what works best for me. Around the house when I am alone I think I prefer the extender. However, out in public I use an elastic with a leg strap as it hides very well under clothing while the extender does not.

I've also changed to a plug for the hose vs the aquarium one way valve. There wasn't really much point using the one way value. I used the tip of some headphones that died for the plug. It's recommended that you blow some air into the PM Pro before you put against you penis to eliminate extra air in the unit. With the one way value you need to pull it off to blow into the unit so it was more of a hassle than a benefit to use it. Plug works fine.

BTW, not shown in the pic but you need to put a sheet of silicone wrap or something else between the PM Pro and the cradle to prevent the latex part from prematurely tearing where it touches the cradle.

I'm doing this mod to my male edge I just got. There a lot of good things about the male edge I like, but the width of the bars don't line up with the penis master pro mod. I like the design on the male edge. Its light weight no bars to add more comfortable base super high tension rate 2800 grams and it has a see through plastic to read tension level making it super easy to see we're you tension is in any angle.

I found this site to order re usable cable ties as it is too much of a pain in the ass to keep cutting of the cable ties every time I need to put the penis master pro mod back on.

Here is the link for anyone who likes this idea but doesn't like to keep cutting off the cable tie also I am putting the cable tie through a tubing I got from auto extender, so it doesn't rub on the rubber sleeves on the pro.

so this might also help people getting slippage who are using the noose to secure the penis to the extender. With regular cable ties they lock and must be cut off so not good way to fasten the penis to extender but with the quick release it could be a perfect fix or those using old method.

http://www.cabletiesandmore.com/ame...cable-ties-trigger-style-pack-black-p-640.php