Silistretcher vs Stealth Stretcher?

[thedudefather]

Definitely start again with the LengthMaster as there is no faster way to length. God bless you on your journey

Thanks to both of you for the input and support. Just been a bumpy stretch lately but will smooth out soon enough. Once May 1st hits, it's back to business.

 

[DLD]

Thanks to both of you for the input and support. Just been a bumpy stretch lately but will smooth out soon enough. Once May 1st hits, it's back to business.

About one month. I am so looking forward to your training. God bless you!

 

[kriskros]

This is why most of us who are always understresses tend to get less gains, or no gains, until we find a destressing point. This is @kriskros arena as well. He was so stressed on getting gains that the cortisol went ballistic. Once he decided to quit, his body was able to relax to some degrees and the decreased cortisol level helped the other hormones to rebound. That's why during stressful time, continue with PE just to maintain, the gains will still be there, but the visual of the gains won't manifest because of cortisol loading dominating the other beneficial hormones meant to gain. if you haven't noticed, your EQ probably took a large hit as well, as much as 30% reduction of quality.

I testify for this. 100% truth guys

 

[DLD]

000 came through again. Oldandlively is the real deal truth sayer. Thank the Lord he is our brother

 

[thedudefather]

I broke down and ordered the silistretcher on payment plan

I'm determined to hit my goals this year.

 

[DLD]

I broke down and ordered the silistretcher on payment plan

I'm determined to hit my goals this year.

There is a payment plan?

 

[oldandlively]

There is a payment plan?

Personal credit card my brother.

 

[DLD]

Personal credit card my brother.

Wonder if we should have a payment plan?

 

[thedudefather]

There is a payment plan?

Yeah its with Klarna, available in the shop

 

[DLD]

Yeah its with Klarna, available in the shop

That is awesome, we need to advertise this more effectively.

 

[thedudefather]

SiliStretcher is due to arrive on Friday.

Is the whole "1k hours = 1 inch" thing accurate? Or is it more a matter of intensity?

 

[oldandlively]

SiliStretcher is due to arrive on Friday.

Is the whole "1k hours = 1 inch" thing accurate? Or is it more a matter of intensity?

It's a calculated average model of at least 5000 PE-ers' gain data analysis

 

[thedudefather]

It's a calculated average model of at least 5000 PE-ers' gain data analysis

So by that metric, if I wear it for at least 8hrs/day 5x/week then I'll hit an inch in about 6 months-ish?

Given, I'll be doing LM sessions beforehand

 

[oldandlively]

So by that metric, if I wear it for at least 8hrs/day 5x/week then I'll hit an inch in about 6 months-ish?

Given, I'll be doing LM sessions beforehand

By using the LM before hand, you do cut it down by around 3 to 4 hours of initial wear time. Yes, by that logical metric, 8 hours of wearing per day can provide that projected gain. However, reality may invoke some fundamental universal laws that we cannot foresee at this moment. We can only assess after 3 months of initial usage and again at 6 months. Once we determine where your DNA is playing its resistant cards, we can counter them with something else. You probably experience it now. A few of our brothers are experiencing it right now. Some brothers just broke the freaking molds and grew like bamboos.

So, one evaluation step at a time and we'll change a predictive model for you. BUT, always know that your penis does grow at least 1mm each day of PE.

 

[thedudefather]

By using the LM before hand, you do cut it down by around 3 to 4 hours of initial wear time. Yes, by that logical metric, 8 hours of wearing per day can provide that projected gain. However, reality may invoke some fundamental universal laws that we cannot foresee at this moment. We can only assess after 3 months of initial usage and again at 6 months. Once we determine where your DNA is playing its resistant cards, we can counter them with something else. You probably experience it now. A few of our brothers are experiencing it right now. Some brothers just broke the freaking molds and grew like bamboos.

So, one evaluation step at a time and we'll change a predictive model for you. BUT, always know that your penis does grow at least 1mm each day of PE.

Understood. I'm actually taking this week off as I prepare to change jobs and receive my silistretcher.

 

[oldandlively]

Speaking of the SS, make sure to have a bit of experimental time with it. Things to know:

• Make sure to use the TheraBand to wrap around the base of the glans for better traction and pressure retention.
• DO NOT turn more than 1/2 turn. That's already at -4inHg in a good vacuum. You bend over, or accidentally yank on the vacuum cup while under pressure, you can push the pressure well past -7inHg. If you're using a full rotation, that's -7inHg, and you'll go past -10inHg. Blister city.
• Don't use the caps. Just place a toilet tissues at the very top of the cup to wick moisture and urine. Yep, urine. Pressure will pull the urine in the urethra into the cup. Alkaline condition will weaken your glans' dermal layer and the blister will form when you wear it long hours.
• Shove that glans way, way, way up into the cup. If you need the post about the SS, let us know. Plenty of photos and diagrams for you to use as reference.

 

[thedudefather]

Speaking of the SS, make sure to have a bit of experimental time with it. Things to know:

• Make sure to use the TheraBand to wrap around the base of the glans for better traction and pressure retention.
• DO NOT turn more than 1/2 turn. That's already at -4inHg in a good vacuum. You bend over, or accidentally yank on the vacuum cup while under pressure, you can push the pressure well past -7inHg. If you're using a full rotation, that's -7inHg, and you'll go past -10inHg. Blister city.
• Don't use the caps. Just place a toilet tissues at the very top of the cup to wick moisture and urine. Yep, urine. Pressure will pull the urine in the urethra into the cup. Alkaline condition will weaken your glans' dermal layer and the blister will form when you wear it long hours.
• Shove that glans way, way, way up into the cup. If you need the post about the SS, let us know. Plenty of photos and diagrams for you to use as reference.

Got it. Yeah, I've been reading everything i can about it while I wait.

 

[DLD]

Got it. Yeah, I've been reading everything i can about it while I wait.

Have you read SRT?

 

[thedudefather]

Have you read SRT?

I have, and i plan on reading it again.

There's also a post you made about a hardcore silistretcher routine that I really liked and am going to implement once I'm comfortable with it.

 

[DLD]

I have, and i plan on reading it again.

There's also a post you made about a hardcore silistretcher routine that I really liked and am going to implement once I'm comfortable with it.

Awesome nothing better than SRT!

 

[thedudefather]

Awesome nothing better than SRT!

My silistretcher showed up 2 days early!

Time to figure out this thing before trying it on.

 

[thedudefather]

How does this look on first attempt? It's got enough tension to pull but not a taut pull.

Haven't done any workouts, just trying to get it figured out properly.

Any and all advice welcome and appreciated

 

[oldandlively]

Suggestion, shift the contact point over of the SiliStretcher over the knee if you're sitting. It will create a constant tension of 1.1 to 1.3kg without slacking. When you walk, that's the strapping position you want. Why? You bend over, and holy smoke! The traction pressure inside the cup goes past the set up pressure by 3 folds. Blister city.

 

[thedudefather]

Suggestion, shift the contact point over of the SiliStretcher over the knee if you're sitting. It will create a constant tension of 1.1 to 1.3kg without slacking. When you walk, that's the strapping position you want. Why? You bend over, and holy smoke! The traction pressure inside the cup goes past the set up pressure by 3 folds. Blister city.

I will definitely do that. New job has me working from home more often so that's going to be great.

So far, what i love about it is the lack of trying to retract, basically forcing you to stay elongated. I think this is going to be the plateau breaker I've been needing.

 

[oldandlively]

Just an insight, if you want bundled stretching to break the plateau further, before you strap onto the knee wrap, rotate your penis. The amount of tension on the tunica will increase for the same amount of stretch length. Make sure to switch to the other direction for an equal amount of time.

Just a warning, if you are going about, be ready to get stared at by ladies, especially the older ones. Some will lick their lips. Personally experienced this many times over. Younger ones will simply giggle with each other.

 

[thedudefather]

Just an insight, if you want bundled stretching to break the plateau further, before you strap onto the knee wrap, rotate your penis. The amount of tension on the tunica will increase for the same amount of stretch length. Make sure to switch to the other direction for an equal amount of time.

Just a warning, if you are going about, be ready to get stared at by ladies, especially the older ones. Some will lick their lips. Personally experienced this many times over. Younger ones will simply giggle with each other.

Bundling with this thing.... hoo boy that's gonna create a lot of length

And I used to get looks last year when I'd wear my sleeves in public, but this? Can't wait to see the reactions haha

 

[oldandlively]

Before I forget, to prevent the sleeve from kinking/folding where the cap's edge and the coronal ridge is, use a TheraBand or something similar to create a gap filler, provide additional seal, and increase traction for your glans even further. This reduces the stress load on the sleeve and stop it from ripping apart under stress. In due time, the sleeve will wear out. Keep the old stretched out sleeve and put it over the new one, essentially doubling the layer to hold onto the cup and the base of the glans. The double layers will slow down stretching even further by as much as 80%. Too much experimentation on my end at this point.

Also, make sure to keep an eye out on the upper portion of the cap. Moisture will build up over time, and the maintenance is required for the cap. See here:

Thread 'How to remove cylinder head for maintenance?'

Feb 17, 2024

Just wondering how the brothers prevent the rust from occuring for the seat rings at the top? Rust starts to form around the seating c-clamp ring and washer at the top and making a mess. I can't figure a way to remove the sealing cap (the one with the o-rings) to clean the seating c-clamp and washer.

Beside that, how to apply the silicone on the o-rings and not the side of the chamber? Applying the food grade silicone on the cylinder wall simply get it wiped away.

• oldandlively
• Replies: 16
• Forum: SiliStretcher Vacuum Penis Stretcher Forum

 

[thedudefather]

Before I forget, to prevent the sleeve from kinking/folding where the cap's edge and the coronal ridge is, use a TheraBand or something similar to create a gap filler, provide additional seal, and increase traction for your glans even further. This reduces the stress load on the sleeve and stop it from ripping apart under stress. In due time, the sleeve will wear out. Keep the old stretched out sleeve and put it over the new one, essentially doubling the layer to hold onto the cup and the base of the glans. The double layers will slow down stretching even further by as much as 80%. Too much experimentation on my end at this point.

Also, make sure to keep an eye out on the upper portion of the cap. Moisture will build up over time, and the maintenance is required for the cap. See here:

Thread 'How to remove cylinder head for maintenance?'

Feb 17, 2024

Just wondering how the brothers prevent the rust from occuring for the seat rings at the top? Rust starts to form around the seating c-clamp ring and washer at the top and making a mess. I can't figure a way to remove the sealing cap (the one with the o-rings) to clean the seating c-clamp and washer.

Beside that, how to apply the silicone on the o-rings and not the side of the chamber? Applying the food grade silicone on the cylinder wall simply get it wiped away.

• oldandlively
• Replies: 16
• Forum: SiliStretcher Vacuum Penis Stretcher Forum

I'll have to get some because the SiliStretcher didn't come with any theraband. But thank you for the tip

 

[oldandlively]

I'll have to get some because the SiliStretcher didn't come with any theraband. But thank you for the tip

Very cheap stuff you can get online, be TheraBand or alternative. I have 60 feet of the spool and I use it practically for everything. I mean everything!

 

[thedudefather]

Very cheap stuff you can get online, be TheraBand or alternative. I have 60 feet of the spool and I use it practically for everything. I mean everything!

Don't think I'll need 60ft of it but I will be ordering some shortly.

 

[oldandlively]

Don't think I'll need 60ft of it but I will be ordering some shortly.

I don't know. You can get pretty kinky with that extra length

 

[thedudefather]

I don't know. You can get pretty kinky with that extra length

Well considering I'm still in a long term relationship with Palm-ela Handerson

 

[oldandlively]

Well considering I'm still in a long term relationship with Palm-ela Handerson

Hey now, Palm-ela Rightecia may be getting major jealous vibes from the twin, Palm-ela Lefticilla, if they don't get equal amount of attentions. Kinky plays for one while the other gets the action.

 

[thedudefather]

Hey now, Palm-ela Rightecia may be getting major jealous vibes from the twin, Palm-ela Lefticilla, if they don't get equal amount of attentions. Kinky plays for one while the other gets the action.

Once I get this thing going, there will be room enough for both

 

[DLD]

Very cheap stuff you can get online, be TheraBand or alternative. I have 60 feet of the spool and I use it practically for everything. I mean everything!

The problem with that is you don't know how there made. For instance you can buy sleeves from Amazon but the chance of getting a product that is reliable you are simply wasting your money. if you buy from us you know you are getting the real deal.

 

[thedudefather]

The problem with that is you don't know how there made. For instance you can buy sleeves from Amazon but the chance of getting a product that is reliable you are simply wasting your money. if you buy from us you know you are getting the real deal.

Always and forever buying here. Everything has been quality. Excited to start training with my silistretcher.

 

[thedudefather]

I should have bought this a long time ago. The constant pull feels amazing. Going to start with 4hrs/day and work up to 8.

 

[oldandlively]

I should have bought this a long time ago. The constant pull feels amazing. Going to start with 4hrs/day and work up to 8.

Exactly! Most of PE-ers don't use extender or all day stretcher after the LM routine. The amount of low traction tension is phenomenal to break out of specific plateau or to boost the growth.

Wish we can have various add-ons in the MOS Shop for the SiliStretcher and MityVac. But, one step at a time as the those add-ons can get pricey.

 

[thedudefather]

Exactly! Most of PE-ers don't use extender or all day stretcher after the LM routine. The amount of low traction tension is phenomenal to break out of specific plateau or to boost the growth.

Wish we can have various add-ons in the MOS Shop for the SiliStretcher and MityVac. But, one step at a time as the those add-ons can get pricey.

The biggest thing I've always noticed is that even with a #5 sleeve the retraction makes it bulge in certain spots. After 4hrs of the SiliStretcher I'm getting zero retraction.

This is really going to supercharge my gains for sure.

 

[oldandlively]

The biggest thing I've always noticed is that even with a #5 sleeve the retraction makes it bulge in certain spots. After 4hrs of the SiliStretcher I'm getting zero retraction.

Ah! You discovered the retractive fighting. When you don't add a start end and a resisting end for the sleeve, say the starting end is the base of the glans, and the resisting end is somewhere along the penis or against the base, your tunica will fight like a banshee to retract. This is why there must be be two ends. I like the cold days since I can add a layer of flexible bandate over the sleeve against my base to keep it elongated and warm at the same time. During hot day, even my penis sweats.

This is really going to supercharge my gains for sure.

Keep it up brother. Make sure not to measure the penis and only observe visually. Allow the mind and body to remain relaxed from all the constantly worries on the gains.

Again, don't turn the knob past 3/4 turn. Accidental high pressure can cause blister wearing that monster of a device.

 

[thedudefather]

Ah! You discovered the retractive fighting. When you don't add a start end and a resisting end for the sleeve, say the starting end is the base of the glans, and the resisting end is somewhere along the penis or against the base, your tunica will fight like a banshee to retract. This is why there must be be two ends. I like the cold days since I can add a layer of flexible bandate over the sleeve against my base to keep it elongated and warm at the same time. During hot day, even my penis sweats.



Keep it up brother. Make sure not to measure the penis and only observe visually. Allow the mind and body to remain relaxed from all the constantly worries on the gains.

Again, don't turn the knob past 3/4 turn. Accidental high pressure can cause blister wearing that monster of a device.

I had it around 3/4 turn for most of the time but released a tiny bit of pressure to make it a little more comfy. But yeah I'm going with 1/2 to 3/4 turn and no more.

And no measuring until the fall because I want to make sure it's actual growth and not just eq improvements.

 

[DLD]

I had it around 3/4 turn for most of the time but released a tiny bit of pressure to make it a little more comfy. But yeah I'm going with 1/2 to 3/4 turn and no more.

And no measuring until the fall because I want to make sure it's actual growth and not just eq improvements.

If you go 1 month after you reached your goal you know that the gains. I agree with your measure technique. I rarely measured as I knew gains would not be there measuring too much.

 

[thedudefather]

If you go 1 month after you reached your goal you know that the gains. I agree with your measure technique. I rarely measured as I knew gains would not be there measuring too much.

I'll be hitting my goal sooner than I thought with the SiliStretcher, I already know

 

[ComradeImprover2]

Damn, didn’t even know such a place existed, maybe I’ll check out bumble in the future then as I’m all for quality women. I just can’t sleep with women whom I don’t find attractive anymore.

hey it's been a while would you consider going overseas? I know you are muslim? Would you date women from Iran? Or Turkery? I hear they have beautiful women and of course if you are willing to pay a dowry why not.

 

[Txgulf]

on the silistretcher, do you stick your head all way in there ?

 

[thedudefather]

on the silistretcher, do you stick your head all way in there ?

Yeah, just jam it in there, roll the sleeve from the cup down your shaft to create the seal, and then 1/2 to 3/4 turn to create the vacuum.

I suppose I could try to take a quick video tomorrow when I'm putting it on.

 

[Txgulf]

Yeah, just jam it in there, roll the sleeve from the cup down your shaft to create the seal, and then 1/2 to 3/4 turn to create the vacuum.

I suppose I could try to take a quick video tomorrow

Ya would be nice. I didnt know if you go all way to the glands as much as you can.

 

[thedudefather]

Ya would be nice. I didnt know if you go all way to the glands as much as you can.

You definitely want the whole thing in the cup to maximize the vacuum being created. It'll help increase the size of your glans as well, at least that's my understanding.

@oldandlively want to chime in on the last statement?

But yeah I'll post a quick video tomorrow showing how I put it on. Others may have different ways but mine seems to work for me.

 

[oldandlively]

You definitely want the whole thing in the cup to maximize the vacuum being created. It'll help increase the size of your glans as well, at least that's my understanding.

You got it right. Have the glans as far into the cup as possible. Rotate the knob until the inner plate is about 1 to 1.5 rotation from the very top. All you need is 1/2 to 3/4 turn of the knob to preven over pressurization. Sometimes, when we go from one cup size to the next, there is a gap between the penile body, the glans and the shaft, we have have to bulk up the gap by using a light wrap, such as TheraBand or similar soft plastic material, to generate friction between the skin and the cup's wall. Once the glans is fully shoved into the cup, THEN roll the sleeve over the cup and penis shaft, make sure there's a good contact and seal BEFORE turning knob to engage the pressure.

I'm sorry to say that other cup devices have not been tested for pressure engagement based on the concordian pump or the vacuum hand pump. Only SiliStretcher got tested so far.

 

[Txgulf]

You got it right. Have the glans as far into the cup as possible. Rotate the knob until the inner plate is about 1 to 1.5 rotation from the very top. All you need is 1/2 to 3/4 turn of the knob to preven over pressurization. Sometimes, when we go from one cup size to the next, there is a gap between the penile body, the glans and the shaft, we have have to bulk up the gap by using a light wrap, such as TheraBand or similar soft plastic material, to generate friction between the skin and the cup's wall. Once the glans is fully shoved into the cup, THEN roll the sleeve over the cup and penis shaft, make sure there's a good contact and seal BEFORE turning knob to engage the pressure.

I'm sorry to say that other cup devices have not been tested for pressure engagement based on the concordian pump or the vacuum hand pump. Only SiliStretcher got tested so far.

So you wanna pull glans back all the way before entering ?