NEW - SiliStretcher All Day Stealth Penis Vacuum Stretcher and Hanger
One of the first threads with hanging mentioned I seen was this one so I figure I could ask this here, what would be the minimum weight for hanging? I ask because I have a prince albert and I'm noticing the larger my piercing, the larger the flaccid hang. I currently wear a 2 gauge stainless hoop with another attached and it seems to keep me semi stretched all day.
Can’t you take out the rings while you train? I mean the minimum weight you can hang could be as little as 1 pound but gains will take a very long time. Maybe you can stick to using your SiliStretcher as an ADS. This will give you lots of time and it should not effect the ring.
Oh no, i take the ring out all the time, i was just wondering as it is a very heavy piercing and i noticed it helps keep me extended all day. I dont use an ADS or a hanger but i do have the heavy piercing. I suppose I just want to know if an ounce or two over years could be beneficial
How do I get on that list to get them both?
Can you please link to glans cap you bought?I found a little trick for the Silicap if you are having problems like me when Hanging.For me the Silicap was pulling up a bit away from the tip of my glans when I was doing my 1 hr hang causing a air pocket at the tip and I was getting a little swelling in that area.When I got the Silipads and tried them they greatly reduced the swelling and puffiness a lot but the silicap was still pulling up a tad at the tip.For me this all started when I was hanging with anything over 8 lbs.I am at 12 lbs now.How I fixed the cap slippage was I took a sewing needle and poked one small hole right at the center tip of the Glans Cap.After doing this the glans cap remains tight and now I get no more pulling up off the tip like I used to.I used this Cap twice now hanging and can confirm it stays put.Just a little trick I thought to share if your having the same problem as me.
I found a little trick for the Silicap if you are having problems like me when Hanging.For me the Silicap was pulling up a bit away from the tip of my glans when I was doing my 1 hr hang causing a air pocket at the tip and I was getting a little swelling in that area.When I got the Silipads and tried them they greatly reduced the swelling and puffiness a lot but the silicap was still pulling up a tad at the tip.For me this all started when I was hanging with anything over 8 lbs.I am at 12 lbs now.How I fixed the cap slippage was I took a sewing needle and poked one small hole right at the center tip of the Glans Cap.After doing this the glans cap remains tight and now I get no more pulling up off the tip like I used to.I used this Cap twice now hanging and can confirm it stays put.Just a little trick I thought to share if your having the same problem as me.
What are the durps? Are they going to be more durable? I'm asking because my length work is at a halt because I need some sleeves. I can order some today if they will work.
The Glans Cap I use came with my SIlIStretcher..
The Duro SiliSleeves will be twice the strength. They are scheduled to go out next week but we had some issue with shipping that may delay it a day or two.
Last edited by a moderator:
Dang I'll have to wait I suppose. I'm needing something for an ADS but haven't gone wrong with and ACE wrap before. I was going to start doing some hanging but needed sleeves for that. I will probably order one now anyways since I'll only be doing lower weights for now and manual strechtes.
Last edited by a moderator:
Definitely order your SiliStretcher now and get used to it, we will send you the Duro sleeves when they come in. Everyone who gives a SiliStretcher review receives the Duro Sleeves at no charge.
Just noticed my review doesn't seem to be on the website. Annoying, it was a long one
@Lightning may be able to help.
The more suggestions the better so keep these ideas coming and throw them out here
The New SiliSleev Duros start shipping this Friday, May 31st!
All SiliStretchers now come standard with these New SiliSleev Duros!
Details
These are the new improved SiliSleevs to be used with the SiliStretcher.
They are semi-transparent to better monitor your penis and are very durable.
They are currently available with inside diameters .75" (19mm) & 1" (25mm)
Lengths are 5.7" (145mm) and can be cut by user or we can custom cut to size free of charge.
Current SiliStretcher Owners that are Currently Active in this thread
If you are currently active in this thread, you are eligible for a complimentary set (shipping charges apply). Send an email to sales@mattersofsize.com with your full name and email so we can verify and get you a complimentary set.
Within the next two months, we will have two other diameters and longer lengths available in sizes up to 8" (210mm) long as well as an 8" (210mm) SiliCap.
Get those emails in!
All SiliStretchers now come standard with these New SiliSleev Duros!
Details
These are the new improved SiliSleevs to be used with the SiliStretcher.
They are semi-transparent to better monitor your penis and are very durable.
They are currently available with inside diameters .75" (19mm) & 1" (25mm)
Lengths are 5.7" (145mm) and can be cut by user or we can custom cut to size free of charge.
Current SiliStretcher Owners that are Currently Active in this thread
If you are currently active in this thread, you are eligible for a complimentary set (shipping charges apply). Send an email to sales@mattersofsize.com with your full name and email so we can verify and get you a complimentary set.
Within the next two months, we will have two other diameters and longer lengths available in sizes up to 8" (210mm) long as well as an 8" (210mm) SiliCap.
Get those emails in!
Last edited:
That’s completely up to you but I feel as though after a length routine I would want to spend a greater amount of time in passive mode. This also depends on which exercise or routine you’re using. For instance if you’re using triangle pyramids by the time you’re done you will want to wear your this also depends on which exercise or routine you’re using. For instance if you’re using Triangle Pyramids by the time you’re done You will only be able to use the silly you will only be able to use the SiliStretcher in passive mode.
View attachment 1821944
View attachment 1821945View attachment 1821946View attachment 1821955
Introducing the new SiliStretcher 2.0
We have performed some major upgrades to the original SiliStretcher based on feedback by all the current users making the best ADS/Hanger combo even better!
New features
Our new thicker acrylic formula and re-enforcement system improves overall strength to the acrylic vacuum bell to eliminate hairline cracks that occasionally happened with the original SiliStretcher.
Our new semi transparent SiliSleev Duros (DuroSleevs)will not only last much longer than the original SiliSleevs but intensify your stretching and hanging sessions while allowing you to monitor your penis.
The new piston system is now set to where the piston travels half the vacuum bell to allow you to insert your penis into the bell, then apply vacuum for more security and control.
We've now added a DuroBand to provide an extra layer of protection around the SiliStretcher rim where the SiliSleev Duro attaches. You simply slide the DuroBand over the SiliSleev at the base of the SIliStretcher. This great addition eliminates wear to the SiliSleev when wearing under jeans and rubbing against the SiliSleev increasing the life of your SiliSleevs & DuroSleevs.
We've also added a new 1.25" diameter SiliStretcher which is the sweet spot for men that don't fully fit in the 1.5" version or find the 1.1" too small. This new 1.25" version will be the perfect fit for most men.
Best of all, if you are a Current SIliStretcher owner and are currently posting updates in this thread, you are eligible for a complimentary 2.0 version (shipping rates apply).
View attachment 1821945View attachment 1821946View attachment 1821955
Introducing the new SiliStretcher 2.0
We have performed some major upgrades to the original SiliStretcher based on feedback by all the current users making the best ADS/Hanger combo even better!
New features
- Reduction to the overall length for stealth and strength
- A new thicker acrylic formula for strength
- New long lasting SiliSleev Duros to intensify your stretches
- Improved vacuum piston system for grip
- New deeper SiliPads to control fluid retention
- Reinforcements for heavier hanging/tension stretching
- DuroBand to add a layer of protection around the SiliStretcher rim
- New 1.25" (3.2mm) diameter available
Our new thicker acrylic formula and re-enforcement system improves overall strength to the acrylic vacuum bell to eliminate hairline cracks that occasionally happened with the original SiliStretcher.
Our new semi transparent SiliSleev Duros (DuroSleevs)will not only last much longer than the original SiliSleevs but intensify your stretching and hanging sessions while allowing you to monitor your penis.
The new piston system is now set to where the piston travels half the vacuum bell to allow you to insert your penis into the bell, then apply vacuum for more security and control.
We've now added a DuroBand to provide an extra layer of protection around the SiliStretcher rim where the SiliSleev Duro attaches. You simply slide the DuroBand over the SiliSleev at the base of the SIliStretcher. This great addition eliminates wear to the SiliSleev when wearing under jeans and rubbing against the SiliSleev increasing the life of your SiliSleevs & DuroSleevs.
We've also added a new 1.25" diameter SiliStretcher which is the sweet spot for men that don't fully fit in the 1.5" version or find the 1.1" too small. This new 1.25" version will be the perfect fit for most men.
Best of all, if you are a Current SIliStretcher owner and are currently posting updates in this thread, you are eligible for a complimentary 2.0 version (shipping rates apply).
Last edited: