Girth work NEW - MOS MityVac HydroVac Penis Pump Line - L@@K

arkailija said:
Yup, you can wear the Silicap while in the pump. Haven't done so much of SSJs with the sleeve on, I really find it easy to put on and to take off. Of course it adds some steps to the session but then again, you are participating here with gains in mind, right? ;)

@StonerWithABoner , I recall that the pump does withstand water quite well, @Lightning is best one to confirm this. Most pumps with gauges don't dig water, that's for sure, but with the water trap things should be peachy. But as said, this is just my intuition, Lightning knows for sure.
I'm getting the big one (3.5" LOL ), not sure yet if I'd use it in the shower, due to my living conditions. We shall see. It would be best for me to have things right here next to my desk anyway, as I'm in front of the computer for longer periods, got to make use of that time!
riko.jpg
Click to expand...
I'm really hyped for the vacuum pump, but it sucks when you live with parents and just can't have that shit lying in bathroom. I mean, technically I can, but awkard....
 
I’m working really hard LOL on finding a tool box that holds all of my PE gear with a lock. With the size of the lengthmaster, the Mityvac and the MOSRed is making this difficult but I will find one. I’m gonna go to Home Depot tomorrow and see what’s up.
 
Hey guys, quick question regarding my MityVac... I managed to siphon a bit of water into the hand pump after the catch can was full. Now it seems that I may have a bit of rust in the pump and I can definitely see some brown discoloration on the plunger rod. Any thoughts on how to prevent this? Maybe pull some 3-in-1 through the pump? Or just spray wd-40 into the plunger side? Thanks in advance!
 
I would suggest you firstly use the pump with the hose on something like a cloth, anything like that just so you can use pressure to clear any fluid. If you got a bike tire, connect the hose so it can suction air out.

Its not actually necessary this, but it will help ensure all the water inside is gone.

When your done with that, apply WD40.
 
Hi Jim,

These are the new pump guns and now have a textured handle. This prevents them from slipping out your hand when used in the shower. The Pump Cylinder should say MityVac on it.
 
Lightning said:
Hi Jim,

These are the new pump guns and now have a textured handle. This prevents them from slipping out your hand when used in the shower. The Pump Cylinder should say MityVac on it.
Click to expand...

Hey Lighthing. Ah cool stuff! Yes the Pump Cylinder indeed says MityVac. Very excited to get started with it. And again, really suprised over the fast shipment since I live in Europe, Sweden. From order to door-delivery 5 days!

Thanks for quick answer and support.
 
Hello,
I recently bought the MityVac and so far I love it. However, I have ripped one Mity Sleeve right through on the seam after the third use. I ordered another one and let it rest 24 + hours stretched over a pipe larger than my girth, as recommend. It has begun to split after my first session with it. ☹️
Has anyone else had this issue? Becoming frustrated with Mity Sleeves...
Thanks for any help or insight.
 
kevtr1 said:
Hello,
I recently bought the MityVac and so far I love it. However, I have ripped one Mity Sleeve right through on the seam after the third use. I ordered another one and let it rest 24 + hours stretched over a pipe larger than my girth, as recommend. It has begun to split after my first session with it. ☹
Has anyone else had this issue? Becoming frustrated with Mity Sleeves...
Thanks for any help or insight.
Click to expand...

Hi @kevtr1 the MitySleev is not a necessity to use the MityVac pumps. The MityVacs have a flanged end to create a seal.

Send a picture of the damage to [email protected] and you will get a replacement or a refund. Also, there are two types of MitySleevs, one is commonly used for Bathmate pumps and the other is for smaller pumps. Maybe you need the other version.
 
Thanks lightning, I'll send an email with the pictures. I guess my pumping has Mity Sleeves bursting at the seams... Literally!
I must need a stronger pump sleeve...lol
 
Speaking from recent experience, you might want to stretch it before each use. I have ripped three of them because of my base girth when pumping in the 2.25" cylinder. Maybe even try letting it sit in very warm water for about 10 minutes before use to make it more playable.
 
  • Like
Reactions: DLD
kevtr1 said:
Speaking from recent experience, you might want to stretch it before each use. I have ripped three of them because of my base girth when pumping in the 2.25" cylinder. Maybe even try letting it sit in very warm water for about 10 minutes before use to make it more playable.
Click to expand...

That’s a very good point. If you have a hairspray can you can simply stretch it over the can then with a hairdryer and it will loosen temporarily. As the heat goes down it will tighten.
 
Hi can I order replacement for the tubing? Mine is not working and lets in air I literally have to spare the trigger and it does nothing n loses pressure immediately.
 
SupposedToBeBig said:
Hi can I order replacement for the tubing? Mine is not working and lets in air I literally have to spare the trigger and it does nothing n loses pressure immediately.
Click to expand...

of course you can there’s a lifetime warranty on everything except for sleeves. Simply send an email to [email protected] tell them the issue and they will ship you out a replacement. It is that simple.
 
Lightning said:
View attachment 1819741
HYDROVAC PENIS PUMPS BY MOS
Introductory Price from $134.00

View attachment 1820055
View attachment 1820050
View attachment 1820051

Get the best of both worlds in one penis pump system. The New MityVac HydroVac by MOS offers a wide range of sizes from 1.75" to 4" diameters hydrovac cylinders to accommodate your pumping goals by either air vacuum pumping or hydro water pumping.

View attachment 1819742
View attachment 1819744
​
Our MityVacs come with a Lifetime Warranty, Silisleev Silicone Penis Sleeves for Fluid Reduction, Hydro Water Trap, Pelvic Silicone Comfort Seal, Titan Gel, SiliRings and a Hard Shell Carry Case

Includes
  • Six hydro & vacuum cylinder diameter sizes to choose, ranging from 1.75" up to 4".
  • Lab grade acrylic vacuum cylinders with flange for comfort. Dimensions 10" (254mm) long with 4mm thick walls and precise measurements in inches and millimeters to track penis gains.
  • Quick Release fittings on the cylinder and vac-lines allow pressure to be maintained, without the vacuum pump needing to be attached to the vacuum cylinder.
  • Hydro0trap water trap for Hydro Pumping with water.
  • High quality ergonomic nylon body vacuum pump and precise vacuum gauge.
  • Vacuum range: 0-30 Hg, 0-760 mmHg, with a quick release trigger for safety.
  • Two revolutionary designed silicon penis compression silisleevs to reduce fluid buildup and achieve uniform penis gains by eliminating the unwanted baseball bat shape and donut effect deformities caused to the penis.
  • One revolutionary designed silicon glans silicap to prevent swelling of the glans.
  • Four constriction rings to keep the penis enlarged during and after pumping.
  • Soft silicone removable MitySleev pelvic cylinder seal for extra seal and comfort with long term use.
  • Russian Titan Gel Penis Lube
  • Hard Shell Carry Case
  • Lifetime Warranty

What size pump cylinder to order?

To Gain Length
The rule of thumb is if you are focusing on penis length, order a MityVac pump cylinder in a diameter that is closest to the thickest part of your erect penis girth (see measurements below). The idea is to pack your erect penis in the cylinder and pump so your penis only extends in length since it can't expand much in girth.

To Gain Length and Girth
Order a MityVac pump cylinder that is .25" larger in diameter than the thickest part of your erect penis girth. This will allow your penis to expand in girth and length at the same time. Ordering a pump cylinder that is much wider than the girth of your penis is not beneficial and will actually cause you to grow a deformed penis over time. So stick with the recommendations we provide, this is all data collected from pump users over the past 20 years.

How to accurately measure your penis for pump cylinder sizing

Get a piece of string, thread, wire, etc.

Get your penis erect.

Wrap the string around the thickest part of your ERECT shaft or base (whatever is thickest).
For most people, the thickest part of the penis is at the base of the penis by the pelvic bone. In some cases, some men have a thicker upper shaft. If this is the case, measure the thickest part of your shaft.

Mark where the string where it overlaps itself with a pen so that you can see the pen mark on both ends of the string.

Lay the string on a flat surface and measure the distance between the two pen marks with a ruler.

If your erect girth measurement is:

4” to 4.75” Order a 1.75″ diameter pump cylinder
5″ to 5.75” Order a 2″ diameter pump cylinder
6″ to 6.75” Order a 2.25” diameter pump cylinder
7″ to 7.5” Order a 2.5” diameter pump cylinder
7.75” to 8.25” Order a 2.75” diameter pump cylinder

If your measurement is not listed here – Please Contact Us

NOTE: A tailors tape is good to provide accurate measurements. The MityVac standard cylinder length is 9.25 Inches.

How do I Configure my MityVac for Hydro Pumping and Dry Pumping?

How do I use the MityVac Penis Pump?
There are many great routines here in our Penis Pumping Forum. This is a great starters guide below.

Check out more users penis pumping routines in our Penis Pumping Forum


Click to expand...
Great for many other things as well.
 
@Lightning

Hello, I am thinking of buying this pump but I was told by a friend that if you hold an erection in it for more than 30 seconds you can cause an injury. is this true? will the silisleev prevent this?

Also do you plan on making this pump hands free in the shower, you could create something like this

CleanShot 2023-01-04 at 5.25.18@2x.pngflesh.jpeg
 
optuma said:
@Lightning

Hello, I am thinking of buying this pump but I was told by a friend that if you hold an erection in it for more than 30 seconds you can cause an injury. is this true? will the silisleev prevent this?

Also do you plan on making this pump hands free in the shower, you could create something like this

View attachment 1832349View attachment 1832348
Click to expand...

Lightning is no longer with us. Being erect in a pump is the best way to gain girth especially when done with the ssj or the 5x5x3. The Mityvac is by far the best pump. I never recommend using a sleeve while pumping as it restricts expansion
 
You must log in or register to reply here.
Back
Top