Girth work NEW - MOS MityVac HydroVac Penis Pump Line - L@@K

One of the benefits of hydro-pumping is the ability to fill the pump cylinder up with warm water to help relax tissue as you pump. Relaxing ligs/tissue aid in better tissue expansion.

Also hydro-pumping has been known to help reduce fluid retention but many people report that they still get fluid retention when hydro pumping.

So a great combination is hydro-pumping with warm water and a silisleev on. This way you get the relaxing of tissue as it expands but control fluid retention. Pop a siliring on to keep the tissue expanded and you are all set.
 
Last edited:
huge-girth said:
A very funny question I will say. As long as you are getting same expansion/effect you get after your bathmate session, you will do just fine with the mityvac
Click to expand...

I am looking for hard data. Head to head with the best, the Bathmate. I really love that the base ring of the MityVac works with the Bathmate, big props to @Lightning. So what I want is people who have both to give a very honest review. With that data I make adjustments to SRT. It will also allow us to get data comparisons on post girth expansion, edema or fluid retention, fatigue levels, length of post girth expansion and many other data points.
 
Attention All MityVac users, we just updated the MityVacs with new high-end air-vac connectors. Tomorrow we will be sending everyone the new 12" air-vac hose and CBC cylinder connector that screws on top of your MityVac pump cylinder. These are new high-end parts and they are a new style and they will fix any issues you may have with a loose connection. We will also send you an extra set of MityRings with the upgrade.

Look for an email shortly.
 
We aim for the best and that is why we put these out there at this introductory price. Its win, win. Members get the to save money and get all the upgrades for life and we get the feedback to make them better.
 
DLD said:
I am looking for hard data. Head to head with the best, the Bathmate. I really love that the base ring of the MityVac works with the Bathmate, big props to @Lightning. So what I want is people who have both to give a very honest review. With that data I make adjustments to SRT. It will also allow us to get data comparisons on post girth expansion, edema or fluid retention, fatigue levels, length of post girth expansion and many other data points.
Click to expand...

As you're well-aware, I've had a love affair with my modded X40 for 4+ years (and have added the Vitallus+ to the mix just recently). With that being said, I'm certain I would be able to provide in-depth comparison between the two (the most obvious advantage of the MityVac being it's ability to be used outside of the bathroom). I'll keep checking my mailbox and make a full report once received.

As an aside...water pumping has the advantage over air pumping due to the higher density of H2O, thusly able to impart more force against your member, (think of 'torque' vs. 'horsepower')
 
Big Schwanz Acht said:
As you're well-aware, I've had a love affair with my modded X40 for 4+ years (and have added the Vitallus+ to the mix just recently). With that being said, I'm certain I would be able to provide in-depth comparison between the two (the most obvious advantage of the MityVac being it's ability to be used outside of the bathroom). I'll keep checking my mailbox and make a full report once received.

As an aside...water pumping has the advantage over air pumping due to the higher density of H2O, thusly able to impart more force against your member, (think of 'torque' vs. 'horsepower')
Click to expand...

Great information thank you Big! In your opinion matters big time because you’re such an avid Bathmate user.
 
When you guys receive the new upgraded MityVac parts this week, the threaded air-vac valve that screws into the top the MityVac cylinder only needs to be finger-tight. Do not over-tighten the valve or it will crush the o-ring and leak air.

A good way to test if your valve is too loose or too tight and leaking is to fill the cylinder up with water and hold upside down to see if you get any drops of water dripping. You can also add a little clear waterproof silicone sealer/caulk to the threads with your finger before you screw in, like we do.

View attachment 1820185View attachment 1820186View attachment 1820188
 
Last edited:
giphy.gif
 
Here is a quick crude video on the MityVac HydroVac. It is a bit dark and we are currently re-shooting It with better lighting. That will be up shortly.

 
Last edited:
85ray said:
Should I also where silicap ?
Click to expand...

Yup, you can wear the Silicap while in the pump. Haven't done so much of SSJs with the sleeve on, I really find it easy to put on and to take off. Of course it adds some steps to the session but then again, you are participating here with gains in mind, right? ;)

@StonerWithABoner , I recall that the pump does withstand water quite well, @Lightning is best one to confirm this. Most pumps with gauges don't dig water, that's for sure, but with the water trap things should be peachy. But as said, this is just my intuition, Lightning knows for sure.
I'm getting the big one (3.5" :D ), not sure yet if I'd use it in the shower, due to my living conditions. We shall see. It would be best for me to have things right here next to my desk anyway, as I'm in front of the computer for longer periods, got to make use of that time!
 
85ray said:
So when pumping with mityvac or bathmate I should use silisleeve(which size I'm 7Lx5w(should I use widest and longest bc of expansion u get when pumping). Should I also where silicap? If I should be wearing silisleeve n silicap during pumping do I keep them on while doing(ssj) the 5x5x3 (pump ssj pump repeat)?
Click to expand...

You should always wear the silisleev & silicap while pumping. The silisleev and silicap prevent fluid retention in penis and glans from excessive vacuum/pumping sessions (either water or dry).

When using any type of vacuum pump, vacuum hanger or vacuum stretcher, always wear the silicap and silisleev. They also prevent bruising and reduce sensitivity.

When not exercising, use the silisleev all day and night to heal in a extended state and use the siliring to heal in a expanded state.

For a 7x5 penis, you want to use the longest and widest silisleev 145x27
 
Includes
  • Six hydro & vacuum cylinder diameter sizes to choose, ranging from 1.75" up to 4".
  • Lab grade acrylic vacuum cylinders with flange for comfort. Dimensions 10" (254mm) long with 4mm thick walls and precise measurements in inches and millimeters to track penis gains.
  • Quick Release fittings on the cylinder and vac-lines allow pressure to be maintained, without the vacuum pump needing to be attached to the vacuum cylinder.
  • Hydro0trap water trap for Hydro Pumping with water.
  • High quality ergonomic nylon body vacuum pump and precise vacuum gauge.
  • Vacuum range: 0-30 Hg, 0-760 mmHg, with a quick release trigger for safety.
  • Two revolutionary designed silicon penis compression silisleevs to reduce fluid buildup and achieve uniform penis gains by eliminating the unwanted baseball bat shape and donut effect deformities caused to the penis.
  • One revolutionary designed silicon glans silicap to prevent swelling of the glans.
  • Four constriction rings to keep the penis enlarged during and after pumping.
  • Soft silicone removable MitySleev pelvic cylinder seal for extra seal and comfort with long term use.
  • Russian Titan Gel Penis Lube
  • Hard Shell Carry Case
  • Lifetime Warranty

Bump
 
Two quick questions! Is it loud, Will my roommates hear me pumping? Also how large is the box it is shipped in?
 
Slampocalypse said:
Two quick questions! Is it loud, Will my roommates hear me pumping? Also how large is the box it is shipped in?
Click to expand...

The box is a white box 12" x 6" x 6". The pump doesn't make noise, there is no motor or anything that runs.

There is a complete unboxing video above and on the first page of this thread.
 
Last edited:
  • Like
Reactions: DLD
We would have never abandon a Hydro system. We know the value of water pumping and that’s why we created a pump that you could use with water. Not only water but also with air with the same intensity. Our pump gives the ability to do both dry and wet pumping which makes it the best pump around as it does both functions very well.
 
I found i didn’t get much gains from bathmate unless i used it almost every day, but it seems for air pumping the recommendations are usually every other day. Thoughts?
 
Slampocalypse said:
I found i didn’t get much gains from bathmate unless i used it almost every day, but it seems for air pumping the recommendations are usually every other day. Thoughts?
Click to expand...

I think with either water or air pump and the SRT methodology should be followed. You can train daily if you go with the 5×5×3 routine found an SRT as it brings the best expansion of tissue with very little water retention.
 
Stephano2879 said:
@Lightning quick question for you i ordered the MityVac on Tuesday March 19 and was wondering if you might happen to know when it might be shipped out just want to know just incase i might not be home i would want someone here to scoop up the package thnx bro
Click to expand...

You would need to PM me your full name and email. Or log into your shop account for real time tracking.
 
I think mine will be here tomorrow! I can’t wait to start creating routines!
 
Think i'm sold on this.. having used a bathmate on and off for a few years with little progress and lots of difficulties, this seems to fix everything i had an issue with.

Question re sizing, and apologies if its a stupid question - why is there 3 dimensions (e.g. 2.25 x 1.75 x 9.25)?

Also, my measurements are 5.1 MSEG, 5.7 BEG and 7.8 NBPEL, looking for girth and length - which size should I go for?
 
jordey said:
Think i'm sold on this.. having used a bathmate on and off for a few years with little progress and lots of difficulties, this seems to fix everything i had an issue with.

Question re sizing, and apologies if its a stupid question - why is there 3 dimensions (e.g. 2.25 x 1.75 x 9.25)?

Also, my measurements are 5.1 MSEG, 5.7 BEG and 7.8 NBPEL, looking for girth and length - which size should I go for?
Click to expand...

For your EG, a 2" diameter is good for girth and length. If you are focusing primarily on length, a 1.75" would be the choice.

I think the three diameters is a typo.
 
  • Like
Reactions: DLD
jordey said:
Think i'm sold on this.. having used a bathmate on and off for a few years with little progress and lots of difficulties, this seems to fix everything i had an issue with.
Click to expand...

How could you not be sold on this? ?Everything that we are putting out now puts everything we used to sell to shame. I’m not saying what we used to sell was not good but what I am saying is they could’ve made it so much better but they did not. We took our spot and what we needed to do to be in control of the product, the quality and price. Expect excellence and perfection! I have not received mine yet but I already know Lightning would never send me something unless it was amazing!
 
Lightning said:
For your EG, a 2" diameter is good for girth and length. If you are focusing primarily on length, a 1.75" would be the choice.

I think the three diameters is a typo.
Click to expand...

Thanks! What size (roughly) would this take me to before I need to size up? Also any idea of delivery cost/ times to the UK? (sorry for all the questions...)


DLD said:
How could you not be sold on this? ?Everything that we are putting out now puts everything we used to sell to shame. I’m not saying what we used to sell was not good but what I am saying is they could’ve made it so much better but they did not. We took our spot and what we needed to do to be in control of the product, the quality and price. Expect excellence and perfection! I have not received mine yet but I already know Lightning would never send me something unless it was amazing!
Click to expand...

So my issues with the bathmate have been as follows:
-sucking the tubes and veins at the base, causing ball pain (super annoying)
-loss of suction if not position perfectly
-unable to tell how much actual pressure is being applied, 'feel' isnt a good metric in my books

By the sounds of it, Mityvac solves all 3? When i really get everything perfect with the BM I have great sessions... It's just rare I can get everything working perfectly
 
Just chiming in. You can get damn fine gains with the 2" or 2.25. Sizing up, that will vary between men, it's good to think about future but enjoy the ride as well. ;) Just order accordingly, don't think that a bigger cylinder would automatically be better, especially in the beginning. (I confess, I think I made that error several years ago myself, as in purchasing a tube much bigger than needed for just cock pumping.)

The three issues you mention, yes, very solvable. The Mitysleeve itself can solve the suckage of testicles. And the sleeves transfer the force greatly! I had a session by Saturday using the longer sleeve and oh boy, haven't had such a session for a while!

All tools have a learning curve but you should be able to get a good seal easily with the Mityvac.

And lastly, yes, this is a big point, the pressure! Takes away the guessing game and you could be doing the low pressure, medium pressure and high pressure session so much easier.
(As in following the 5x5x3 routine, doing the first pump with lower pressure and increasing it rep by rep.)
 
jordey said:
Thanks! What size (roughly) would this take me to before I need to size up? Also any idea of delivery cost/ times to the UK? (sorry for all the questions...)
Click to expand...

A 2" diameter will get you up to 6" EG. Then 2.25" will get you to 7" EG.
The best thing is to work In stages and not jump two sizes up. This is a big mistake many people make. People don't gain by jumping to a massively large size cylinder.

Shipping times and rates vary, you can got to our shop and enter the details and you will get a shipping price. We have USPS (Slow cheap way) and DHL Fast expensive way. There is also FedEx and UPS.


jordey said:
So my issues with the bathmate have been as follows:
-sucking the tubes and veins at the base, causing ball pain (super annoying)
-loss of suction if not position perfectly
-unable to tell how much actual pressure is being applied, 'feel' isnt a good metric in my books

By the sounds of it, Mityvac solves all 3? When i really get everything perfect with the BM I have great sessions... It's just rare I can get everything working perfectly
Click to expand...

Sounds like you will solve allot those Bathmate issues with the MityVacs. Bathmates are great starter pumps but serious pumpers use high end pumps with gauges for tracking accuracy. Also maintaining vacuum is important. It's about getting the most efficiency out of each session.
 
@Lightning i got a problem wondering if you could help me out i ordered my MityVac on Tuesday March 19
i received it on Wednesday march 27 i did not think anything of it at first but after using it for the past few days it seemed really really small i could only do a few minutes session

so today i did my session and it was crazy tight i almost could not get out of it so i measured the tube and saw that that they sent me the wrong size tube i ordered a 2.5 they sent me a 2.25


View attachment 1821334
 
Last edited:
Stephano2879 said:
@Lightning i got a problem wondering if you could help me out i ordered my MityVac on Tuesday March 19
i received it on Wednesday march 27 i did not think anything of it at first but after using it for the past few days it seemed really really small

so today i did my session and it was crazy tight i almost could not get out of it so i measured the tube and saw that that they sent me the wrong size tube i ordered a 2.5 they sent me a 2.25


View attachment 1821334View attachment 1821335
Click to expand...

My apologies. Keep that one and we will get you out a new one in the morning.
You can use the tighter size for length work as a bonus.

PM me your name and email and I will have them ship it out in the AM.
 
Lightning said:
My apologies. Keep that one and we will get you out a new one in the morning.
You can use the tighter size for length work as a bonus.

PM me your name and email and I will have them ship it out in the AM.
Click to expand...

great thnx brother gonna pm you my info now was also wondering if they shipped out the water trap yet and if i would get a tracking number for it thnx again bro :)
 
Stephano2879 said:
great thnx brother gonna pm you my info now was also wondering if they shipped out the water trap yet and if i would get a tracking number for it thnx again bro :)
Click to expand...

Shipping this week. They were on backorder but wanted to get your system out to get you started.
 
  • Like
Reactions: DLD
You must log in or register to reply here.
General chit-chat
Help Users
  • MoS Notifier MoS Notifier:
    Guest Sam hi has joined the room.
  • S (Guest) Sam hi:
    How's everyone
    Quote
  • oldandlively @ oldandlively:
    @sam hi, good to see you brother. Post in the forum and we'll chat more.
    Quote
  • MoS Notifier MoS Notifier:
    Akteon1 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest Jayson44 has joined the room.
  • J (Guest) Jayson44:
    hi
    Quote
  • J (Guest) Jayson44:
    Out of sheer curiosity, is anyone interested in having a premature O together while we watch videos?
    Quote
  • J (Guest) Jayson44:
    Anyone wanna cum to asians twerking or kpop vids
    Quote
  • Akteon1 @ Akteon1:
    Hi. Good to be here.
    Quote
  • oldandlively @ oldandlively:
    @Akteon1, good to see you here. Join us into the forum.
    Quote
  • Akteon1 @ Akteon1:
    Which forum? How do I get there?
    Quote
  • oldandlively @ oldandlively:
    @Akteon1, New Member Introduction Forum
    Quote
  • MoS Notifier MoS Notifier:
    McDong is our newest member. Welcome!
  • Akteon1 @ Akteon1:
    I was approached by a coach from a Nigerian phone number?
    Quote
  • MoS Notifier MoS Notifier:
    gabrieljones is our newest member. Welcome!
  • oldandlively @ oldandlively:
    @Akteon1, visit other sub forums to check out all the info in PE. Forum list
    Quote
  • oldandlively @ oldandlively:
    More importantly, see the first three posts in this sub forums to answer most of your doubts and questions: Ask questions
    Quote
  • MoS Notifier MoS Notifier:
    tbean750 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest pedguin has joined the room.
  • P (Guest) pedguin:
    Hello Im looking into getting an ADS and some stretcher what would you guys recommend
    Quote
  • H @ huge-girth:
    pedguin said:
    Hello Im looking into getting an ADS and some stretcher what would you guys recommend
    Click to expand...
    Sign-up on the forum. Buy the length master and the Silistretcher both from the MOS shop
    Quote
  • P (Guest) pedguin:
    ive been looking at the silistretcher for over half a year, and will look into the length master thank you.
    Quote
  • MoS Notifier MoS Notifier:
    silverberg is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    thescholarjt is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    mos is our newest member. Welcome!
      MoS Notifier MoS Notifier: mos is our newest member. Welcome!
      Back
      Top