Girth work MityVac Hydro Vac Penis Pump User Instructions

[DLD]

Hey Mike...I hate to hijack this thread, but the quick-disconnect valve (the piece that threads-into the top of the cylinder) broke on my MityVac. Is there a way for me to purchase a replacement?
BTW, I've been consistently training and can reach over 21cm in the tube...which equates to about 8.5" BPEL. It's been a looooong road, but I've gained over 2" in length and about 1.5" in girth over the last 8 or so years

Wow...welcome back! Yes if you contact sales@mattersofsize.com they will replace your valve for free. Congratulations on your incredible gains!

 

[Big Schwanz Acht]

Thanks Mike!! My real-world experiences with a larger johnson is nothing short of amazing. Just knowing the moment any 'naked fun' begins, I'll be able to 'represent' like she's never had before...quite the rush! PE also permeates into my daily life feeling uber-confident in any/all settings.

They're no short-cuts, enjoy the journey and reap the benefits!

 

[Davide1977]

Good evening sorry since I ordered the 2.25 cylinder instead of the 2 I have now I wanted to know if the rubber gasket that goes to the base of the penis will still fit my receipt with the 2 inch kit. Or will I get a bigger one with the new cylinder? Then I wanted to know if the Silicap-2s have an air hole at the tip. My receipt has a hole in it, but I don't know if it's a defect or should be like this. The problem is that with this hole, when I wear it, the air enters and a bubble forms on the tip. If I then used oil to make it enter better, even the pressure of the air entering makes the silicap2 slip away. Thank you

 

[DLD]

Yes there is an air hole to relieve pressure. The rubber gasket should easily be used with bigger tube

 

[Davide1977]

I have to order the mitysleve because mine broke after only 15 days. Which should I order for a 2.25" mityvac cylinder?

 

[DLD]

I have to order the mitysleve because mine broke after only 15 days. Which should I order for a 2.25" mityvac cylinder?

Send in to get a bigger sleeve. This will be covered for warranty. Send request to sales@mattersofsize.com

 

[Davide1977]

Good evening, I wanted to ask if duroring can cause fluid retention and therefore donut effect. I use the duro ring for half an hour after my mityvac session and it seems to me that when I use it, it creates fluid retention. Thank you

 

[DLD]

Good evening, I wanted to ask if duroring can cause fluid retention and therefore donut effect. I use the duro ring for half an hour after my mityvac session and it seems to me that when I use it, it creates fluid retention. Thank you

Fluid retention is not a terrible thing. With any expansion there will always be a bit of fluid retention

 

[Davide1977]

I received the cylinder with mitysleeve 2 days ago and I have to tell you that the mitysleeve broke just after two times. It's already the second time. But is it possible that they are so delicate? To insert it I am forced to spread it with my fingers and it breaks along the seam weld. What do I have to do now? Is it possible that I received a defective item twice? What solution can I adopt? It seems really impossible to go on like this.

 

[DLD]

I received the cylinder with mitysleeve 2 days ago and I have to tell you that the mitysleeve broke just after two times. It's already the second time. But is it possible that they are so delicate? To insert it I am forced to spread it with my fingers and it breaks along the seam weld. What do I have to do now? Is it possible that I received a defective item twice? What solution can I adopt? It seems really impossible to go on like this.

I would go for a larger size. You can request this by sending email to Buymos@gmail.com with Pic of broken sleeve. Free replacement.

 

[Davide1977]

Thank you. But is there a sleeve with a wider entrance hole?

 

[oliver123]

My Mityvac and LM just arrived today, but in my Mityvac box, I didn't get the 'Hydro water trap' for hydro pumping with water. What is the procedure to get it if you forgot to send it to me and also I want to know which one is better for maximum gain, water pumping or air vacuum pumping?

 

[DLD]

Simply send an email to Buymos@gmail.com for what is missing

 

[Davide1977]

Good evening I would like advice for the best solution to stay extended after pumping. I use duroring for half an hour and that's it. I saw the silisleeve2 on the site, but I was wondering if it is a good solution, since it would tighten the penis and therefore reduce the good diameter achieved after pumping. Thank you.

 

[optuma]

Hello,

I love the idea of this pump, and I am considering buying it, but it would be great if there was a shower strap or mount that you can attach to the shower glass panel. This would allow for hands free operation while we are washing.

Does anyone know how I can make this possible, who do I need to contact?

 

[DLD]

Nothing invented yet but I suppose you can make your own strap.

 

[optuma]

Why is water based lubricant recommended for this? can we use caster oil instead?

 

[DLD]

Why is water based lubricant recommended for this? can we use caster oil instead?

Stick with water based lubes to avoid damage

 

[Davide1977]

Hello, I wanted to know if the silisleeve2 is good to be used right after the pumping session with mityvac. Can I wear it all day or do I have to take breaks?

 

[DLD]

Hello, I wanted to know if the silisleeve2 is good to be used right after the pumping session with mityvac. Can I wear it all day or do I have to take breaks?

No

Never wear a sleeve after pumping. Only after length

 

[Davide1977]

No

Never wear a sleeve after pumping. Only after length

For the length, I only do about 20 minutes of manual stretches. Can it be right to use the sleeve2 after stretching? Or is it of no use?

 

[huge-girth]

For the length, I only do about 20 minutes of manual stretches. Can it be right to use the sleeve2 after stretching? Or is it of no use?

Wear a sleeve after stretching to help the penis heal in an elongated state. You can use the ace bandage too for same purpose.

 

[DLD]

Wear a sleeve after stretching to help the penis heal in an elongated state. You can use the ace bandage too for same purpose.

Yup totally necessary

 

[Davide1977]

Good evening, I would like to know if you think the mityvac cylinder can be used without a mity sleev, i.e. without the gasket at the base. I'm using it like this and it doesn't give me any problems. Indeed, the penis inside the cylinder under pressure measures 1 cm. moreover. For what reason do you think? Is it advisable to use the cylinder like this, without a gasket or is it preferable to put it? The problem is that they break right away. Thank you

 

[DLD]

Plenty of men do not use without sleeve. You are doing just fine

 

[limpeh]

no wonder length has been increasing consistently. I've been keeping the sleeve on after pumping. thought

No

Never wear a sleeve after pumping. Only after length

no wonder my length has been increasing consistently but not so much on girth. I've been keeping the sleeve on after pumping. thought that doesn't matter cuz I did pumped

 

[limpeh]

hi guys, wondering what should I do if mityvac starts to lose pressure gradually instead of maintaining pressure

 

[huge-girth]

hi guys, wondering what should I do if mityvac starts to lose pressure gradually instead of maintaining pressure

You increase the pressure a few times during each 5 mins pumping set. The pressure goes down a bit after few seconds or a minute. You increase the pressure to a few times. Practice with the pump, you will find your sweet spot.

 

[DLD]

You increase the pressure a few times during each 5 mins pumping set. The pressure goes down a bit after few seconds or a minute. You increase the pressure to a few times. Practice with the pump, you will find your sweet spot.

Simple

 

[limpeh]

You increase the pressure a few times during each 5 mins pumping set. The pressure goes down a bit after few seconds or a minute. You increase the pressure to a few times. Practice with the pump, you will find your sweet spot.

thanks man!

 

[limpeh]

Simple

indeed simple. I thought I have to dismantle stuffs & clean the valve like bathmate

 

[DLD]

indeed simple. I thought I have to dismantle stuffs & clean the valve like bathmate

Pretty easy maintenance

 

[limpeh]

Pretty easy maintenance

love it! didn't regret my purchase!

 

[huge-girth]

I just recently got the MityVac - it's kinda funny, I had no idea this was brandy new! I had a feeling it was; because, like, the week before I was gonna get a bathmate and just tough it out disciplining myself to bring this apparatus into the shower with me, but I'm so much happier the MityVac is a thing cuz I think dry pumping is for me. It's just easier. After you get all the cords into place it feels like way too much time has gone by. I can only imagine the limited time that parents would have too.

I've been using it for a couple of weeks and I had a few introductory questions/concerns. I did some looking but lemme know if there's a FAQ I missed that answers these questions already, or if this belongs elsewhere.

(1) - When I was reading up on SRT, if I understand correctly, I wanna avoid doing kegels while in the pump?
(2) - I find it really hard to get the silisleeve on. What's a good technique for getting it on that won't hurt too much? When I get used to either, I'll try wearing it to sleep though my fat kinda pulls on it. But I'm working on that; the weight loss should come. I'll try getting used to it at home so that I'm not going to work one day and find I need to adjust it while I'm helping a customer.
(3) - Cumming after a workout: Okay to do? Bad for gains? Should I refrain? Kinda hard to pump without some adult entertainment to keep the blood flowing, and one thing leads to another.
(4) - Also from what I read, it's important that the blood flow to the penis comes mainly from the air pressure and not from an erection? Can anyone elaborate on their experiences?
(5) I can't seem to retain pressure beyond 5Hg; it keeps dropping. Is it designed to do that or is there just not a good enough pressure seal? I did shave before this. I've just been holding the gun in my left hand and my mouse with my right hand so far, and pulling the trigger every minute or so to about 9Hg, wait for it to drop, rinse & repeat.
(6) - Weird question, about a couple weeks after the MityVac arrived I received an extra hose and additional set of sili-rings in the mail. Was that supposed to happen?

So far I've been dry-pumping without the silisleeve. I didn't see the instruction manual up here until after a few days after using it without the silicone base so I was actually using it wrong at first, placing the plastic part directly over my penis and that was it. The silicone base feels much better! But I wanna use the silisleeve if I can get it on me because I'd rather not have to buy lube all the time like gasoline. That and when your penis gets stuck to the plastic tube it's almost impossible to get it unstuck.

How much of permanent gains have you from dry pumping brother?